ATAG WS, ES Serise Cooker Hood User Manual

cooker hood
Instructions for use

WS9074MN/WS1274MN/WS90274MC/WS12274MC
ES1074MN/ES1274MN/ES10274MC/ES12274MC

YOUR COOKER HOOD

Introduction

By reading these user manuals you will soon become familiar with the features of this appliance. Please read the appliance’s safety and maintenance instructions.
Please retain the operating and installation instructions as these may be useful for future reference.
Please read the separate safety instructions prior to use.
You can find the most recent version of the instructions for use on our website.

USE

Description

1. Switching on/off and dimming the lighting
2. Reducing air extraction capacity and switching off
3. Cleaning filter indicator
4. Proximity sensor
5. Display status
6. Proximity sensor
7. Wifi icon (‘Connected’ models / See ‘Manual connect Life’)
8. Switching on and increasing air extraction capacity
9. Timer function indicator

Operation

Switching extraction on and off

• Press the ‘+’ key. The cooker hood will switch on at the lowest setting.
• Press the ‘+’ key again to set a higher extraction setting. Press and hold the ‘+’ key for 2 seconds to select the highest setting (boost) (see the switching on boost setting). The extraction setting can be set between speeds level 1 to 5 or 9.
• Press the ‘-’ key to select a lower setting.
• If the extraction setting is set at 1, you can switch off the cooker hood by quickly pressing and releasing the ‘-’ key.
• To switch off the cooker hood from whatever setting press and hold the ‘-’ key for at least 2 seconds.

Alter the number of speed-settings
You can choose between 9-speed settings (default) or 5-speed settings.

• Press and hold the ‘-’ key and ‘+’ key for at least 5 seconds. This selects the 5 speed-setting option. Press and hold the ‘-’ key and ‘+’ key again for at least 5 seconds to select the 9-speed setting option.

Switching on recirculation

• Simultaneously press and hold the timer key and the lighting key until the filter indicator flashes 3 times.
  The carbon filter indicator is activated.

Switching off recirculation

• Simultaneously press and hold the timer key and the lighting key until the filter indicator lights up.

Switching the lighting on and off

• Quickly press and release the lighting key. The light switches on at maximum strength.
• Press and hold the lighting key to set the lighting strength. The lighting changes from maximum to minimum strength and vice versa.
• To turn off the light, quickly press and release the lighting key while the light is on.

Changing the color temperature
Choose the temperature color of the light from warm to cold.

• Press and hold the lighting key. Press the ‘+’ key to make the light ‘colder’ or press the ‘-’ key to make the light ‘warmer’.

Switch on boost setting:

• Press and hold the ‘+’ key for approximately 2 seconds.
  The boost setting (setting ‘b’ or 7,8,9) is switched on for 10 minutes.
  The display will flash during this period. The original extraction setting will be reactivated after this period.

• Quickly press and release the ‘-’ key to switch off the boost setting.

Switching on the timer

• Press the timer key.
  The timer indicator will start to blink.
  The cooker hood will switch off automatically after 10 minutes.

• Switch off the timer function by pressing a random key (except the one for lighting).

Note!
If the boost setting has been selected you cannot activate the timer function.
Clean Air function
The Clean Air function allows you to freshen the air in your kitchen for a maximum of 24 hours at level 1.

• Switch off the cooker hood.
• Press and hold the timer key for approximately 3 seconds. The cooker hood will switch on automatically for 10 minutes every hour at the lowest speed setting. During extraction, the display will show a fast rotating ‘snake’. When the hood switches off after 10 minutes, the display will show a slow rotating ‘snake’ until the hood switches on again after 50 minutes
• Switch off the Clean Air function in the meantime by pressing a random key (except the one for lighting).

Active mode

• The proximity sensor detects a user standing in front of the hood and will illuminate the icons. After 3 seconds the lighting will automatically switch on.

Disable the active mode

• Simultaneously press the ‘+’ and ‘timer’ keys for 3 seconds. The active mode is disabled. The display shows a static ‘U’.

Enable the active

• Simultaneously press the ‘+’ and timer key for 3 seconds. The active mode is enabled. The display shows 3 times a blinking ‘U’.

Cleaning filters

Saturation grease and carbon filters
The filters should be replaced or cleaned when the grease filter indicator or the carbon filter indicator are lit. See chapter ‘Maintenance’.
Grease filter
The filter indicator will light up after 30 operating hours.

