Riddost 4.2 Safe Box Fireproof Waterproof User Manual

Riddost 4.2 Safe Box Fireproof Waterproof User Manual

GETTING STARTED

1. Read and understand this manual and all safety signs before using this appliance.

2. Indoor use only.
   This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.

3. Set password.
   Please use the emergency key and master key to open the safe for the first time.
   Please note that emergency keys and master keys are not in the safe.
   Please set password after opening the safe for the first time.

PACKING LIST

Warm Tips: If you find accessories missing, please feel free to contact us, we will help you solve the issues in time. We’d like to address any issues or concerns you have.

INTRODUCTION

1. Handle (square)
2. Keyhole (master key)
3. Digital keypad
4. LCD display
5. Keyhole (emergency key)
6. Removable shelf
7. Inner box
8. LED light
9. Reset button
10. Internal battery box
11. External battery case

NOTE:

1. The ” # “ button means “ Save “, and the ” * ” button means ” Delete.
2. There will be a ” beep ” every time the number button is pressed, indicating that the number input is successful.
3. If there is no continuous input for more than 10 seconds after pressing one button, the safe will enter sleep mode, all previous operations will stop. Press the ” # ” button to wake up the LCD display.
4. If enter the correct password, it will display ” =OPEN- “, you can open the safe; If enter the wrong password, it will display “ =Error- “, you can’t open the safe.
5. “L-BAT ” means the battery is undervoltage, please replace the battery in time.

OPENING

There are 2 ways to open the safe:

Opening for the first time: Master key + Emergency key + Square
Step 1: Insert the Master key, turn the key. (Clockwise)
Step 2: Insert the Emergency key, turn the key. (Counterclockwise)
Step 3 : Press the Emergency key down and turn the square. (the two actions need to be carried out at the same time)

NOTE: After opening the safe for the first time

1. Please install the Internal 4 AA batteries (refer to @0).
2. Please set a password.
3. Please do not store keys in the safe.

Opening after setting a password: Master key + Password + Square
Step 1: Insert the Master key, turn the key. (Clockwise)
Step 2: Enter password, press ” # ” button to save password.
Step 3: Turn the square.

NOTE: Please leave master keys and emergency keys outside the safe.

1. If you forget the password or the battery is dead, please use the emergency key and master key to open the safe. Then reset the password after opening the safe.
2. If you enter the wrong password for 3 consecutive times, a 60-second buzzer will be triggered. If 3 wrong password are entered again after 60 seconds, the sound will continue for 60 seconds.
3. If you lost the keys, please send us the keyhole code and provide relevant info, we will configure the keys for you for free.

SETTINGS

How do | set up a personal password?

Step 1 , open the safe;
Step 2 , press the reset button [ referto @ ;
Step 3 , enter a new 3~8-digit password, and press ” # ” button to save;
When the screen displays ” -into- “, means the password is set successfully:

How do l set up an administrator password?

When you forget your personal password, use the administrator password to open the safe.
Step 1. Open the safe;
Step 2. Press the ” 0 ” button twice, the number ” 00 ” will be displayed on the screen;
Step 3. Press the reset button [ refer to ©) ;
Step 4. Enter 3~8-digit administrator password, and press ” # ” button to save;
When the screen displays ” Into “, means the administrator password is set successfully.

How do | set up an alarm?

1. Automatically trigger an alarm;
   Entering the wrong password 3 times in a row, the alarm will be triggered and sounds for 60 seconds. Entering the correct password will turn off the alarm.

2. Set the vibration alarm;
   Step 1. safe in sleep mode;
   Step 2. press the ” 0 ” key once, the screen will display “ALM-ON”;
   The safe enters a vibrating alarm state. If someone vibrates the safe, it will sound an alarm and display an alarm icon.

To Stop the alarm:

1. The alarm sound will stop automatically after T minute;
2. Enter the correct password within 1 minute, the alarm sound will stop;

Note: The alarm stops, but the alarm status will remain active.

How do l set up the date and time?

Step 1. When the safe is powered on for the first time, the default date and time is 00-01-01, 00:00, Saturday;
Step 2. Enter the correct password to open the door;
Step 3. Within 2 seconds after ” OPEN- ” disappears from the display, press the ” *** ” button, you will see the beating options on the display;
Step 4**. Enter the Year, Month, Day, Hour, Minute, the system will save your settings.
The week will be automatically updated to match the date.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>