Beacon LIGHTING 246113 Replacement Exterior Wall Light Owner’s Manual
- June 16, 2024
- Beacon LIGHTING
Table of Contents
Beacon LIGHTING 246113 Replacement Exterior Wall Light
Product Information
Specifications
- SKU: 350037
- Globe Included: No
- Globe Quantity: 0
- Reversible: No
Product Usage Instructions
Installation Process
To install the replacement exterior lighting, please follow these steps:
- Ensure that the power to the existing exterior light is turned off at the circuit breaker.
- Remove the existing exterior light fixture by unscrewing any screws or bolts that secure it in place.
- Disconnect the electrical wiring from the old fixture. Make sure to note the wire connections for reinstallation.
- Attach the new replacement exterior light fixture to the mounting bracket or electrical box using the provided screws.
- Connect the electrical wiring from the new fixture to the corresponding wires in the electrical box. Match the black wire with black, white wire with white, and ground wire with ground.
- Tuck the connected wires into the electrical box and secure the fixture in place by tightening the screws or bolts.
- Turn on the power at the circuit breaker and test the new exterior light to ensure it is functioning properly.
Additional Installation
If you require additional exterior light installations, please note that each additional installation will cost $90. Our installation service only applies to products purchased from Beacon Lighting.
Contact Information
If you have any questions or need further assistance, please contact our support team:
- Email:support@beaconlighting.com.au
- Phone: 03 8561 1599
Date Printed
The user manual was printed on 20 March 2023.
FAQ
Q: Can I install the replacement exterior lighting myself?
- A: Yes, you can install the replacement exterior lighting yourself by following the provided installation instructions.
- However, if you prefer professional installation, our service is available for a fixed price.
Q: Are the necessary screws and wiring included with the replacement exterior lighting?
- A: Yes, the necessary screws for mounting the fixture and wiring for connecting to the electrical box are typically included with the replacement exterior lighting.
Q: Can I use the installation service for exterior lights purchased from other retailers?
- A: No, our installation service is only applicable to products purchased from Beacon Lighting.
- For works outside this scope, please discuss with your electrician on the day of installation.
Replacement Exterior Lighting Installation Service – Additional
DESCRIPTION
- Pay a fixed price of $195 for your exterior light replacement installation and $90 for every additional installation.
- Installs are only applicable to products purchased from Beacon Lighting.
- Any works outside this scope will be discussed with your electrician on the day of installation.
This service includes:
- Like-for-like replacement’ which means the new light must be installed in place of an existing light using the existing wiring/connections
- Disconnection and removal of the existing light and installation of the new light
- Safety certificate or compliance certificate as applicable
- Disposal of packaging and site clean-up
- Travel distance of 20km from the Beacon store of purchase
- Maximum 5m installation height
SPECIFICATIONS
- SKU 350037
- Globe Included No
- Globe Quantity 0
- Reversible No
- support@beaconlighting.com.au
- 03 8561 1599
- Date printed 20 March 2023
Documents / Resources
|
Beacon LIGHTING 246113 Replacement Exterior Wall
Light
[pdf] Owner's Manual
246113 Replacement Exterior Wall Light, 246113, Replacement Exterior Wall
Light, Exterior Wall Light, Wall Light, Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>