• The grease filters should then be cleaned.
• Reset the memory by pressing and holding the ‘-’ key until the filter indicator stops flashing.

Carbon filter
The filter indicator will flash after 120 operating hours.

• The carbon filter should then be cleaned or replaced.
• Reset the memory by simultaneously pressing and holding the ‘-’ and ‘+’ keys until the filter indicator stops flashing.

MAINTENANCE

Cleaning

Important!
For all maintenance first switch off the mains power to the cooker hood by pulling the plug out of the socket or by turning off the home’s master switch. The hood needs to be cleaned regularly, both inside as well as outside (at least in the same frequency as the grease filter cleaning). Do not use abrasive cleaning products. Do not use alcohol!
Important!
If the instructions regarding cleaning the appliance or replacing the filters are not followed, this can cause a fire. These instructions should be followed! The manufacturer is not liable for damage to the hood or fire damage resulting from incompetent maintenance or from non-adherence to the above safety instructions.
Cooker hood
Clean the cooker hood with soapy water and a soft cloth. Then wash off with clean water. Do not use aggressive cleaning agents such as caustic soda. The cooker hood finish stays in good condition if it is buffed periodically following the application of wax.
Stainless steel cooker hoods
Do not use scouring pads or other abrasive cleaners on stainless steel cooker hoods. Finish with a non-abrasive, non-polishing agent and buff the stainless steel in the direction of the grain.
Metal grease filters
Metal grease filters should be cleaned once a month (or when indicated by the filter cleaning indicator – if present on the model) using a neutral cleaning agent, either by hand or in the dishwasher on a short, low-temperature program. Place the grease filters with the openings facing downwards in the dishwasher so the water can drain out of the filter. Aluminum grease filters become dull as a result of dishwasher cleaning agents. This is normal and does not affect the working.
Removing cassette filter

1. Switch off the motor and lighting.
2. Push in the locking lugs at the front behind the glass plate and pull the glass plate carefully out of the seal. Tilt the glass plate downwards.
3. Open the filter’s access hatch.
4. Remove the filter from the hood.

Cleaning
The filters can be cleaned in the dishwasher. Allow the filters to drain well before replacing them.
The filters can also be cleaned by hand.
Clean the filters in soapy water by washing up the liquid and rinsing them. Allow the filters to drain well. See page 9 for instructions. The underside of the cooker hood can be cleaned with a mild cleaning agent and a damp cloth. Dry off with a paper towel.
Replacing cassette filter
The filter should be placed with the locking mechanism on the front. Open the filter access hatch. The notches at the front of the filter will then slot in. Hold the access hatch in this position when placing the filters.

1. Slot the notches at the back of the filter in the specially designed opening of the cooker hood.
2. Tilt the filter upwards.
3. Release the filter access hatch. The notches at the back of the filter will extend outwards and slot into the specially designed openings of the cooker hood. The filter is now in position again.
4. Press the glass plate firmly in the seal again (you will hear a click).

The glass plate can be removed for cleaning. Always remove the glass plate with 2 persons (due to its weight)!
Active carbon filters:
The regenerable active carbon filter must be washed by hand with clear water only, or in the dishwasher at a maximum temperature of 65 °C without dishwasher detergent (the washing should be done without any plates, dishes, cups, etc. in the machine). Do not use cleaning products!
Remove the excess water without damaging the filter, remove the holder and let the filter dry in the oven for at least 15 minutes at a maximum temperature of 100 °C.
To keep the regenerable carbon filter efficient, this action should be repeated every 2 months or when indicated by the filter indicator. The filter must be replaced after no more than 3 years, or if it has been damaged.
It is important that the grease filters and the regenerable active carbon filter are thoroughly dry before repositioning.
Replacing the carbon filter:
The grease filters should first be removed before replacing the carbon filter.

1. Open the filter access hatch.
2. Tilt the carbon filter downwards to remove it.
3. Repeat the steps above in reverse order, to replace the carbon filter.

Operation:

• Using a carbon filter creates more sound than when using the cooker hood with an outlet.
• The carbon filter’s operation is optimal at a lower motor speed. You should, therefore, avoid using the boost function.

Lighting

This hood is fitted with a light system. This light system has to be replaced by an authorized technician. Do not attempt to replace it by yourself.
The lamp in this household appliance is only suitable for illumination of this appliance. The lamp is not suitable for household room illumination.

