Chiheng B02 Bluetooth Remote Control User Manual
- June 17, 2024
- Chiheng
Table of Contents
Chiheng B02 Bluetooth Remote Control
Product Information
- Specifications
- Model: [Product Model]
- Frequency Range: [Frequency Range]
- Transmission Power: [Transmission Power]
- Operating Distance: [Operating Distance]
- Power Source: [Power Source]
- Dimensions: [Dimensions]
- Weight: [Weight]
Product Usage Instructions
- Installation
- Select a suitable location for the transmitter.
- Ensure there is a minimum distance of 5mm between the radiator and your body when installing the equipment.
- Avoid co-locating or operating the transmitter in conjunction with any other antenna or transmitter.
- Make sure the power source is compatible with the equipment’s requirements.
- Connect the necessary cables and ensure they are securely plugged in.
- Operation
- Turn on the power switch located on the transmitter.
- Adjust the frequency range as needed using the provided controls.
- Ensure proper transmission power is set for your specific requirements.
- An operating distance within the specified range should be maintained for optimal performance.
- Maintenance
- Regularly clean the equipment using a soft, dry cloth to remove dust and debris.
- Avoid using harsh chemicals or solvents that may damage the surface.
- Keep the equipment away from excessive moisture or extreme temperatures.
- If any issues or malfunctions occur, refer to the troubleshooting section of the user manual or contact customer support.
FAQs
- Q: Can I use this transmitter with other antennas or transmitters?
- A: No, this transmitter should not be co-located or operating in conjunction with any other antenna or transmitter.
- Q: What is the minimum distance I should maintain between my body and the radiator?
- A: The minimum distance required is 5mm to comply with RF radiation exposure limits.
- Q: How do I adjust the frequency range?
- A: Use the provided controls on the transmitter to adjust the frequency range as needed.
- Q: What should I do if the equipment malfunctions?
- A: Refer to the troubleshooting section in the user manual for assistance or contact our customer support for further help.
This product is based on Bluetooth 5.0/5.2. It can remotely control the camera photographing function of the mobile phone through the button of the Bluetooth self-timer, thus realizing remote control of the mobile phone photographing. This product also serves Android and Apple systems. You can take photos and record videos by connecting Bluetooth without switching.
Operation
- Press and hold the key to start the machine and the blue light flashes.
- Open the mobile phone “Settings”, find “Bluetooth”, and search for the Bluetooth device name: AB Shutter3.
- Turn on “Camera” and click the self-timer button to take pictures.
Product specification
- Bluetooth version: 5.0/5.2
- Bluetooth distance; 10m
- Battery model: CR 2032
- Service life: more than 3 months
FCC
FCC Warning
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used per the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 5mm between the radiator and your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>