luceco DSPx-01.RO.03.2023 Decorative Surface Spotlight Instruction Manual

luceco DSPx-01.RO.03.2023 Decorative Surface Spotlight

Product Information

• Specifications
  • Product Name: Foco de Superficie Decorativo
  • Lamp Type: GU10 (lamp not included)
  • Warranty: 3 years (standard)
• Safety Recommendations
  • When using luminaires with an integrated LED light source, it is important to note the following safety recommendations:
  • Do not attempt to replace the light source on your own.
  • The light source should be replaced by the manufacturer only.
• Contact Information
  • If you need technical assistance or have any questions regarding the product, please contact our Tech Help Line:
  • UK: 0330 0249 279
  • Non-UK: +44 (0)1952 238 100
• The product is supplied by LUCECO, located at:
  • Stafford Park 1, Telford, Shropshire, England, TF3 3BD
  • You can also visit our website for more information:
  • UK Website.
  • EU Website.

Product Usage Instructions

• Installation
  • To install the Foco de Superficie Decorativo, please follow these steps:
  • Choose a suitable location for the luminaire.
  • Ensure the surface where the luminaire will be installed is clean and dry.
  • Remove any protective packaging or covers from the luminaire.
  • Connect the necessary wiring according to your electrical system and local regulations.
  • Mount the luminaire securely to the surface using the provided screws or mounting brackets.
• Operating
  • To operate the Foco de Superficie Decorativo, please follow these instructions:
  • Ensure the power supply to the luminaire is switched off.
  • Insert a compatible GU10 lamp into the luminaire socket.
  • Turn on the power supply and use the appropriate switch or control mechanism to activate the luminaire.
• Maintenance
  • To ensure optimal performance and longevity of the Foco de Superficie Decorativo, please follow these maintenance guidelines:
  • Regularly clean the luminaire with a soft, dry cloth to remove dust and debris.
  • Avoid using abrasive cleaners or solvents that may damage the surface of the luminaire.
  • Check the condition of the lamp periodically and replace it if necessary.
• Disposal
  • When disposing of the Foco de Superficie Decorativo, please adhere to your local regulations for electronic waste disposal.
  • Do not dispose of the luminaire in regular household waste.
• FAQ (Frequently Asked Questions)
  • Q: Can I replace the light source myself?
  • A: No, for luminaires with an integrated LED light source, the light source should be replaced by the manufacturer only.
  • Q: What type of lamp does the Foco de Superficie Decorativo use?
  • A: The Foco de Superficie Decorativo uses GU10 lamps. Please note that the lamp is not included with the luminaire.
  • Q: How long is the warranty period for this product?
  • A: The Foco de Superficie Decorativo comes with a standard warranty of 3 years.

SAFETY RECOMMENDATIONS

FOR ASSEMBLY AND USE OF LIGHTING FITTINGS

• The producer (supplier) is not liable for damages and injuries caused by incorrect assembly and starting up.
• The installation and connection of the fitting may only be done by a person with a licence for work on electrical equipment.
• During the installation, comply with the effective regulations and standards.
• Before the installation, check whether the place intended for the installation of the fitting (the wall, the ceiling) is free from any earlier electric, gas or waterline installation.
• Note! Before starting assembly works, switch off the voltage in the supply line – remove (switch off) the fuse.
• The fittings are only intended for use in residential units. Do not install fittings on the base that are humid or of good conductivity.
• The fitting wires should be connected with a connector compliant with the EN 60998 standard.
• The connector (the block) should have safety attestations effective in Poland and the European Union.
• The Class I fitting should be connected to the earthing terminal with the earth conductor (green/yellow).
• Class I fitting has double wire insulation and may not be connected to the earth conductor.
• Make sure that the wires were not damaged during the installation work.
• Damaged fittings should only be replaced with fittings of the same design, power rating and voltage.
• Blown bulbs should be replaced only with bulbs of the same type, voltage and power rating (see the label).
• Halogen sources of light must not be used in the fittings with E27 and E14 threads offered by us.
• The bulb’s glass may reach very high temperatures, so it should be left to cool down before replacement.
• The bulbs provided with the fitting are not subject to complaints because they are added as decorative and advertising items.
• Clean only the enclosure of the fitting. Do not allow water or moisture penetrate to the contacts or the parts running electricity.
• If the fittings are installed in the room with a bathtub or a shower, follow the regulations applicable to construction electrical installations.
• The fittings are provided with non-replaceable Z-type wires. Unauthorised replacement of the wire (the external one, flexible, or the internal one) is forbidden.
• It always causes irreversible changes in the functional premises, thus it may cause defective operational use and hazard for users.
• If any wire is damaged, the fitting should be withdrawn from use and destroyed.
• Cleaning may only be done with a dry cloth when the power supply is disconnected.
• Class I protection (with insulation) – the earth conductor (the green/yellow wire) may not be connected.
• Class I protection – the lighting fitting must be connected with the earth conductor (the green/yellow wire) to the earth wire end.
• Do not touch
• Burning hazard
• The fittings are intended for indoor installation with an ambient temperature of about ta
• Replace the broken glass protection enclosure

The materials used in the production of lighting fittings are of natural origin, thus attention should be paid to the following features specific for the material:

• In the case of blown glass, air bubbles may originate, which is a sign of a high-grade product manufacturing process.
• Wooden ornaments may occasionally feature other shades or small dots.
• Wood is a natural material of unchanging properties, so deviations of this type may always appear, but they are not grounds for complaints, rather, they render the quality of naturalness to wood material in all its forms.
• Elements of fittings of brushed or transparently enamelled steel or iron may feature the top coat with inclusions, discoloured- tion, soldering spots, welding traces or scratches, which are characteristic of non-machined steel, so they do not impair its value.

Information on the protection

Information on the protection of the environmen:

• Worn-out electrical appliances are recyclable materials that must not be disposed of in household waste containers (see the marking in the text), as they may contain substances hazardous to human health, life, and the environment.
• According to the WEEE directive (Directive 2012/19/EU) applicable in the European Union, separate disposal methods should be used for used electrical and electronic equipment.
• The user who intends to dispose of such products is obliged to deliver it to a collection point for used equipment, eg a seller of that equipment, or another entity that collects waste of this type.
• The above obligations result from the Act of 11 September 2015 on waste electrical and electronic equipment (Dz.U. nr 0, poz. 1688) and are aimed at ensuring the appropriate level of collection, recovery, and recycling of used equipment, thus contributing to the environmental protection.
• The producer (supplier) is not liable for injuries and damages that may result from improper use of the fitting.
• NOTE – this applies to luminaires with an integrated LED light source. Do not replace the light source on your own. The light source should be replaced by the manufacturer only.

Installation & Operating Instructions

• L
  Phase conductor (line) black

• L1
  Phase conductor (line) brown

• N
  Neutral conductor blue

• PE
  Protective conductor (yellow/green)

DECORATIVE SURFACE PIPE

CONTACT

• Tech Help Line
• UK – 0330 0249 279
• Non UK – +44 (0)1952 238 100
• Supplied by LUCECO
• Stafford Park 1, Telford, Shropshire,
• England, TF3 3BD
• Visit our website at www.luceco.com.
• DSPx-01.RO.03.2023

References

• Luceco | LED Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>