Riddost 2.25 Cub Large Biometric Fireproof Home Safe Instructions

Table of Contents

Riddost-2-25-Cub-Large-Biometric-Fireproof-Home-Safe-
PRODUCT

Please read the manual carefully and use this product strictly according to the operating instructions.
Make sure the safe and installation manual are all in the package when you first receive it before using it.
Check the safe with your hands on both sides.
Press the emergency key to enter the safe.
Please check the emergency key whether it is the place flag, if not found, please contact us for the first time.
We highly recommend that you set a password after opening the door for the first time.

Notice

First, insert the emergency key to the hold in the first opening.
Then turn off the key, turn right then back to open the door.
First opening: 15% of the battery can be on the back of the door after the batteries.

Please ensure that before leaving the key out of the safe you close the door.

Emergency Opening

When all code and code words to open are forgotten, use the “782036” — master code.

What should I do if the keypad and fingerprint reader aren’t responding?
Try replacing the batteries and ensuring that the emergency key is not inside the safe.
How do I set or change the user code?
You can set or change the user code by pressing the reset button, entering the new code, and confirming with the “∗” key.
Can I open the safe if I forget both the user code and fingerprint?
Yes, you can use the master code “782036” to open the safe in case of an emergency.
What does “Err” on the LCD indicate?
“Err” indicates that incorrect codes or fingerprints have been entered multiple times, activating the alarm system.

Please keep the emergency keys out of the safe.

Please read the manual carefully and use this product strictly under the operating procedures manual
Please make sure the safe and instruction manual are all in the package when you give your friend as a gift
Please fix the safe with at least 2 rivets before using
Please use the emergency key to open it at the first use
Please check whether the emergency KEY whether in the plastic bag if not found, please contact us the first time
We highly recommend that you set a password after opening the door for the first time

Riddost-2-25-Cub-Large-Biometric-Fireproof-Home-Safe-
FIG-1

Alarm System

If the codes or fingerprints are wrong, the LCD will show
“Error” and back to sleep status;
Five continuously wrong entries will activate the warning beep for 1 minute;
You may press the key “*” to clear any incorrect digit you have input.
CAUTION: You can only stop the beeps by opening the safe with an emergency key or inputting the right codes and fingerprints.

Set the user code

Please open the safe at the standby stats;
Press the reset red button inside the door and the LCD will show “—“;
Input the new user code(3 to 8 digits), and press the “#” button to confirm, indicating that the password is set successfully by showing “INTO”.

Fingerprints collect (20 fingerprints)

Please press the green button when the door is open;
Put your finger 3 times at the finger collector screen where the white light is on;
After about a second, a long “Bleep” and green light means that fingerprint registration has succeeded;
3 times short “Bleep” means registration failed, the finger collector shows a red light, a display shows “Error” ;
Please press the green button for 3 seconds, a long Beep and the display shows “CLEAR”, all the registered fingerprints are deleted.

Security display feature

The safe is equipped with a security display feature, using this feature means that your code will not be displayed on screen when the safe is open.
Press “#” to wake up the system;
Press “*” to start up the hidden code function. Any code you input will show “. _” in the display, which can ensure your code is safe;
You can press “*” twice to cancel this function;

Vibrate warning

The safe will alarm once be moved or shocked.
When the screen is at stand-by status, press”0″ once,” -” The screen will display ON”. The safe alarm will go on once the safe is punched or shocked.
Input the correct user code or master code, this alarm will stop, and the warning status disappear. If not, the alarm will last 1 minute, and the warning status is still on work.

Set the date and time

In a closed state, press “*” to go into modify status;
Press the “#” button to convert between values;
Press “O” to “9” to input the values for “year” “month”. “date”, “time”, and “minute”, it will confirm and save automatically then go back to standby status;
The system will identify the validity of the input, and the invalid values beyond the range are not confirmed, valid range can refer to: year: 00~99, month: 01 12, date: 01~31, time: 00~23, minute: 00~59;
3 seconds without any operation during the setting, the system will exit and modify status automatically, and all changes that have been done will be cleaned out.

“OPEN”;

Picture 1

Riddost-2-25-Cub-Large-Biometric-Fireproof-Home-Safe-
FIG-2

Express: On-screen display 05-PASS1 (Indicates item 5 of the door opening record, user password to open the door)
Picture 2

Riddost-2-25-Cub-Large-Biometric-Fireproof-Home-Safe-
FIG-3

Express: Monday December 20, 2021 20:44

Then will show which code was used to open the door;
“PASS 1” —–user code;
“PASS 2”—–master code;
“PASS 3” — Fingerprint code
Input 0 to check the last record before this one, and Input 8 to check the earliest record.

CAUTION: the system can store 45 records of opening the safe.