QAZQA Malios P80 Outdoor Lamp Instruction Manual
- June 4, 2024
- QAZQA
Table of Contents
Malios P80 Outdoor Lamp
Instruction Manual Molios P80
91364/45094
SAFETY INSTRUCTION
Please study the instruction manual and the below information carefully before
installing or using this product.
Please keep this user manual for further reference
-
The luminoires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
-
Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
-
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance, or repair work is undertaken.
-
Exterior lighting must not be installed during rain.
-
Toke account of the minimum separation distance from other objects and the room required around the fitting.
-
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
-
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
-
When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
-
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
-
Take account of all available technical information.
-
Take note of the symbols when connecting wires:
N =Neutral
L =Live
=Earth -
Meaning al symbols:
| For indoor use only, where direct contact with water is impossible
This icon indicates the level of water-proof and dust-proof
Protection Class I: the fitting must be earthed
Protection Class Ill: the fitting is low voltage
Protection Class II: the fitting is doubled insulated and does not require
earthing
Minimum distance from lighted objects (meters)
Only the self-shielded halogen lamp should be used with the luminaire
M Strip the wire lo the indicated length (mm); different items require
different length
Connect using the specified cable; different items require different cables
The type of lamp and maximum size and wattage indicated in each lighting unit
must not
be exceed; different items require different kind of light sources with
different bulb icons
The armature is designed to work only with the indicated voltage. Different
items require different working voltages.
the luminaire can be used in combination with a dimmer
The reference light angle and light space of the luminaire
This luminaire cannot be disposed of together with normal domestic waste in
standard rubbish can, but you have to bring it to a staging area for
electrical waste
---|---
FittinQ B.V.
Smaragdweg 52, 5527 LB Haper!, The Netherlands
www.qazqa.nl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>