Metrel MI 3108 Photovoltaic And Electrical Installations Tester Eurotestp Instructions

September 27, 2024
METREL

MI 3108 Photovoltaic And Electrical Installations Tester Eurotestp

“`html

Specifications

Photovoltaic Installation Measurements

  • Function: Photovoltaic Installation Measurements
  • Measuring Range:
    • Voltage
    • Current
    • Power U / I curve
    • Irradiation Temperature

Electrical Installation Measurements

  • Function: Electrical Installation Measurements
  • Measuring Range:
    • Voltage
    • Basic accuracy
    • Insulation resistance (EN 61557-2)
    • Continuity, 200 mA (EN 61557-4)
    • Continuity, 7 mA
    • Loop impedance (EN 61557-3)
    • Line impedance (EN 61557-3)
    • Frequency Phase sequence (EN 61557-7)
    • RCD testing (EN 61557-6)
    • Contact voltage UC

General

  • Display: 128 x 64 dots matrix display with backlight

  • Power supply: 6 x 1.2 V NiMH batteries, type AA

  • Overvoltage category: CAT II / 1000 VDC; CAT III / 600 V; CAT
    IV / 300 V

  • Protection class: double insulation

  • COM port: RS232 and USB

  • Dimensions: Main unit – 230 x 103 x 115 mm, Remote unit – 140 x
    230 x 80 mm

  • Weight: Main unit – 1.3 kg, Remote unit – 1.0 kg

Product Usage Instructions

Photovoltaic Installation Measurements

To measure photovoltaic installations, follow these steps:

  1. Turn on the tester and select the Photovoltaic Installation
    Measurements function.

  2. For each parameter (voltage, current, power U/I curve,
    irradiation temperature), input the appropriate range and record
    the readings.

Electrical Installation Measurements

To conduct electrical installation measurements, use the
following procedure:

  1. Power on the device and choose the Electrical Installation
    Measurements function.

  2. Select the specific measurement you want to perform (voltage,
    insulation resistance, continuity, loop impedance, line impedance,
    etc.).

  3. Enter the required parameters and record the results
    accordingly.

FAQs

Q: Can the tester be used for both photovoltaic and electrical

installations?

A: Yes, the MI 3108 EurotestPV tester is designed to perform
measurements for both photovoltaic and electrical
installations.

Q: What are the optional accessories available for this

product?

A: Optional accessories include the EurotestPV Remote, Plug
commander, Tip commander, Current clamp, Barcode scanner, Earth
wire sets, etc. For more details, refer to the ordering information
section.

“`

Photovoltaic and electrical installations tester MI 3108 EurotestPV

Electrical Installation Safety

READY

MEASURING FUNCTIONS
Photovoltaic installations: · Measurements on DC side of PV installation: · Voltage, current, power; · Uoc (Open Circuit Voltage) and Isc (Short
Circuit Current); · I – U curve of PV modules and strings; · Irradiance; · Module temperature. · Measurements on AC side of PV installation: · Voltage, current, power; · Efficiency of PV module, inverter, PV system
calculation.
Electrical installations: · Insulation resistance; · Continuity of PE conductors; · Line impedance; · Loop impedance (sub-functions with high
current and without RCD tripping); · RCD testing (type AC, A and B); · Earth resistance; · AC current (load and leakage); · TRMS voltage, frequency, phase sequence; · Power, energy, harmonics.
KEY FEATURES
Photovoltaic installations: · Calculation of STC values: the measured
current and voltage values are, according to environment conditions, recalculated to Standard Test Condition values which makes possible, to compare the results even if they were taken under different test conditions.

· Graphical representation: the I-V characteristic of PV module or string is graphically represented on LCD display.
· Power and efficiency measurements: 2 voltage & 2 current channels for simultaneous AC & DC parameters measurements.
· PV Remote Unit: Optional unit for simultaneous measurements of solar irradiation and temperature of PV module.
Electrical installations · RCD Auto: Automated RCD testing
procedure significantly reduces test time. · Trip Lock function: Loop impedance test are
performed without tripping the RCD. · B type RCD testing: is supported. · Earth resistance measurement: instrument
supports 3-wire earth resistance testing. · Built-in fuse tables: for automatic evaluation
of the line / loop impedance results. · Online voltage monitoring: monitors all 3
voltages in real time. · Scope function: real-time U/I scope. · Harmonics analysis: 1-phase power and
energy measurements with up to 11th harmonics analysis is supported. · Memory: Up to 1800 test results or up to 500 graphical results with timestamp can be stored in internal memory. · BT connectivity: it enables BT communication with Android tablets and smart phones via optional BT dongle. · Android application: enables advanced data management APP EuroLink PV and EuroLink Android.

