Kinderkraft Moov 11 Best Strollers User Manual

: June 11, 2024
: Kinderkraft

Table of Contents

Moov 11 Best Strollers
Important – Read carefully and keep for future reference
Applies to Kinder Kraft car seat:
BUGGY FRAME ASSEMBLY
BASSINET ASSEMBLY
RESTRAINT SYSTEM.
CARE AND MAINTENANCE
CLEANING
Warranty
Documents / Resources

Mood 11 Best Strollers
Kinderkraft Moov 11 Best Strollers User Manualhttps://www.youtube.com/watch?v=A8nve- 8dhEs&list=PLR7FAXb1vT1b6opt43p4_rgttbxjB_q29&index=17

Moov 11 Best Strollers

Kinderkraft Moov 11 Best Strollers - fig

Dear Customers,
Thank you for purchasing a Kinderkraft product. Our products have been designed for your child’s safety and comfort.
The buggy is an ideal solution for those who value quality, modernity and functionality. Please read the manual carefully and follow its recommendations.

Important – Read carefully and keep for future reference

WARNING!

Never leave the child unattended.
Ensure that all the locking devices are engaged before use. To avoid injury ensure that the child is kept away when unfolding and folding this product.
Do not let the child play with this product.
Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use.
This product is not suitable for running or skating.
Age and weight usage: from 0 months up to 22 kg or 4 years whichever come first.
The product is designed to transport one child at a time.
The maximum basket load is 4 kg.
Any load attached to the handle and/or on the back of the backrest and/or on the sides of the vehicle will affect the stability of the vehicle.
Maximum weight of a bag attached to the adjustable handle is 2 kg.
Lift the front suspension when going up a curb or step.
The brakes should be locked when the child is placed in or taken out of the buggy.
Use only parts and accessories supplied or recommended by the manufacturer. Do not use other parts or accessories.
Do not place the product near open flame or other heat sources.
Do not use with an additional platform.

The following applies to the bassinet:
WARNING!

Use a harness as soon as the child can sit unaided.
Until then, the restraint system should be tucked under the enclosed mattress.
The bassinet is intended for children from birth to 15 kg.
The head of the child in the pram body should never be lower than the body of the child.
The bassinet must not be used as a child carrier. The bassinet handle is only designed for assembly and disassembly on the buggy frame.
Do not insert an extra mattress apart from that supplied with the product.

The following applies to the buggy:
WARNING!

This seat unit is not suitable for children under 6 months
Always use the restraint system
The product is intended for children from 6 months old to 22 kg or 4 years whichever come first.

Applies to Kinder Kraft car seat:

Kinder Kraft stroller is available also in a set with a compatible Kinder Kraft car seat.
The product is intended for children from birth to 13 kg.
If the seat is used together with the chassis, it does not replace a cot or bed. For sleep, place the child in a suitable pram body, cot or bed.
Use only parts and accessories supplied or recommended by the manufacturer.

A. Frame
B. Parent handle
C. Front wheels x2
D. Rear wheels x2
E. Safety bar
F. Seat/bassinet 2 in 1
G. Element of bassinet rack/seat
H. Mattress
I. Hood
J. Footmuff
K. Basket
L. Car seat adapters x2
M. Bag
N. Rain cover
O. Mosquito net

BUGGY FRAME ASSEMBLY

To initially unfold the frame, unlock the hook (FIG. 1) and then simultaneously pull the two free ends of the frame, until you hear the lock click (FIG. 2). Insert the rear wheel axles (D) in the corresponding slots until you hear the lock click (FIG. 3). Slide the front wheels (C) in the corresponding slots until you hear the lock click (FIG. 4). In the next step attach free ends of the basket (K) to the frame (FIG. 5). Insert the ends of the parent handle (B) in the free ends of the frame (FIG. 6). Make sure the latches are secured (FIG. 6A). An unfolded frame is shown in Figure 7.
WARNING! If the buggy has pumped wheels: Do not exceed the maximum permissible pressure in the wheels, the value is indicated on the wheel tires.
WARNING! Before using the buggy, make sure that all the wheels are properly installed.

BASSINET ASSEMBLY

The assembly of the bassinet should begin with inserting the loose part of the frame (G) into the slots in the bassinet (F) (FIG. 8). Make sure the latches are secured (FIG. 8A). Then fasten the zip fastener on the perimeter of the mounted part (FIG. 9). Adjust the rod under the bassinet with straps and secure with snaps (FIG. 10). A complete bassinet is shown in Figure 11. The bassinet can now be attached to the buggy frame (you will hear the sound of the locks on both sides of the buggy) (FIG. 12).
WARNING! THE BASSINET CAN ONLY BE MOUNTED FACING BACKWARDS (the child faces the person pushing the buggy).
NOTE! When the child starts to sit independently, attach an additional harness to the attachment points shown in the picture (Fig. 41).

