Wasp DR5 Mobile Barcode Scanner Owner’s Manual
- June 8, 2024
- Wasp
Table of Contents
DR5 Standard Gun Grip
Quick Start Guide
V1.0
Package
Please make sure the following contents are in the gun grip box. If something is missing or damaged, please contact your Wasp representative.
- DR5 standard gun grip
- Wrist Strap
- Quick Start Guide
Note:
- The gun grip is only applicable to the DR5 with the bumpers on.
- It is strongly recommended to use the DR5 with the 6000mAh battery
Assemble with DR5:
- Place the 2 top corners of the DR5 into the top of the gun grip.
- Press the bottom of the DR5 into the gun grip.
- Ensure 2 top corners and 2 hooks of gun grip fit securely with the DR5.
Disassembly from DR5:
Slightly pull the 2 hooks of the gun grip and lift the bottom of the device to remove from the gun grip.
Caution!
- To ensure the unit is working properly, please keep all connectors away from contaminants such as dust, grease, mud, and water. Negligence may cause the unit to short circuit, overheat or may prevent it from communicating.
- If the connector is damaged, please ensure the connector is fully repaired before using the unit to avoid causing the device to short circuit.
For more information about Wasp products, visit
www.waspbarcode.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>