SOUNDPEATS Wings2 Proof Earphones User Manual

June 16, 2024
SoundPEATS

SOUNDPEATS Wings2 Proof Earphones

SOUNDPEATS-Wings2-Proof-Earphones-PRODUCT

Specifications

  • Product: Soundpeats Wings2
  • Importer: Alza.cz a.s.
  • Address: Jankovcova 1522/53, Holesovice, 170 00 Praha 7, www.alza.cz

Initial Setup Guide

  1. Lift the lid of the charging case and remove the insulating film from the top of both earbuds.
  2. Place both earbuds back into the charging case.
  3. Open the cover of the charging case to remove the earbuds. The earbuds will power on automatically and enter into a pairing mode. The right earbud will alternate between white and red flashing lights, and the left earbud will have a steady white light when successfully paired.
  4. Activate Bluetooth on your device and select SOUNDPEATS Wings2 from the list of available Bluetooth devices to complete the pairing process.

Reset Instructions

  1. Delete the pairing record on your device.
  2. Return both earbuds to the charging case, ensuring they are in the charging mode.
  3. Hold down both buttons for 10 seconds until both LEDs flash red and white twice, indicating the reset is complete.

Wearing Instructions

  1. Distinguish between the left and right earphones.
  2. Customize the fit of the earphones to suit your ears.

Earphone Control

  • Power On: Automatic: Simply open the charging case, and your earphones will seamlessly power on without any additional steps. Manual: To manually power on the earphones, press and hold the multifunctional button for 1.5 seconds when the earphones are off.
  • Power Off: Automatic: Place the earphones back into the charging case and close the case lid, and they will automatically power off. Manual: When the earphones are on, you can manually power them off by pressing and holding the multifunctional button for 10 seconds.
  • Play/Pause: Easily control your audio playback by double-tapping the multifunctional button.
  • Volume Control: Decrease volume with a single tap on the left multifunctional button. Increase volume with a single tap on the right multifunctional button.
  • Track Navigation: Skip to the next track by pressing and holding the right multifunctional button for 1.5 seconds. Return to the previous track with a 1.5-second press and hold on the left multifunctional button.

Phone Call Management

  • Answer/Hang up: Double-tap the multifunctional button.
  • Reject Call: Press and hold the multifunctional button for 1.5 seconds.
  • Switch between calls: Press and hold the multifunctional button for 2 seconds.

For an enhanced gaming experience, activate the Game Mode by pressing the left multifunctional button three times.

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Initial Setup Guide

SOUNDPEATS-Wings2-Proof-Earphones-FIG- \(1\)

To retrieve the headphones, start by lifting the lid of the charging case and removing the insulating film from the top of both earbuds. Afterward, carefully place both earbuds back into the charging case.

  1. Begin by opening the cover of the charging case to remove the earbuds. Upon removal, the earbuds will power on automatically and enter into a pairing mode. You’ll know they are successfully paired when the right earbud alternates between white and red flashing lights, and the left earbud exhibits a steady white light.
  2. Activate Bluetooth on your device and select “SOUNDPEATS Wings2” from the list of available Bluetooth devices to complete the pairing process.

Reset Instructions

  1. Delete the pairing record on your device.
  2. Return both earbuds to the charging case, ensuring they are in the charging mode.
  3. Hold down both buttons for 10 seconds until both LEDs flash red and white twice, indicating the reset is complete.

Wearing Instructions

  1. Distinguish between the left and right earphones.
  2. Customize the fit of the earphones to suit your ears.”SOUNDPEATS-Wings2-Proof-Earphones-FIG- \(3\)

Earphone Control

SOUNDPEATS-Wings2-Proof-Earphones-FIG- \(4\)

Power On

  • Automatic : Simply open the charging case, and your earphones will seamlessly power on without any additional steps.
  • Manual : To manually power on the earphones, press and hold the multifunctional button for 1,5 seconds when the earphones are off.

Power Off

  • Automatic : Place the earphones back into the charging case and close the case lid, and they will automatically power off.
  • Manual : When the earphones are on, you can manually power them off by pressing and holding the multifunctional button for 10 seconds.

Play/Pause
Easily control your audio playback by double-tapping the multifunctional button.

Volume Control

  • Adjust the volume seamlessly:
  • Decrease volume with a single tap on the left multifunctional button.
  • Increase volume with a single tap on the right multifunctional button.

Track Navigation

  • Navigate through your playlist effortlessly:
  • Skip to the next track by pressing and holding the right multifunctional button for 1,5 seconds.
  • Return to the previous track with a 1.5-second press and hold on the left multifunctional button.

Phone Call Management

  • Manage your calls with ease:
  • Answer or hang up a phone call by double-tapping the multifunctional button.
  • To reject an incoming call, press and hold the multifunctional button for 1,5 seconds.
  • Switch between two active calls by pressing and holding the multifunctional button for 2 seconds.

Voice Assistant
Activate or deactivate your device’s voice assistant by simply pressing the right multifunctional button three times.

Game Mode
For an enhanced gaming experience, activate the Game Mode by pressing the left multifunctional button three times. These intuitive controls make using your earphones a breeze, providing you with a seamless and enjoyable audio experience.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

Declaration of Conformity

This product complies with the legal requirements of the following European Union directives: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and Directive 2011/65/EU amended (EU) 2015/863.

WEB
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

Frequently Asked Questions

What does the charging case indicator light show?

  1. Battery Status of the Charging Case When Earphones Are Stored:
    Sufficient Battery : The red light remains illuminated for 4 seconds and then turns off.
    Low Battery : The red light flashes for 4 seconds and then turns off.

  2. Charging Status of the Charging Case:
    Charging in Progress : The blue light flashes.
    Fully Charged : The blue light remains steadily on.

How to charge the charging case?

  1. To charge the charging case, connect it to a Type-C charger, ensuring that the current does not exceed 1A.
  2. It is recommended to periodically charge the earphones, at least every three months if they remain unused for an extended duration. This helps prevent battery damage.

Why do the earphones remain connected to the phone when placed back into the charging case with the lid closed?

  1. First, check whether the charging case has any remaining battery power. If the charging case has depleted its battery, closing it will not disconnect the earphones from the connected device.
  2. Ensure that the earphones are correctly positioned within the charging case, and make sure that the charging metal sheet and PIN are clean. If there are any dirt or residue on the contact points of both the earphones and the charging case, cleaning them should resolve this issue effectively.

How do I reset the earphones?

To reset the earphones, delete the pairing record on your device, return both earbuds to the charging case in charging mode, and hold down both buttons for 10 seconds until both LEDs flash red and white twice.

How do I power on the earphones?

To power on the earphones, either open the charging case or manually press and hold the multifunctional button for 1.5 seconds when the earphones are off.

How do I control the volume?

To decrease volume, tap the left multifunctional button. To increase volume, tap the right multifunctional button.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals