WASP WDI4500 Barcode Scanner Instructions

Portal > Knowledgebase > Hardware > Scanners > WDI4500 > WDI4500: How to enable or disable the ability to scan programming barcodes in the User Manual.

WDI4500 Barcode Scanner

WDI4500: How to enable or disable the ability to scan programming barcodes in the User Manual.
Sicaro Burnett – 2023-01-20 – in WDI4500
In order to scan programming barcodes in the WDI4500 Users Manual, the scanner must have parameter scanning enabled. Normally, parameter scanning is only disabled to prevent users from modifying saved configurations. These barcodes are also found in
Chapter 2 – Interface Setup in the Wasp WDI4500 Users Manual.

WDI4500 Parameter Scanning Barcodes:
https://dl.waspbarcode.com/kb/scanner/WDI4500ParameterScanning.pdf
To Disable Scanning Parameter Barcodes (including the Set Defaults parameter barcodes): Scan the Disable Parameter Scanning barcode.

To Enable Scanning Parameter Barcodes: Scan the Enable Parameter Scanning barcode.

Related Pages
Scanner User Manuals, Programming Reference Guides, Quick Reference Guides, Quick Start Guides (multiple models) manual

References

• Wasp Helpdesk
• Knowledgebase - Wasp Helpdesk
• Scanner User Manuals, Programming Reference Guides, Quick Reference Guides, Quick Start Guides (multiple models) manual - Knowledgebase / Hardware / Scanners / Manuals and Drivers - Wasp Helpdesk
• WDI4500: How to enable or disable the ability to scan programming barcodes in the User Manual. - Knowledgebase / Hardware / Scanners / WDI4500 - Wasp Helpdesk
• Knowledgebase / Hardware - Wasp Helpdesk
• Knowledgebase / Hardware / Scanners - Wasp Helpdesk
• Knowledgebase / Hardware / Scanners / WDI4500 - Wasp Helpdesk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>