Zhongshan Taozuo Electrical Technology LD-C04 Smart Fabric Lamp Instruction Manual

Zhongshan Taozuo Electrical Technology LD-C04 Smart Fabric Lamp

Notice

1. For your safety, please entrust professional installation and maintenance.
2. The ambient temperature for normal use is -30℃~ 50℃. If it exceeds this range, the product life will be adversely affected.
3.  Please check if there is any damage after unpacking. If so, please contact your online service for replacement. If there is a defect during transportation,do not use the damaged lamp to avoid electric shock.
4.  Please turn off the power before installation, and then perform wiring installation.
5.  Please connect the product according to the standard working voltage.

Features

1. RGB
   This RGB floor light has RGB(Red,Green, Blue),32 multicolor options, can create a wonderful atmosphere lighting.

2. MUSIC Reactive
   Music synchronized LED strip lights shows in real-time.

3. Remote APP Control
   Remotely control strip lights via APP.Let the light strip change within reach.

4. Voice Activated
   Works with Alexa and Google Assistant.Control strip lights by simple voice commands.

Packing List

Note: The shapes of the cloth cover and base accessories are for reference only, please refer to the actual product.

Installation Steps

Step 1：
Each section of the round pipe is connected in turn, as shown in the figure .
Step 2：
After wrapping the light strip around the circular tube into a serpentine shape, buckle both ends of the light strip to the circular tube, as shown in the figure.
Step 3：
From bottom to top, install parts one by one, as shown in the figure .
Step 4：
A round hole of the cloth cover is inserted into the thread of the round pipe .
Step 5：
Using the Internal tooth ring, screw in the rod B to clamp the bottom of the cloth cover, as shown in the figure.
Step 6：
Install the finished product in step A2 on the rod of A5, as shown in the figure.
Step 7：
Pull up the cloth cover until the cloth cover is topped on Rod E.
Step 8：
On the rod E, use Plastic head screw to lock the upper part of the cloth cover,as shown in the figure.
Step 9：
Connect the adapter power supply, then it can be powered on.

Controlling By Control Box

On/Off button:Short press to turn on/off the floor light, long press 5 seconds,the LED controller will start Wi-Fi config. Bright/speed ajustment:Short press to switch speed circularly, long press to switch bright circularly. Music/Mode/Scene adjustment:Short press to switch the scene circularly;double press to switch the mode between the static / pre-set / custom/music circularly;long press to enter in/exit out music mode .

Please Note :

1. This product is only suitable for 2.4G Hz network.
2. The remote control needs to be aimed at the sensor head.

Remote control precautions

1.  Do not expose this product directly to a humid environment.
2.  Do not expose this product to excessively high temperature environments.
3.  Please keep it out of reach of children.
4.  If there is a problem, please refer to the user manual and/or contact your online service.

Warning:

1.  This product is for indoor use only.
2.  The light source of the light cannot be replaced !

Remote control function

Setting the APP

Step 1:
Scan the QR Code or search”Smart Life”or”Tuya Smart”on App store or Google Play to download and install the APP foriOS/Android.
The mobile phone system version needs to be Android 5.0 and iOS 9.0 or above.
Step 2:
Run “Smart Life”or”Tuya Smart”app on your phone, then tap “sign up” to create an account with Email address (if you already had one, please log in),and verify your account with verification code which has sent to your email.
Step 3:
Log in your account and follow the App instructions to create a “Family” and later follow below instruc-tions to add devices to your “Family”.

Quick Mode Configuration(EZ mode)

1.  Before connecting,please make sure your smart phone is connecting with your home Wi-Fi(2.4GHz) successfully.
2.  To connect in EZ mode,the strip lights needs to be set to blinks rapidly.(You can learn the detailed instruction on “How to set light as rapidly flashing” section).
3.  Open APP and click”+”to add device.
4.  Follow the in-APP instructions to connect the strip lights to your Wi-Fi network,Please note the device only works at 2.4GHz Wi-Fi.
5.  Once connected,the APP will prompt the connection.Then click “Completed“.
6.  Now you can control the Strip lights through the APP.

AP (Access Point) Mode Configuration

1.  Before connecting,please make sure your smart phone is connecting with your home Wi-Fi(2.4GHz)successfully.
2.  To connect in AP mode,the strip lights needs to be set to blinks slowly.(You can learn the detailed instruction on”How to set light as slowly flashing”section)

How to set light as rapidly flashing? (Ez Mode)

• Step 1 :Power on device.
• Step 2 :Hold the power button for 5S.
• Step 3 :Confirm LED Strip is now rapidly flashing.

How to set light as slowly flashing?(Ap Mode)

Step 1 :Power on device.
Step 2: Hold the power button for 5S.
Step 3 :Confirm LED Strip is now rapidly flashing.
Step 4 :Operate again:Hold the power button for 5S until light is slowly flashing.

How to connect floor light to Amazon Alexa / Google Assistant?

You can learn the detailed instruction on the “Me->More Services” page of the APP.Tap the corresponding service to learn more and how to set up.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statment

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>