IV ASSEMBLY OF SAFETY BAR, HOOD, FOOTMUFF The safety bar (E) can be used in both the bassinet and the pushchair function. Insert the tips of the safety bar in the corresponding slots until you hear the locks on both sides (FIG. 13).
Start the installation of the hood (I) from inserting plastic clips in the fastenings in the bassinet/seat frame (FIG. 14).
Proper protection is indicated by a quiet click. Lastly, secure the hood with Velcro’s (FIG. 15) and wrap around the tilt angle adjustment lever (Fig. 16).
Start the installation of the footmuff (J) from pulling it as shown in Figure 17. Wrap the ribbons on both sides of the safety bar and secure with snaps (FIG. 18). Wrap the free end of the footmuff around the safety bar and secure with buttons (FIG. 19). Additionally, attach both ends of the footmuff to the shell (FIG. 20).
V CONVERTING THE BASSINET INTO THE SEAT To convert the bassinet into the seat, you must first pull out the belts on both sides of the shell (FIG. 21) and under the footrest. Connect the ends of the belts behind the back, under the seat and the footrest (example Figure 22). Properly fastened belts should look as shown in Figure 23 (seat angle control method described in section VIII).
VI MOUNTING THE BAG, MOSQUITO NET AND RAIN COVER The MOOV stroller set includes: bag (M), rain cover (N) and mosquito net (O). Use the silicone hangers to hang the bag on the parent handle (FIG. 24). Place the mosquito net and secure with Velcro. Place the rain cover on the buggy and secure with Velcro’s around the frame (FIG. 25).
VII MOUNTING THE BABY CAR SEAT The supplied adapters (L) are compatible with the following car seats: Kinder Kraft, Maxi Cosi®, Cybex® and are suitable for models such as: Kinder Kraft MINK, Cybex Aton, Aton 2, Aton Q i Maxi Cosi Miko, Mica AP, Miko NXT, Miko Max 30, Citi, Cabrito, and Carciofi.
Slide the adapters into the slots in the frame until you hear the sound of the lock (FIG. 26). The adapters should be slightly tilted to the parent. Put the seat in the adapters and make sure it is properly secured. XMOOV buggy with MINK car seat are shown in Figure 27. To remove the adapters of the buggy frame, press the lock button in each of the adapters (FIG. 28).

WARNING! The seat must be always placed on the frame back to the direction of travel (the child should face the person pushing the buggy).
VIII USE OF BRAKE The buggy is equipped with a foot brake located on the rear axle. Press the brake pedal down to activate it. The brake is released after the pedal is lifted up (FIG. 29).
IX BUGGY DISASSEMBLY After removing the bassinet/seat or child safety seat (FIG. 28 & 39), press the frame collapse lock, and then pull the levers at both sides and finish with pushing down the parent handle (FIG. 30). A correctly folded frame must be secured with the side lock (FIG. 31). If necessary, the front and rear wheels can be removed from the frame by pressing the buttons marked in Figures 32 and 33.
X BUGGY ADJUSTMENT Front wheels in the MOOV buggy can be blocked in the forward movement position. Enable this mode by lowering the lock sliders (FIG. 34). To unlock the front wheels, pull the sliders up.
The hood can be enlarged by opening the zip fastener on the outer side of the cover (FIG. 35).
To adjust the parent handle, press the lock buttons on both sides of the buggy and adjust the handle to a comfortable height (FIG. 36).
The safety bar can be detached from the frame partially or completely by pressing a button on the side/sides (FIG. 37) The seat tilt angle can be adjusted using the lever at the top (FIG. 38). The seat has three positions: lying, reclining and sitting.
WARNING! When the seat is in the reclining position, do not unfasten the straps at the back of the backrest, as this may cause the child’s head to be positioned lower than the rest of their body.
The seat is adjustable so that the child can face the parent or the direction of travel. To do this, press the buttons on both sides of the seat, change the direction and attach the seat until it clicks (FIG. 39).

RESTRAINT SYSTEM.

To secure the child, connect the fasteners of hip and shoulder belts and then insert them into the middle clamp (FIG. 40) until it engages. Adjust restraint system each time you fasten, to properly secure the child.
The belts are unfastened in the reverse order.
The mattress (H) supplied should be always placed in the bassinet/seat. For the smallest children who are not yet able to sit unaided, the restraint system in the bassinet should be threaded through the slots in the mattress and hidden under it. The seat/carrycot has attachment points for an additional harness.