www.metrel.si

MI 3108 EurotestPV is a combined photovoltaic tester and electrical installations safety tester. It enables complete testing of electrical installations according to EN 61557 standards and in addition performs all necessary tests required on single-phase photovoltaic (PV) installations. This includes all of the tests as required by EN 62446, but also includes I – U characteristic, Calculation of STC values as required by EN 61829 and power measurements on Inverter’s DC and AC sides. The unit is designed for the demanding working conditions (up to 1000 V, with 15 A DC). To greatly improve user safety the MI 3108 EurotestPV comes with the PV Safety Probe which ensures safe disconnection every time.
· PC SW EuroLink PRO enables downloading, uploading, review, analyses and printing of test results.
APPLICATION
· Testing, evaluations and troubleshooting of photovoltaic installations.
· Power and energy efficiency measurements (AC and DC).
· Initial and periodic testing of domestic and industrial single and three- phase electrical installations.
STANDARDS
Functionality · IEC/EN 61557 series; · IEC 62446 (photovoltaics); · IEC 61829. Other reference standards for testing · BS 7671; · EN 61008; · EN 61009; · EN 60364-4-41; · AS/NZ 3017 Electromagnetic compatibility · EN 61326 Safety · EN 61010-1; · EN 61010-2-030; · EN 61010-031; · EN 61010-2-032

TECHNICAL DATA

PHOTOVOLTAIC INSTALLATION MEASUREMENTS

Function

Measuring range

Voltage
Current
Power U / I curve Irradiation Temperature

0 VDC … 999 VDC 0 VAC … 999 VAC I-V m.: 0 VDC … 999 VDC Panel m.: 0.0 mA … 300 ADC Invert. m.: 0.0 mA … 300 AAC I-V m.: 0.00 A … 15 ADC Panel m.: 0 … 999 kW I-V m.: 0 … 14.99 kW 1000 V / 15 A / 15 kW 000 … 1.75 kW/m2 -10.0 °C … + 85.0 °C

Basic accuracy ±(1 % of reading + 2 digits) ±(1.5 % of reading + 3 digits) ±(1 % of reading + 2 digits) ±(1 % of reading + 2 digits) ±(1.5 % of reading + 3 digits) ±(1 % of reading + 2 digits) ±(2.5 % of reading + 6 digits) ±(2 % of reading + 3 digits)
±(4 % of reading + 5 digits) ± 5 digits

ELECTRICAL INSTALLATION MEASUREMENTS

Function

Measuring range

Basic accuracy

Insulation resistance (EN 61557-2) U = 50, 100, 250 VDC: R: up to 199.9 M U = 500 VDC, 1 kVDC: R: up to 999 M

Continuity, 200 mA (EN 61557-4) 0.00 … 1999

Continuity, 7 mA

0.0 … 1999

Loop impedance (EN 61557-3) 0.00 … 9.99 k

Line impedance (EN 61557-3)

0.00 … 9.99 k

Voltage

0 VAC … 550 VAC

±(5 % of reading + 3 digits)
±(5 % of reading + 3 digits) ±(3 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 5 digits) ±(5 % of reading + 5 digits) ±(2 % of reading + 2 digits)

Frequency Phase sequence (EN 61557-7) RCD testing (EN 61557-6) Contact voltage UC

0.00 Hz … 499.9 Hz

±(0.2 % of reading + 1 digits)

1.2.3 or 3.2.1

IN: 10 mA, 30 mA, 100 mA, 300 mA, 500 mA, 1 A

0.0 V … 99.9 V

(-0 % / +15 %) of reading

Trip-out time Trip-out current Earth resistance (EN 61557-5) Energy Harmonics

0 ms … 40 ms 0.2 x IN … 2.2 x IN 0.00 … 9999 0.000 Wh – 1999 kWh up to 11th

±1 ms ±0.1 x IN ±(5 % of reading + 5 digits)

General
Display
Power supply Overvoltage category Protection class COM port Dimensions Weight

