QAZQA 45475 Steel ground pin with mounting material Instruction Manual

QAZQA 45475 Steel ground pin with mounting material Instruction Manual

SAFETY INSTRUCTION

Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference.

1. The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.

2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.

3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.

4. Exterior lighting must not be installed during rain.

5. Take account of the minimal separation distance from other objects and the room required around the fitting.

6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.

7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.

8. When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.

9. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components

10. Take account of all available technical information.

11. Take note of the symbols when connecting wires:
    N =Neutral L =Live =Earth

12. Meaning of symbols:

13. For indoor use only, where direct contact with water is impossible
    

14. This icon indicates the level of water-proof and dust-proof
    

15. Protection Class I: the fitting must be earthed
    

16. Protection Class II: the fitting is doubled insulated and does not require earthing
    

17. Protection Class Ill: the fitting is low voltage
    

18. Minimum distance from lighted objects (meters)
    

19. Only the self-shielded halogen lamp should be used with the luminaire
    

20. Strip the wire to the indicated length (mm);different items require different length
    

21. Connect using the specified cable; different items require different cables.
    

Dimension

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.qazqa.nl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>