Turntables E-EB01 Suitcase Turntable Record Player

CAUTION:
To reduce the risk of fire or electric shock. do not expose this appliance to rain
or moisture.

WARNING:
To prevent electric shock. do not use this (polarized} plug with an extension cord receptacle or another outlet unless the blades can be fully inserted to prevent blade exposure.

Important safety instruction

1.  Read these instructions -All the safety and operating instructions should be read before this product is operated.

2. Keep these instructions- The safety and operating instructions should be retained for future reference.

3. Heed all warnings -All warnings on the appliance and in the operating instructions should be adhered to.

4.  Follow all instructions -All operating and use instructions should be followed.

5.  Do not use this apparatus near water -The appliance should not be used near water or moisture -for example. in a wet basement or near a swimming pool, and the like.

6.  Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.  Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.  Protect the power cord from being walked on or pinched particularly al the plugs, convenience receptacles, and at the point where they exit from the apparatus.

10.  Only use attachments/accessories specified by the manufacturer.

11. 1id Use only with the cart. stand. tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart or rack is used, use caution When moving the cart/apparatus combination to avoid injury from tip-over.

12.  Unplug the apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen Into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

    • This lightning flash with arrowhead symbol within an equilateral triangle is intended to “‘ aler1 the user to the presence of non. insulated ·dangerous voltage enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
    • Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no users.serviceable parts inside. Refer servicing to qualified personnel.
    • The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

14.  The mains plug is used as a disconnect device, the disconnect.t device shall remain readily operable.

15. WARNING
    To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall not be placed on the apparatus.

16. The use of the equipment in a moderate climate.

17. The ventilation should not be impeded by covering the ventilation openings with items such as, newspapers, tablecloths, cur1ains, etc.

18. No naked name sources, such as lighted candles, should be placed on the apparatus.

19. The symbol …………. with Indication AC voltage.

20.   These servicing ins! ructK>ns are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating ins! ructK>ns unless you are qualified to do so.

21. WARNING: Please refer the information on the exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.

Before Use

1.  Choose unit installation local ion carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locatK>ns subject to vibrations and excessive dust, cold or moisture. Keep away from sources that hum, such as transformers or motors.
2.  Oo does not open the cabinet as this might result in damage to the circuitry or electrical shock, if a foreign object should get into the set, contact your dealer.
3. Be sure not to handle records with dirty fingers. Never play a record that has a crack on the surface.
4. When removing the polish plug from the wall ou11et, alY1ays pull directly on the plug, never pull the cord.
5. To protect the stylus, don’t forget to put on the white protective needle cover after use.
6.  Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth.
7.  In order to shut off the power to this product completely, unplug the power cord from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an extended period of time, such as a vacation.
8. Keep this manual in a safe place for future reference,

PRODUCT OVERVIEW

Inside view:

| ITEM| DESCRITPION

---|---|---
1| Sp indle| P lace a r eco rd o n to the spindle lo play
2| 45rpm adapter| Snap into a 45 RPM record so that it fits the spindle
3| Tone ann| Holds the stylus that producessound from the record
4| T o n e arm l ifte r| P us h forwa r d and backward to raise and lo werto n e arm
5| Powe r N o lume

knob

| Powe r o n I of f the turntab e l . A djus t the volume.
6| Bluetooth pairing button| Press Blueloolh button lo start Bluetooth pairing. It will pair to audio devices (Bluetooth speakers. headphones. rece i versetc .) . Lo ng p r ess B l uetoo th button ca n switch

betwee n Bluetooth standby and Bluelooth pairing mode

7| B l u e t o o th indica t r o| Bluetooth standby: blue light slowly flash

Bluetooth transmitter(pairing): blue light quickly flash Bluelooth paired: blue light always slay Iii

8| Mule button| Disconnect the sound from the turntable horn.
9| RPM selector

switch

| Turn 10 select the record type (33, 45 or 78).
10| To ne ann rest

holder

| P l ace th e to n e arm o n this holder **with it i s when n ot** in

use.

11| Stylus| Generates sound from a playi n g reco rd .

Rearview

| I T EM| DESCR I PT I ON

---|---|---
1| L i ne o u t

socket

| P l ug t h e i nc l uded    RCA audio cable in to these jacks. Matched

to red and white to white.

