Teleflex DLX-200-USH Ultrasound Probe Holder Owner’s Manual

: June 16, 2024
: Teleflex

Table of Contents

Teleflex DLX-200-USH Ultrasound Probe Holder
Product Information
Product Usage Instructions
FAQ
INSTRUCTION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Teleflex DLX-200-USH Ultrasound Probe Holder

Product Information

Specifications

Product Name: DLX-200-USH Ultrasound Probe Holder
SKU / Article #: DLX-200-USH
Sales Quantity/Case: 1

The DLX-200-USH Ultrasound Probe Holder is a tip positioning system designed for vascular access procedures. It provides stability and support for ultrasound probes, allowing for accurate imaging and precise needle placement. Please note that the actual product specifications may vary from the representative photo shown in the catalog. Availability of the product may also vary by country, so it is recommended to contact your local representative for more information. For detailed information on indications, contraindications, warnings, and instructions for use, please refer to the Product Instructions for Use (IFU) available under the Documents section on this page.

Product Usage Instructions

Step 1: Preparation

Before using the DLX-200-USH Ultrasound Probe Holder, ensure that you have read and understood the Product Instructions for Use.
Inspect the probe holder for any visible damage or defects. Do not use if the holder appears to be damaged.
Clean the probe holder using a mild detergent and warm water. Rinse thoroughly and allow it to air dry before use.

Step 2: Installation

Identify a suitable location to mount the ultrasound probe holder. It should be within easy reach and provide a stable surface.
Attach the holder securely to the mounting surface using the provided screws or adhesive, ensuring it is firmly in place.

Step 3: Probe Placement

Place the ultrasound probe into the holder, ensuring that it fits snugly and securely.
Adjust the angle and position of the holder to achieve the desired imaging plane for your procedure.
Ensure that the ultrasound probe is aligned with the needle insertion site to guide precise needle placement.

Step 4: Procedure
Proceed with your vascular access procedure as guided by the ultrasound imaging. The DLX-200-USH Ultrasound Probe Holder will provide stability and support to enhance accuracy and safety.

FAQ

Q: Can the DLX-200-USH Ultrasound Probe Holder be used with any ultrasound machine?
A: Yes, the DLX-200-USH Ultrasound Probe Holder is compatible with most ultrasound machines. However, it is recommended to check the compatibility with your specific ultrasound machine model.
Q: Are there any special cleaning instructions for the probe holder?
A: The probe holder can be cleaned using a mild detergent and warm water. Ensure thorough rinsing and allow it to air dry before use. Avoid using harsh chemicals or abrasive materials that may damage the holder.
Q: Can I adjust the angle and position of the probe holder during a procedure?
A: It is recommended to adjust the angle and position of the probe holder before starting the procedure. During the procedure, it is best to avoid unnecessary movements to maintain stability and accuracy.

INSTRUCTION

SKU / Article #: DLX-200-USH
Sales Quantity/Case: 1

The products in this catalog may not be available in all countries. Please contact your local representative.
Indications, contraindications, warnings and instructions for use can be found in the Product Instructions for Use available under the Documents section on this page, where an IFU is available.