PETZL SPIN L1 Very High Efficiency Single Pulley User Manual
- June 16, 2024
- PETZL
Table of Contents
3 year guarantee
SPIN L1 Very High
Efficiency Single Pulley
User Manual
PETZL SPIN L1 Very High Efficiency Single Pulley
WARNING
Activities involving the use of this equipment are inherently dangerous.
You are responsible for your own actions and decisions.
Before using this equipment, you must:
- Read and understand all Instructions for Use.
- Get specific training in its proper use.
- Become acquainted with its capabilities and limitations.
- Understand and accept the risks involved.
FAILURE TO HEED ANY OF THESE WARNINGS MAY RESULT IN SEVERE INJURY OR DEATH.
PETZL
FR-38920 Croles
Cidex 105A
PETZL.COM
ISO 9001©Petzl
Sustaining our Community
FONDATION-PETZL.ORG
-
Field of application (text part)
-
Nomenclature
-
Inspection, points to verify (text part)
-
Compatibility (text part)
-
Installing the pulley
-
Performance
Breaking load -
Additional information
NFPA CERTIFICATION FOR
SPIN L1 AND SPIN L2
MEETS THE PULLEY REQUIREMENTS OF NFPA 1983, INCORPORATED IN THE 2022 EDITION OF NFPA 2500. EMERGENCY SERVICES PULLEY NFPA 2500 (1983) – 2022.
PULLEY: MBS 36 kN G (GENERAL USE) NFPA 2500 (1983) – 2022
After removing the Instructions for Use from the equipment, make a copy of it and keep the original as part of a permanent record that includes the usage and inspection history for the equipment. Keep the copy of the Instructions for Use with the equipment and refer to it before and after each use. Additional information regarding auxiliary equipment can be found in NFPA 15 and NFPA 1858 and NFPA 1983, incorporated in the 2022 edition of NFPA 2500.
Traceability and markings
China standards
When operating under the XF 494-2004 standard for firefighters, use onlya
9,5-13mm diameter Light or General Use kernmantle Life Safety Rope.
This product is compliant with the Regulation 2016/425 on Personal Protective
Equipment as brought into UK law and amended.
Authorized Representative in UK : PETZL UK Agency, Unit 3-7, Tebay Business
Park, Old Tebay, Penrith, CA10 3SS, United Kingdom
Approved body performing the UKCA type examination and the production control
of this PPE :
SGS United Kingdom Ltd
Inward Way
Rossmore Business Park
Ellesmere Port, Cheshire, CH65 3EN
United Kingdom
N° 0120
These instructions explain how to correctly use your equipment. Only certain
techniques and uses are described.
The warning symbols inform you of some potential dangers related to the use of
your equipment, but it is impossible to describe them all. Check Petzl.com for
updates and additional information.
You are responsible for heeding each warning and using your equipment
correctly.
Any misuse of this equipment will create additional dangers. Contact Petzl if
you have any doubts or difficulty understanding these instructions.
Field of application
Personal protective equipment (PPE) used for fall protection from height.
Pulley that can be opened while attached to the anchor.
This product must not be pushed beyond its limits, nor be used for any purpose
other than that for which it is designed.
Responsibility
WARNING
Activities involving the use of this equipment are inherently dangerous.
You are responsible for your own actions, decisions and safety.
Before using this equipment, you must:
- Read and understand all Instructions for Use.
- Get specific training in its proper use.
- Become acquainted with its capabilities and limitations.
- Understand and accept the risks involved.
Failure to heed any of these warnings may result in severe injury or
death.
This product must only be used by competent and responsible persons, or those
placed under the direct and visual control of a competent and responsible
person.
You are responsible for your actions, your decisions and your safety and you
assume the consequences of same. If you are not able, or not in a position to
assume this responsibility, or if you do not fully understand the Instructions
for Use, do not use this equipment.
Nomenclature
(1) Swivel, (2) Frame, (3) Sheave, (4) Axle, (5) Moving side plate, (6)
Unlocking button, (7) Cover, (8) Rivet, (9) Rivet channel, (10) Main
attachment hole, (11) Auxiliary attachment hole (SPIN L2 only).