2| DC in socket| Plug the AC power cord into this jack and into a power outlet

Powering On the Turntable
Connect the supplied AC/DC power adapter to the “DC IN” socket (2) on the back of the unit and to your household outlet by plugging in each end respectively.

Note:
Check the rating plate on the AC/DC adapter with your mains power voltage before powering the turntable on.

Using Your Turntable

There are three ways to listen to music with this unit:

1.  Using the built-in internal speakers
2. Using the RCA output jack
3. Using Bluetooth Transmitting

Listening to music through the RCA jacks
You can connect the turntable to an external audio system (speakers or amplifier) through the LINE OUT socket using the included audio RCA cables

1.  Plug the red and white connectors on the included RCA cable into the UR Line-out socket on the back of your turntable. red to red and white to white.
2. Plug the other end of the cable into your speakers, red to right speaker and white to left speaker.
3. Power on the turntable by turning the knob (5) and the amplifier devioe you connected.
4. During playback, adjust the volume control on the amplifier device.

Note:
The output of this jack is a pre. amplified signal and is not suitable for connecting to the PHONO IN interface or the amplifier

Listening to music by Bluetooth Transmitting

1. Tum on your home Bluetooth amplifier or speaker {ex. speaker, headphones, etc.)
2. Turn U1e power/volume knob clockwise to turn on lhe unit and switch lhe device into Bluetooth transmitting standby mode. The PAIR LED light will begin to flash slowly indicating that U1e unit is searching for the Bluetooth device automatically,
3. When the device is successfully paired, U1e PAIR LED will be steady lit (no flashing).
4. To adjust the volume, either turn the volume knob on the unit or adjust the volume on your Bluetooth device.
5.  If you would like to connect a new Bluetooth amplifier device to the turntable, first press the Bluetooth Pair button (6) to disconnect the current Bluetooth amplifier device, next power off your current Bluetooth amplifier device and power on your new device. Repeat steps 1·-3 to connect the new device.

NOTE:

•  It is important to turn off your Bluetooth amplifier device when not in use as the turntable will automatically connect to the device in future use.
• Bluetooth transmission gives priority to connecting to external Bluetooth amplifiers with a strong signal

Play a record with internal speakers

1. Turn the power/volume knob clockwise to tum on the unit. Determine how you will listen to the record following the previous steps (built-in speakers. RCA Output. Bluetooth Device)

2. Place a record onto the turntable, center it on the spindle. If playing a 4SRM record (small EP), insert the dapter into the center of the record before placing it on the turntable spindle.

3.  Set the Speed Selector to 33, 45 or 78 rpm according to the record.

4. Remove the tone afm test lock to release the tonearm.. NOTE: It is important tote-tock the tonearm when not in use to prevent damage.

5. Remove the protective cap from the stylus. NOTE: It is important to keep this cap for storage when not in use to protect the stylus.

6.  Push the tonearm lifter toward the back of the unit to raise the tonearm.

7. Gently guide the tonearm to the left.. above the turntable and record, NOTE; The record will begin to spin.

8. Push the tonearm lifter forward, toward the front of the unit to lower the tonearm so that the stylus touches the record and it begins to play.
   NOTE: Do NOT manually force the tonearm up or down, this could cause serious damage. Always use the tonearm lifter to raise and lower the tonearm.

9. To pause or stop playing the record, push the tonearm lifter toward the back of the unit to raise the tonearm. Guide the tonearm to the right, out of the way of the record and turntable.

10. 1Adjust the volume of the internal speakers by turning the power/volume knob )accordingly. Additionally. you can mute the speakers at any time by pushing the Mute Button When you a,e finished listening and are ready to put away the turntable do the following:  Raise the tonearm by pushing the tonearm lifted toward the back of the unit.  Guide the tonearm to the right. away from the record and turntable, and place it back above the tone armrest.  Push the tonearm lifter toward the front of the unit to lower the tonearm lock the tonearm in place by latching the tonearm rest lock.. Replace the stylus. protective cover.

