SAMSUNG HW-C450 2.1Ch Wireless Soundbar User Manual

SAMSUNG HW-C450 2.1Ch Wireless Soundbar

Specifications

• Model: HW-C450
• Product Type: Soundbar

Product Overview

The Samsung HW-C450 Soundbar offers an immersive audio experience for your home entertainment system. With its sleek design and powerful sound output, it is the perfect addition to any TV setup.

Front Panel

The front panel of the Soundbar features a display screen that shows the current settings and status of the device. It also includes touch-sensitive buttons for controlling the volume, power, and input selection.

Top Panel

The top panel of the Soundbar includes additional touch-sensitive buttons for easy access to various functions such as Bluetooth pairing, sound mode selection, and EQ adjustments.

Bottom Panel
|The bottom panel of the Soundbar houses the connection ports, including HDMI input, HDMI output, optical input, and a USB port. These ports allow you to connect the Soundbar to your TV, gaming console, or other audio devices.

Safety Information

Before using the Samsung HW-C450 Soundbar, please read and follow the safety instructions listed below:

1. Read these instructions carefully and keep them for future reference.
2. Do not remove the cover or back of the Soundbar. There are no user-serviceable parts inside. For servicing, please refer to qualified service personnel.
3. Avoid making any contact with internal parts of the Soundbar as it contains high voltage, which can cause electric shock.
4. Ensure that the Soundbar is placed in a well-ventilated area and not obstructed by any objects.
5. Do not use the Soundbar near water or in damp environments to prevent the risk of electrical shock.
6. Clean the Soundbar only with a dry cloth and avoid using any liquid or chemical cleaners.
7. Protect the power cord from being walked on or pinched to avoid damage.
8. Use only attachments and accessories specified by the manufacturer.
9. When not in use for an extended period, disconnect the AC plug from the wall outlet.
10. Properly dispose of the battery used in the Soundbar according to local regulations. Do not expose the battery to heat or fire.

Product Usage Instructions

Checking the Components
Before setting up the Soundbar, ensure that you have received all the necessary components. The package should include:

• HW-C450 Soundbar
• Remote Control
• Power Cord
• HDMI Cable
• User Manual

If any component is missing or damaged, please contact the customer support for assistance.

Connecting the Soundbar
“Follow these steps to connect the Soundbar to your TV:

1. Place the Soundbar in front of your TV, ensuring that it is centred and aligned properly.
2. Connect one end of the HDMI cable to the HDMI output port on the Soundbar.
3. Connect the other end of the HDMI cable to the HDMI input port on your TV.
4. If your TV does not have an HDMI port, you can connect the Soundbar using an optical cable. Connect one end of the optical cable to the optical input port on the Soundbar and the other end to the optical output port on your TV.
5. Plug one end of the power cord into the power input port on the Soundbar and the other end into a wall outlet.

Powering On the Soundbar
To power on the Soundbar, press the power button located on the front or top panel. The display screen will light up, indicating that the Soundbar is ready for use.

Adjusting Volume
To adjust the volume, use the volume up and volume down buttons on the remote control or the touch-sensitive buttons on the front or top panel of the Soundbar. Press the volume up button to increase the volume and the volume down button to decrease it.

Selecting Input Source
To select the input source, use the input selection buttons on the remote control or the touch-sensitive buttons on the front or top panel of the Soundbar. Press the corresponding button for the desired input source, such as HDMI or optical.

FAQs

Q: How do I register my product?
A: To receive complete service for your Samsung product, please register it at www.samsung.com/register.

Q: Can I use the Soundbar near water?
A: No, it is not recommended to use the Soundbar near water or in damp environments to prevent the risk of electrical shock.

Q: What should I do if I encounter a problem with the Soundbar?
A: If you experience any issues with the Soundbar, please refer to the troubleshooting section of the user manual or contact qualified service personnel for assistance.

Imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register

SAFETY INFORMATION

SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Refer to the table below for an explanation of symbols that may be on your Samsung product.

WARNING · To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. · To prevent injury, this apparatus must be securely attached or set on top of a solid surface/wall in accordance with the installation instructions.
CAUTION · Do not expose this apparatus to dripping or

CAUTION RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

splashing. Do not put objects filled with liquids, such as vases, on the apparatus. · To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.
CAUTION (for Canada)

This symbol indicates that this product has included important literature concerning operation and maintenance.
Class II product : This symbol indicates that it does not require a safety connection to electrical earth (ground). If this symbol is not present on a product with a power cord, the product MUST have a reliable connection to protective earth (ground).
AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the user manual for further safety related information.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device and its antenna(s) must not be colocated or operation in conjunction with any other antenna or transmitter. This device may automatically discontinue transmission if there is no information to transmit, or an operational failure. Note that this is not intended to prohibit the transmission of control or signaling information or the use of repetitive codes where required by the technology. This Class B digital apparatus complies with Canadian ICES-003.

Radiation Exposure Statement This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.
1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not alter in any way the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

PRECAUTIONS

1. Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.
2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit.
3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit to malfunction.
4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours or until the unit has reached room temperature before using.

5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct
sunlight, or fire. Do not short-circuit, disassemble, or overheat the battery. CUATION : Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type.

Remote Control / Batteries
Wall Mount Guide x 2
Bracket-Wall Mount

· For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit)
· To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care.
· The appearance of the accessories may differ slightly from the illustrations above.
· Design and specifications are subject to change without prior notice.

PRODUCT OVERVIEW
Front Panel / Top Panel of the Soundbar

Top Panel
Display Displays the product’s status and current mode. (Power) Button Turns the power on and off.