TECHNICAL SPECIFICATIONS

Supply
Voltage, Frequency| 220-240 V, 50/60 Hz| 220-240 V, 50/60 Hz
Power| 177,6 W| 177,6 W
Power motor| 170 W| 170 W
Power lights| 2 x LED 3,8 W| 2 x LED 3,8 W
Level 1
Air flow, Noise, Pressure| 240 m³/h, 44 dB(A), 69 Pa| 246 m³/h, 44 dB(A), 67 Pa
Level 2
Air flow, Noise, Pressure| 315 m³/h, 50 dB(A), 124 Pa| 331 m³/h, 50 dB(A), 125 Pa
Level 3
Air flow, Noise, Pressure| 347 m³/h, 51 dB(A), 155 Pa| 366 m³/h, 52 dB(A), 157 Pa
Level 4
Air flow, Noise, Pressure| 375 m³/h, 52 dB(A), 180 Pa| 395 m³/h, 53 dB(A), 173 Pa
Level 5
Air flow, Noise, Pressure| 398 m³/h, 54 dB(A), 206 Pa| 418 m³/h, 55 dB(A), 197 Pa
Level 6
Air flow, Noise, Pressure| 457 m³/h, 57 dB(A), 272 Pa| 475 m³/h, 56 dB(A), 261 Pa
Level 7
Air flow, Noise, Pressure| 617 m³/h, 63 dB(A), 390 Pa| 642 m³/h, 63 dB(A), 391 Pa
Level 8
Air flow, Noise, Pressure| 713 m³/h, 66 dB(A), 389 Pa| 694 m³/h, 66 dB(A), 390 Pa
Level 9
Air flow, Noise, Pressure| 786 m³/h, 69 dB(A), 391 Pa| 818 m³/h, 69 dB(A), 389 Pa
Hood type| ES1074MN| ES1274MN
---|---|---
Type / Approval| | Island| Island
Control type| Touch control| Touch control
Width| 100 cm| 120 cm
Supply
Voltage, Frequency| 220-240 V, 50/60 Hz| 220-240 V, 50/60 Hz
Power| 179 W| 179 W
Power motor| 170 W| 170 W
Power lights| 2 x LED 4,5 W| 2 x LED 4,5 W
Level 1
Air flow, Noise, Pressure| 271 m³/h, 44 dB(A), 74 Pa| 272 m³/h, 45 dB(A), 70 Pa
Level 2
Air flow, Noise, Pressure| 357 m³/h, 49 dB(A), 134 Pa| 355 m³/h, 49 dB(A), 127 Pa
Level 3
Air flow, Noise, Pressure| 386 m³/h, 51 dB(A), 162 Pa| 383 m³/h, 54 dB(A), 151 Pa
Level 4
Air flow, Noise, Pressure| 414 m³/h, 52 dB(A), 187 Pa| 419 m³/h, 52 dB(A), 184 Pa
Level 5
Air flow, Noise, Pressure| 440 m³/h, 53 dB(A), 209 Pa| 443 m³/h, 54 dB(A), 206 Pa
Level 6
Air flow, Noise, Pressure| 501 m³/h, 56 dB(A), 277 Pa| 496 m³/h, 57 dB(A), 266 Pa
Level 7
Air flow, Noise, Pressure| 667 m³/h, 64 dB(A), 374 Pa| 674 m³/h, 65 dB(A), 386 Pa
Level 8
Air flow, Noise, Pressure| 721 m³/h, 64 dB(A), 364 Pa| 728 m³/h, 66 dB(A), 388 Pa
Level 9
Air flow, Noise, Pressure| 855 m³/h, 68 dB(A), 360 Pa| 865 m³/h, 69 dB(A), 382 Pa
Hood type| WS90274MC| WS12274MC
---|---|---
Type / Approval| Wall /| Wall /
Control type| Touch control| Touch control
Width| 90 cm| 120 cm
Supply
Voltage, Frequency| 220-240 V, 50/60 Hz| 220-240 V, 50/60 Hz
Power| 177,6 W| 177,6 W
Power motor| 170 W| 170 W
Power lights| 2 x LED 3,8 W| 2 x LED 3,8 W
Level 1
Air flow, Noise, Pressure| 240 m³/h, 44 dB(A), 69 Pa| 246 m³/h, 44 dB(A), 67 Pa
Level 2
Air flow, Noise, Pressure| 315 m³/h, 50 dB(A), 124 Pa| 331 m³/h, 50 dB(A), 125 Pa
Level 3
Air flow, Noise, Pressure| 347 m³/h, 51 dB(A), 155 Pa| 366 m³/h, 52 dB(A), 157 Pa
Level 4
Air flow, Noise, Pressure| 375 m³/h, 52 dB(A), 180 Pa| 395 m³/h, 53 dB(A), 173 Pa
Level 5
Air flow, Noise, Pressure| 398 m³/h, 54 dB(A), 206 Pa| 418 m³/h, 55 dB(A), 197 Pa
Level 6
Air flow, Noise, Pressure| 457 m³/h, 57 dB(A), 272 Pa| 475 m³/h, 56 dB(A), 261 Pa