Principal materials: aluminum, stainless steel, nylon.
Inspection, points to verify
Your safety depends upon the integrity of your equipment.
Petzl recommends a detailed inspection by a competent person at least once
every 12 months. WARNING: your intensity of use may cause you to inspect your
PPE more frequently. Follow the procedures described at Petzl.com. Record the
results on your PPE inspection form: type, model, manufacturer contact info,
serial number or individual number, dates: manufacture, purchase, first use,
next periodic inspection; problems, comments, inspector’s name and signature.
Before each use
On the product, verify the absence of any cracks, deformation, marks, wear,
corrosion…
Check the condition of the sheave and verify that it is working properly.
Check the condition of the locking system for the moving side plate and verify
that it is working properly.
During use
It is important to regularly monitor the condition of the product and its
connections to the other equipment in the system. Make sure that all items of
equipment are correctly positioned with respect to each other.
Compatibility
Verify that this product is compatible with the other elements of the system
in your application (compatible = good functional interaction).
Equipment used with your pulley must meet current standards in your country
(e.g. EN 1891 rope).
The attachment hole is compatible with carabiners, slings or ropes.
WARNING: prolonged use with a connector can create wear and sharp edges that
are dangerous if the attachment hole is then used with a rope or a sling.
Pulley setup
Beware of any external object rubbing against the unlocking button.
WARNING: if the red indicator on the unlocking button is visible, the pulley’s
side plate is not locked: there is a risk of accidental opening.
The pulley must be able to move freely so that it can align naturally with the
loaded rope.
Specifications
Working load limit:
SPIN L1: 8 kN.
SPIN L2: 8 kN.
SPIN L2 on one sheave: 6 kN.
Breaking strength: 36 kN.
Breaking strength of the auxiliary attachment hole (SPIN L2): 22 kN.
Hauling effectiveness (for one sheave): F = 1.05 M.
Efficiency (for one sheave): 95 %.
Efficiency is measured with a rope of the minimum diameter compatible with the
device.
Additional Information
This product meets the requirements of Regulation (EU) 2016/425 on personal
protective equipment. The EU declaration of conformity is available at
Petzl.com.
Pulley efficiency can vary depending on the condition of the rope: wet and/or
icy.
- The Instructions for Use must be provided to the user of this equipment, in the language of the country where the equipment is used.
- Keep the Instructions for Use in a permanent file for reference after removing them from the equipment.
- Make sure the markings on the product are legible.
When to retire your equipment:
WARNING: an exceptional event can lead you to retire a product after only one
use, depending on the type and intensity of usage and the environment of usage
(harsh environments, marine environments, sharp edges, extreme temperatures,
chemicals…).
A product must be retired when:
- It has exceeded its lifespan.
- It has been subjected to a major fall or load.
- It fails to pass inspection. You have any doubt as to its reliability.
- You do not know its full usage history (e.g. an illegible product marking).
- When it becomes obsolete due to changes in legislation, standards, technique or incompatibility with other equipment…
Destroy these products to prevent further use.
Icons:
A. Unlimited lifespan – B. Acceptable temperatures – C. Usage precautions
– D. Cleaning – E. Drying – F. Storage/transport – G. Maintenance – H.
Modifications/repairs (prohibited outside of Petzl facilities, except
replacement parts) – I. Questions/contact
3-year guarantee
Against any material or manufacturing defect. Exclusions: normal wear and
tear,oxidation, modifications or alterations, incorrect storage, poor
maintenance, negligence, uses for which this product is not designed.
Warning symbols
- Situation presenting an imminent risk of serious injury or death. 2. Exposure to a potential risk of accident or injury. 3. Important information on the functioning or performance of your product. 4. Equipment incompatibility.
Traceability and markings
a. Meets PPE regulatory requirements. Notified body performing the EU type examination – b. Number of the notified body responsible for the production control of this PPE – c. Traceability: datamatrix – d. Compatible diameter – e. Serial number – f. Year of manufacture – g. Month of manufacture – h. Batch number – i.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>