11. Turn the Power/Volume Knob ( counterclockwise until you hear a elide and the PAIR LEO is off to turn the unit off.

Notes:

• Be sure 10 property raise and lower the tonearm using the tonearm lifter when making any adjustments to the unit,
• Do not stop or turn the plotter manually.
•  We,1 not in use, it is recommended to remove the record and close the lid of the turntable to protect from dust and debris.
• Always relock the tonearm lock catch before transporting your turntable
•  Do not place anything on top of the turntable cover, especially while playing a record.

MAINTENANCE/ PROPER HANDLING

• Do not touch the record’s grooves. Only handle records by the edges or the label with clean hands. Touching the record surface will cause your record’s quality to deteriorate.
• To clean a record, use a soft anti-static cloth to gently wipe the record surface.
• Keep records in their protective sleeves when not in use.
• Always store records upright on their edges
• Avoid placing records in direct sunlight, close to a heat source (radiators, stoves, etc.}, or in a location subject to vibration, excessive dust, heat, cold or moisture.

General Care

•  When removing the power plug from the wall outlet, always pull directly on the plug. Never pull the cord.
•  Oo does not attempt to clean the unit with chemical solvents as this might damage the finish.
•  For cleaning, only use a clean, dry cloth.
• In order to shut off the power to this product completely, unplug the power cord from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an extended period of time. How to Replace the Turntable Stylus/Replacement Needle II 402M208·015 The stylus should lo5t about SO hours under normal use. However, it is recommended that the stylus be replaced as soon as you notice a change in sound quality. Prolonged use of a worn•out stylus may damage the record. The highest speed of 78 RPM records would wear out the stylus more quickly.

Removing the old stylus:

1. Set a flat head screwdriver at the tip of the stylus and push downward rat the tip of the stylus and push downward
2.  Remove the stylus by pulling it simultaneously downward and forward.

Installing a new stylus :

1. Hold the front tip of the stylus and insert its rear edge first.
2.  Push the stylus upwards until the tip locks into place.

Caution:

• Do not bend the stylus.
• Do not touch the needle to ovoid injury your hand.
• Turn off the unit’s power before you rep/au the stylus.
•  Keep out of reach of children.

Specifications

The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license. Other trademarks and trade names are those of their respective owner,

Troubleshooting guide

In case or trouble with the unit, please look through below and see ff you can solve the problem by yourself before calling your dealer

General

your turntable anda

w::>fking power outlet

I don’t hear sound fromthe

speakers.

| • Increase the volumeon the turntable.

• Make surethat thesound source matches your turntable’ s output

• If you areusing the RCA jades. makesure that the RCA <:able is,

connected correctly.

• Make sure the Mute Button is not pressed.

The sound is noisy.| •  Turn off applianoes (like a TV) near your turntable.

• Moveyour turnt&ble farther aYoGy from nearby applianoes.

My turntable is on, but doesn’ t

respond.

| • Remove the pov,e,oord anda11poy.er supply devices, wait one

minute, and then plug your turntable backinto thepower outfel

PHONO Player

The sound is noi$y         n

I use rrrt turntable for a period of

time.

| • Replace the stylus.
A record doesn’t fiton the

spindle.

| • To play 45 RPM records , use the 45 RPMadapte r

Bluetooth

Pt’essandholdthe(Bluetooth pairing) button for t’M>seconds to make sure that your tumtable 1s switchedto transmitting mode.

• Move your 81uetoothspeaker losef to your tumtable,

Bkletooth pairing failed.| •  Make surethat yourBluetooth speaker is notconnected toanother Skletoothdevice. If itis connected to another device. turn off the devic& o, deletethe Bluetooth oonnectionname fromyour spe:aket s list of devices.

•  Make suretNt your Sluetooth speaker uses BOB.certified reeeN’e.

•  The wo rst case scenario is to turnoff theturntableand Bluetoothdevicesand try again after 10 seconds

FCC Statement

This device complies with Part 15 or the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause:se undesired opera lion.

NOTE:
This equipment ha.s been tested and found to comply with the limits for a Class.s 8 digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to tadk> communications. However, there is no guarantee that interference will not occur in a particular installation. Ir this equipment does cause harmru1 interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to t.rv Lo correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radk>/TV technician for help

WARNING:
Ally changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment The device must not be co-loc ated or operating inconjunct.on with any other antenna or transmitter.To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>