LSNVIC WP38 Smart Cooling Fan Magnetic Car Phone Holder User Manual
- June 16, 2024
- LSNVIC
Table of Contents
WP38 Smart Cooling Fan Magnetic Car Phone Holder
Product Information
Specifications
- Material: ABS + PC
- Input: 5V / 2A, 9V / 2A, 12V / 1.5A
- Output: 5W / 7.5W / 10W / 15W (max)
- Input Interface: Type-C
- Applicable Mobile Phones: iPhone 12 / 13 / 14 and above and mobile phones with wireless charging function (steel sheet is required)
- Applicable Scenario: Automobile air outlet
Product Description
The Smart cooling fan magnetic car phone holder WP38 is a convenient
accessory for your car that allows you to securely hold and charge your phone
while driving. It is designed to be installed on the air vent of your car and
is compatible with various mobile phone models.
Installation Steps
- Install the air vent clip as shown in the picture.
- Open the clip and insert the air vent blade.
- Adjust the angle of the mobile phone and the support rod.
- Tighten the knob to complete the installation.
Product Usage Instructions
Phone Charging
-
Use the Type-C cable provided in the package to connect the holder to the car charger.
Please use a QC3.0 fast car charger for optimal performance. -
If your mobile phone is iPhone 12 series or above, place the back of the mobile phone near the charging sensing area of the wireless charging bracket, and the mobile phone will automatically adsorb with the bracket.
-
If your mobile phone is iPhone 8 to iPhone 11 series or an Android system mobile phone, follow these steps:
-
Tear off the 3M glue of the steel ring provided in the package.
-
Paste the steel ring in the center of the back of the mobile phone.
-
Put the back of the mobile phone near the charging sensing area of the wireless charging bracket, and the mobile phone and the bracket will automatically adsorb.
-
Your mobile phone will start charging.
Product Features
- Built-in magnet for automatic adsorption
- One-touch charging
- Built-in new intelligent power management chip
Precautions
- Please place the product out of the reach of children.
- Avoid using the product in humid environments.
- Do not disassemble the product without authorization.
- Avoid violently hitting or bumping this product.
- Non-professionals should not attempt to open or repair this product.
- This product belongs to the motor gear bite control, so do not use external force to move the left and right clamp arms.
- This product requires QC2.0/QC3.0 and other formally certified car chargers to adapt.
- This product uses the principle of wireless charging and capacitive sensing, so it is put and used, touch and take.
Tips
Ensure the back of the phone does not have ring buckles, items that
increase the thickness of the phone, or metal objects. These items can affect
the use and charging efficiency of the phone’s wireless charging.
FAQ
-
Q: What type of car charger should I use with this product?
A: It is recommended to use a QC3.0 fast car charger for optimal performance. -
Q: Can I use this product in a humid environment?
A: No, it is not recommended to use this product in humid environments. -
Q: Can I disassemble or repair this product myself?
A: No, please do not disassemble or repair this product yourself. Seek professional assistance if needed. -
Q: Can I use this product with any mobile phone?
A: This product is compatible with iPhone 12/13/14 and above, as well as mobile phones with wireless charging function (steel sheet is required). -
Q: How does the wireless charging work?
A: Simply place the back of your mobile phone near the charging sensing area of the wireless charging bracket, and it will automatically adsorb and start charging.
User Manual
Smart cooling fan magnetic car phone holderWP38
Thank you for using this product, please read the instructions carefully before using
Product Parameters
- Material: ABS + PC Input: 5V / 2A, 9V / 2A, 12V / 1.5A
- Ou t put: 5W / 7.5W / 10W / 15W (max)
- Input Interface: Type-C
- Applicable Mobile Phones: iphone12 / 13 / 14 and above and mobile phones with wireless charging function (steel sheet is required)
- Applicable Scenario: Automobile air outlet
Product Description
Installation Steps
Install the air vent clip as picture.
Open the clip and insert the air vent blade, adjust the angle of the mobile phone and the support rod, and then tighten the knob to complete the installation
Phone Charging
- Use the Type-C cable in the package to connect the holder to the car charger.
- Please use QC3.0 fast car charger
- When your mobile phone is iphone12 series or above, place the back of the mobile phone near the charging sensing area of the wireless charging bracket, and the mobile phone will automatically adsorb with the bracket.
- When your mobile phone is iphone8 ~ iphone11 series or Android system mobile phone, tear off the 3M glue of the steel ring and paste the steel ring in the center of the back of the mobile phone. Then put the back of the mobile phone near the charging sensing area of the wireless charging bracket, and the mobile phone and the bracket will automatically adsorb.
- The mobile phone starts charging
Product Features
- built in magnet, automatic adsorption, one touch charging.
- built in new intelligent power management chip, the mobile phone does not need to be set, put it down for 0.1s and enter the wireless charging mode.
- luxury fast charging, rapid blood return without waiting. 15W fast charging makes you feel the fun of fast charging.
- soft atmosphere light, which is not dazzling.
- inductive charging can be realized as soon as it is placed, and 360 ° posture is not limited.
- low temperature in the whole process, fast charging, no scalding, safety and security.
- charging at full speed with case
Precautions
- Please place it out of the reach of children.
- Cannot be used in humid environments.
- It is forbidden to disassemble the product without authorization.
- Please avoid violently hitting or bumping this product.
- Non-professionals, please do not open or repair this product by yourself.
- This product belongs to the motor gear bite control, please do not use external force to move the left and right clamp arms.
- Pay attention that this product needs to be equipped with QC2.0/QC3.0 and other formal certified car chargers to adapt.
- His product uses the principle of wireless charging and capacitive sensing, which is put and used, touch and take.
Tips
The back of the phone cannot have ring buckles, items that increase the
thickness of the phone, or metal objects. The above items will affect the use
and charging efficiency of the phone’s wireless charging.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement : The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.