Imou QSG V1 Water Leak Sensor User Guide
- June 16, 2024
- imou
Table of Contents
Imou QSG V1 Water Leak Sensor User Guide
Package Contents
- Sensor x 1
- 3 M Sticker x 1
- Quick Start Guide x 1
- Warranty Card x 1
Specifications
- Wireless technology: Zigbee
- Working voltage: 3 VDC (with CR2032 battery)
- Operating temperature: +14°F to +131°F (-10°C to +55°C)
- Low battery notification: Supports
- Trigger distance: 0.90″±0.19″ (23±5 mm)
- Waterproof level: IP66
Overview
Device Setup
- If you already use the app, make sure that you are using the latest version.
Pairing Setup
-
Place the device close to the gateway. Make sure the gateway is powered on. Press the button on the front of the gateway and wait until the indicator slowly flashes blue.
-
Insert a coin or a flat head screwdriver into the slot at the rear lid and rotate anticlockwise to unscrew the lid.
-
Pull out the battery insulation film to power on the device, and then replace the lid.
-
Press the button at the center for 5 s until the LED indicator flashes green to enter the pairing mode.
Use the Imou Life app to scan the QR code on the manual and follow the instructions on the app.
Installation
Place the device on the flat ground.
- If the surface you’re placing on is not flat, please place the device at the lowest point.
Regulatory Information
European Directives Compliance
This product complies with the applicable CE marking directives and standards:
• Low Voltage (LVD) Directive 2014/35/EU.
• Electromagnetic Compatibility (EMC) Directive 2014/30/EU.
• Restrictions of Hazardous Substances (RoHS) Directive 2011/65/EU and its
amending Directive (EU) 2015/863.
A copy of the original declaration of conformity may be obtained from Imou.
The most up to date copy of the signed EU Declaration of Conformity (DoC) can
be downloaded from:
CE-Electromagnetic Compatibility (EMC)
This digital equipment is compliant with Class B according to EN 55032.
CE-Safety
This product complies with IEC/EN/UL 62368-1, Audio/video, information and communication technology equipment Part 1: Safety requirements and IEC/UL 60950-1: Safety of Information Technology Equipment.
RF Exposure Warning
(Only for the product has RF communication function) This equipment must be
installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter. End-users and
installers must be provided with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.
service.global@imoulife.com
https://www.imoulife.com/support/faq
https://www.imoulife.com
@imouglobal
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>