CARE AND MAINTENANCE

The buyer is responsible for proper installation of all functional elements as well as for carrying out all required maintenance and adjustments in order to keep the buggy in good technical condition.
The buggy must be periodically checked for potential problems. Significant measures to be applied to ensure the child’s safety and prevent shortening of the product life have been presented below:

Check the strength and safety of all rivets and connections.
Check all wheel locking equipment and tyros. If necessary, replace or repair.
Check if all safety devices work properly, particularly the main and additional fasteners that should move freely at any time.

Please, stop using the buggy if there are doubts as to its proper use or a suspicion of any danger.
If the wheels squeak, apply a thin layer of silicone. Do not use oil or grease based products as they attract dirt, which makes buggy movement difficult.

CLEANING

If the elements of the buggy chassis have been exposed to saltwater, rinse with tap water as soon as possible.

| Do not wash. Clean the product gently with a damp cloth and a mild detergent
---|---
| Do not bleach
| Do not iron
| Hand wash
| Wash at max. 30°C, gentle process
| Do not dry in a tumble dryer
| Do not dry clean

Hood, basket: Do not wash. Clean the product gently with a damp cloth and a mild detergent. Do not bleach. Do not dry in a tumble dryer. Do not iron. Do not dry clean Seat / bassinet cover, mattress: Hand wash. Do not bleach. Do not dry in a tumble dryer. Do not iron. Do not dry clean Footmuff, bag: Wash at max. 30°C, gentle process. Do not bleach. Do not dry in a tumble dryer. Do not iron. Do not dry clean.
Do not fold or store the product when it is wet and never store it in wet conditions, as it can lead to mold growth.

Warranty

All Kinder Kraft products are covered by a 24-month warranty. The warranty period starts from the date the product is handed over to the Buyer.
The warranty is only valid in the member states of the European Union, excluding overseas territories (as currently defined, including in particular: Azores, Madeira, Canary Islands, French Overseas Departments, Oland Islands, Athos, Ceuta, Melilla, Helgoland, Basinger am Hoch Rhein, Campion distalia and Living) and the territory of the United Kingdom of Great Britain and Northern Ireland excluding the British Overseas Territories (e.g. Bermuda, Cayman Islands, Falkland Islands).
The manufacturer’s warranty does not apply to countries not listed above. The conditions of the additional warranty may be determined by the Seller.
In some countries, it is possible to extend the warranty to a limited period of 120 months (10 years).The complete terms and conditions and the warranty extension registration form are available at WWW.KINDERKRAFT.COM
The warranty is valid only in the territory indicated in paragraph 2.
Claims must be made by completing the form available at WWW.RMA.KINDERKRAFT.COM
The warranty does not cover:
A. Cosmetic damage, including but not limited to: scratches, dents and cracks in plastic, unless the failure is due to a material or manufacturing defect;
B. Damage resulting from misuse or poor maintenance – including but not limited to: mechanical damage to products caused by misuse or poor maintenance;
○ Refer to the instructions for use and installation of the product contained in the user manual;
C. Damage caused by improper assembly, installation or disassembly of products and/or accessories;
○ Refer to the instructions for use and installation of the product contained in the user manual;
D. Damage caused by corrosion, mold or rust, resulting from improper maintenance, care and storage;
E. Damage caused by normal wear and tear or otherwise resulting from the normal passage of time;
○ This includes: tears or punctures in inner tubes; tire damage; tire tread damage; fading of fabrics resulting from mechanical use (e.g. on joints and covering of moving parts);
F. Damage or erosion caused by sun, perspiration, detergents, storage conditions or frequent washing, etc;
G. Damage caused by accident, abuse, misuse, fire, contact with liquid, earthquake or other external causes;
H. Products that have been modified to change functionality without 4Kraft’s written consent;
I. Products from which the serial number or lot number has been removed or tampered with in any way;
J. Damage caused by the use of third party components or products – including but not limited to: cup holders, umbrellas, reflectors, bells;
K. Damage caused by transport or by ground handling service providers.
The warranty period for accessories included with the product is 6 months from the date of sale, excluding the faults described above.
These warranty conditions are complementary to the Customer’s statutory rights with respect to 4KRAFT sp. z oxo. The warranty does not exclude, limit or suspend the Customer’s rights under warranty for defects in goods sold.
The full text of the Terms and Conditions of the Warranty is available on the website WWW.KINDERKRAFT.COM

All rights to the present document belong entirely to 4Kraft Sp. zoom. Any unauthorized use of them against their purpose, including in particular: using, copying, reproducing, making available – in whole or in part, without the consent of 4Kraft Sp. zoom. may result in legal consequences.
In the interests of our Clients – we are at your disposal! If you have a problem with the product you received, contact us in the most convenient way for you!

International: support@kinderkraft.com
(0048) 61646 02 37