Main unit

Remote unit

128 x 64 dots matrix display with backlight

128 x 64 dots matrix display with backlight

6 x 1.2 V NiMH batteries, type AA

6 x 1.2 V NiMH batteries, type AA

CAT II / 1000 VDC; CAT III / 600 V; CAT IV / 300 V

double insulation

RS232 and USB

RS232

230 x 103 x 115 mm

140 x 230 x 80 mm

1.3 kg

1.0 kg

PV SYSTEM PARAMETERS
DC

AC

Uoc, Isc PMPP I-V curve

Power

Irradiance, TCELL

DC disconnect
01
DC/AC Inverter

AC isolator

0123 KWh Generation meter

Main

01

Isolator

Display unit
00123 KW 0023 KWh 3123 CO2

Main consumer unit

0123 KWh Utility meter

DNO supply

PSOLAR

MODULE

SYSTEM IINPUT

INVERTER

POUTPUT

EFFICIENCIES

METREL D.O.O. Measuring and Regulation Equipment Manufacturer Ljubljanska 77, SI-1354 Horjul, Slovenia T +386 (0)1 75 58 200 metrel@metrel.si www.metrel.si

Note! Photographs in this catalogue may slightly differ from the instruments at the time of delivery. Subject to technical change without notice.

ORDERING INFORMATION

MI 3108 ST · Instrument MI 3108 EurotestPV · A 1552 Large carrying bag · A 1053 Schuko-plug test cable · A 1193 Test lead, 3 x 1.5 m · A 1016, A 1062, A 1015, A 1014 Test probe,
4 pcs (red, green, blue, black) · A 1064, A 1309, A 1310, A 1013 Crocodile
clip, 4 pcs (red, green, blue, black) · A 1384 PV Safety Probe · S 2145 PV MC3/4 male/female adapters · A 1427 PV Reference Cell · A 1400 Temperature probe · A 1707 Set of carrying straps · USB and RS232 – PS/2 cable · Power supply adapter + 6 NiMH batteries,
type AA · PC SW EuroLink PRO · Short instruction manual · Instruction manual and handbook on
storage media · Calibration certificate
MI 3108 PS · MI 3108 ST · A 1378, A 1414 EurotestPV Remote · A 1401 Tip commander · PC SW EuroLink PRO Plus licence

OPTIONAL ACCESSORIES

Photo

Order No. Acc. description
A 1378 EurotestPV Remote

A 1314 Plug commander

A 1401 Tip commander

A 1018 A 1391 A 1105

Current clamp (low range, leakage)
AC/DC Current clamp
Barcode scanner

A 1431 EuroLink Android

A 1436 Bluetooth dongle

A 1385 PV fused test lead

S 2026 S 2027 A 1292

Earth 20 m set, 3 wire
Earth 50 m set, 3 wire
Upgrade code EuroLink PRO to EuroLink PRO Plus

Services d’EURO-INDEX

EURO-INDEX est un fabricant, importateur et distributeur de diverses marques A dans le domaine des instruments de test et de mesure. Nous fournissons également une large gamme de services pour optimiser l’utilisation de ces instruments dans vos activités. Ces services comprennent naturellement l’entretien, la réparation et l’étalonnage des instruments, mais nous proposons aussi une assistance sous forme de formation via notre EURO-INDEX Academy et la location d’instruments.

Centre de Service Agréé EURO-INDEX est un Centre de Service Agréé pour toutes les marques représentées. Cela signifie que vos instruments sont pris en charge par des techniciens formés par le fabricant et disposant des outils et logiciels adéquats. Seules des pièces d’origine sont utilisées et la garantie de votre instrument, ainsi que les certifications (ATEX, EN50379, etc.) restent intactes.
Laboratoire de maintenance et de calibrage Le laboratoire des Pays-Bas est accrédité RvA selon la norme EN-ISO/IEC 17025. Cette accréditation est valable pour différentes grandeurs, telles que spécifiées dans le champ d’application associé au numéro d’accréditation K105. Les certificats de calibrage RvA sont acceptés à l’international et équivalents à ceux de BELAC.
Plus d’infos

Service Mobile

Outre les laboratoires d’étalonnage fixes de Zaventem et de

Capelle aan den IJssel, nous disposons également d’un laboratoire

itinérant appelé “Service mobile”. Nos services puisse venir vers

vous, en offrant une qualité équivalente.

Plus d’infos

MQS®

MQS® est une formule d’entretien exclusive comportant un entre-

tien et un calibrage périodiques de vos instruments de mesure à

un coût fixe et faible. Via un portail Web gratuit (monmqs.be), vous

avez toujours accès à vos certificats de calibrage.

Plus d’infos

Location d’instruments de mesure Vaste assortiment Précision démontrable par le certificat d’étalonnage actuel Conseils avisés Les instruments sont livrés avec leurs accessoires Plus d’infos

EURO-INDEX Academy Formations et seminars Vidéos de démonstration et d’instruction Notes d’application

Plus d’infos

Comptoir de service

Entretien, réparation et calibrage

Formations et seminars

Service Mobile

Sous réserve de modifications EURO-INDEX® FR 23001

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals