nVent CADDY CM912812M EM-MR Conduit To Flange Clip With Retainer Owner’s Manual
- June 16, 2024
- nVent Caddy
Table of Contents
EM-MR CONDUIT TO FLANGE CLIP WITH RETAINER, 1/2″, 3/4″ EMT,
0.709″–1.181″ OD
CATALOG NUMBER
CM912812M
FEATURES
Only one piece to install
Fast hammer-on installation
Pre-riveted retainer strap is easily bent into position
PRODUCT ATTRIBUTES
Material: Spring Steel
Finish: nVent CADDY Armour
EMT Conduit Size: 1/2″;3/4″
Rigid Conduit/Pipe Size: 1/2″;3/4″
Outer Diameter: 0.709″ – 1.181″
Flange Thickness: 9/16″ – 3/4″
Static Load: 75 lb
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and
from your nVent customer service representative. Improper installation,
misuse, misapplication or other failure to completely follow nVent’s
instructions and warnings may cause product malfunction, property damage,
serious bodily injury and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support| Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793| Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404| APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
---|---|---|---
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>