Level 7
Air flow, Noise, Pressure| 617 m³/h, 63 dB(A), 390 Pa| 642 m³/h, 63 dB(A), 391 Pa
Level 8
Air flow, Noise, Pressure| 713 m³/h, 66 dB(A), 389 Pa| 694 m³/h, 66 dB(A), 390 Pa
Level 9
Air flow, Noise, Pressure| 786 m³/h, 69 dB(A), 391 Pa| 818 m³/h, 69 dB(A), 389 Pa
Hood type| ES10274MC| ES12274MC
---|---|---
Type / Approval| | Island /| Island /
Control type| Touch control| Touch control
Width| 100 cm| 120 cm
Supply
Voltage, Frequency| 220-240 V, 50/60 Hz| 220-240 V, 50/60 Hz
Power| 179 W| 179 W
Power motor| 170 W| 170 W
Power lights| 2 x LED 4,5 W| 2 x LED 4,5 W
Level 1
Air flow, Noise, Pressure| 271 m³/h, 44 dB(A), 74 Pa| 272 m³/h, 45 dB(A), 70 Pa
Level 2
Air flow, Noise, Pressure| 357 m³/h, 49 dB(A), 134 Pa| 355 m³/h, 49 dB(A), 127 Pa
Level 3
Air flow, Noise, Pressure| 386 m³/h, 51 dB(A), 162 Pa| 383 m³/h, 54 dB(A), 151 Pa
Level 4
Air flow, Noise, Pressure| 414 m³/h, 52 dB(A), 187 Pa| 419 m³/h, 52 dB(A), 184 Pa
Level 5
Air flow, Noise, Pressure| 440 m³/h, 53 dB(A), 209 Pa| 443 m³/h, 54 dB(A), 206 Pa
Level 6
Air flow, Noise, Pressure| 501 m³/h, 56 dB(A), 277 Pa| 496 m³/h, 57 dB(A), 266 Pa
Level 7
Air flow, Noise, Pressure| 667 m³/h, 64 dB(A), 374 Pa| 674 m³/h, 65 dB(A), 386 Pa
Level 8
Air flow, Noise, Pressure| 721 m³/h, 64 dB(A), 364 Pa| 728 m³/h, 66 dB(A), 388 Pa
Level 9
Air flow, Noise, Pressure| 855 m³/h, 68 dB(A), 360 Pa| 865 m³/h, 69 dB(A), 382 Pa

APPENDIX

Disposal of the appliance and packaging

This product is made from sustainable materials. However, the appliance must be disposed of responsibly at the end of its useful life. The government can provide you with information about this.
The appliance packaging can be recycled. The following materials have been used:

• cardboard;
• polyethylene foil (PE);
• CFC-free polystyrene (hard PS foam).

Dispose of these materials responsibly in accordance with legal provisions.
The product has a pictogram of a crossed-out waste container. This indicates that household appliances must be disposed of separately. This means that the appliance may not be processed via the regular waste flow at the end of its useful life. You should take it to a special municipal waste depot or a sales outlet that offers to do this for you.
Collecting household equipment separately prevents harm to the environment and public health. The materials used in manufacturing this appliance can be recycled, which provides considerable savings in energy and raw materials.
Declaration of conformity
We hereby declare that our products comply with the relevant European directives, standards and regulations as well as all requirements referred to in the standards.

w ww.atag.nl
www.atag.be 681472 / VER 4 / 06-07-2021

References

• Premium keukenapparatuur | Nederlands Design | ATAG
• Premium keukenapparatuur | Nederlands Design | ATAG

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>