Beacon LIGHTING 250919 Elke LED Mirror Light Instruction Manual

: September 5, 2022
: Beacon LIGHTING

Table of Contents

Beacon LIGHTING 250919 Elke LED Mirror Light
ELKE LED MIRROR LIGHT
Warranty
Installation requirements
Operation directions
Installation Instructions
Safety tips
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Beacon LIGHTING 250919 Elke LED Mirror Light

ELKE LED MIRROR LIGHT

SKU# 250918, 250919
Rated Voltage 5V DC 1A
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and use of the product. Please keep the instructions for future reference.

Warranty

This product is covered by a 12 month warranty. Please retain proof of purchase.
Warranty will be void if there is any damage due to improper usage or modification to the product.
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void warranty.

Installation requirements

Select a suitable location for the luminaire;
- Ensure it is on a flat and stable surface.
- This luminaire is suitable for indoor use only.
- Keep away from liquids, dusty, humid, direct sun light, or hot areas.
Lay out all the components on a smooth surface and make sure there are no components missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.

Operation directions

Operation:
Turn the Rotary handle to switch on/off the light.
Charging:
- Charge the luminaire via the USB charging port provided on the back of the luminaire.
  NOTE : Charging indicator will be red when charging and will become green when fully charged.
  NOTE: Please ensure an appropriate power adaptor is used according to the rated input (5V DC, 1A) of this luminaire.

Installation Instructions

Safety tips

Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning or adjustment to the luminaire.
To avoid injury or damage to the luminaire, ensure that the power lead is secure before connecting the power.
Select a suitable location away from liquids and hazards.
DO NOT USE the luminaire while in bath or shower.
The luminaire is not a toy. Young children should be supervised to ensure that they do not play with the luminaire.
The luminaire includes a built-in Li-ion battery. The battery of this luminaire is not replaceable; when the battery reaches its end of life the whole luminaire shall be replaced. Contact your local council to safely dispose of the battery.
Handle the luminaire and/or mirror with care to avoid any damage or breakage.
Ensure that the luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.
To clean, wipe with a damp clean cloth. Never soak the luminaire with water.