Auto Power Down Function
The unit turns off automatically in the following situations: ­ In D.IN / BT / USB Mode : If there is no audio signal for 18 minutes.

Volume) Button
Adjusts the volume.
When adjusted, the volume level appears on the Soundbar’s front display. (Source) Button Selects the source input mode.USB To turn on “BT PAIRING” mode, change the source to “BT” mode in “BT READY” state and then press and hold the (Source) button for more than 5 seconds. When you plug in the AC cord, the power button will begin working in 4 to 6 seconds. When you turn on this unit, there will be a 4 to 5 second delay before it produces sound. · If you want to enjoy sound only from the Soundbar, you must turn off the TV’s speakers in the Audio
Setup menu of your TV. Refer to the owner’s manual supplied with your TV.
Bottom Panel of the Soundbar

DIGITAL AUDIO IN

(OPTICAL)

POWER

USB (5V 0.5A)

POWER

DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)

POWER Connect the Soundbar’s AC power cable.
DIGITAL AUDIO IN (OPTICAL) Connect to the digital (optical) output of an external device.
USB (5V 0.5A) Connect a USB device here to play music files stored on the USB device through the Soundbar. When disconnecting the power cord from a wall outlet, pull the plug. Do not pull the cable. · Do not connect this unit or other components to an AC outlet until all connections between components are complete.

USING THE REMOTE CONTROL

Inserting Batteries before using the Remote Control (AAA batteries X 2)
Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries (1.5V) so that their orientation is correct. Slide the back cover back into position.
How to Use the Remote Control

SOUND MODE

CH LEVEL

WOOFER
TONE CONTROL

Power Source Mute Volume

Turns the Soundbar on and off.

Press to select a source connected to the Soundbar.

Press the (Mute) button to mute the sound. Press it again to unmute the sound.

Push the button up or down to adjust the volume.

SOUMNODDE

WOOFER

CONNECT

CH LEVEL

Mute Press the Volume button in to mute the sound. Press it in again to unmute the sound.

SOUMNODDE

WOOFER T

CH LEVEL

ENG – 10

By pressing the button, you can adjust the volume of each speaker.

CH LEVEL

Press the button to select VIRTUAL CENTER LEVEL and then adjust the volume

between -6~+6 by using the Up/Down buttons.

CH LEVEL

If the Rear Speakers (sold separately) are connected, the setting REAR LEVEL is

supported. To adjust the volume of the REAR LEVEL between -6 to +6 by using the Up/

Down buttons.Press the indicated areas to select Up/Down/Left/Right.

Up/Down/ Left/Right
Press Up/Down/Left/Right on the button to select or set functions. · Repeat
To use the Repeat function in “USB” mode, press the Up button. · Music Skip
Press the Right button to select the next music file. Press the Left button to select the previous music file. · ID SET Press and hold the Up button for 5 seconds to complete ID SET (when connecting to a wireless subwoofer or wireless rear speakers).

By pressing the button, you can set the audio function. The desired settings can be

adjusted using the Up/Down buttons.

AUDIO SYNC VOICE ENHANCE ON/OFF NIGHT MODE ON/OFF Sound Control ­ AUDIO SYNC

If the video on the TV and audio from the Soundbar are not synchronized, press the

(Sound Control) button to select AUDIO SYNC and then set the audio delay

between 0~300milliseconds by using the Up/Down buttons. (Not available in “USB”

or “BT” mode.)

­ VOICE ENHANCE ON/OFF

This mode is makes it easier to hear spoken dialog in movies and TV.

­ NIGHT MODE ON/OFF

This mode is optimized for nighttime viewing with the settings adjusted to bring the

volume down but keep the dialog clear.

· The VOICE ENHANCE, and NIGHT MODE audio function can be turned ON/OFF by using the Up/Down buttons.

· Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are

selectable using the Left/Right buttons and each can be adjusted to a setting between

-6 to +6 using the Up/Down buttons. (Make sure the Sound mode is set to “STANDARD”.)

Press the PAIR button. “BT PAIRING” appears in the Soundbar’s display.

You can connect the Soundbar to a new Bluetooth device in this mode by selecting the

Bluetooth Soundbar from the Bluetooth device’s search list.

PAIR

Press the p button to pause a music file temporarily.

When you press the button again, the music file will resume playing.

Play / Pause

Press the button to display information about the current function. (See page 8.)

Info

SOUND

By pressing the button, you can select the desired sound mode.

MODE
SURROUND SOUND GAME ADAPTIVE DTS VIRTUAL:X BASS BOOST

STANDARD SOUND MODE ­ SURROUND SOUND
Provides a wider sound field than standard.

­ GAME
Provides stereoscopic sound to immerse you in the action while gaming.

­ ADAPTIVE
Analyzes the content in real time and automatically provides an optimal sound field based on the characteristics of the content.

­ DTS VIRTUAL:X
Immersive 3D sound from any content.

­ BASS BOOST
Sound field mode with emphasis on bass sound.

­ STANDARD
Outputs the original sound.

· DRC (Dynamic Range Control) Lets you apply dynamic range control to Dolby Digital tracks. Press and hold the

SOUND MODE button for more than 5 seconds while the Soundbar is powered off to turn DRC (Dynamic Range Control) on or off. With the DRC turned on, loud sound is

reduced. (The sound may be distorted.)

· Bluetooth Power This feature automatically turns the Soundbar on when it receives a connection

request from a previously connected TV or Bluetooth device. The setting is On by

default.

­ Press and hold the SOUND MODE button for more than 5 seconds while the soundbar is powered on to turn off the Bluetooth Power function Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to

+6. To set the woofer (bass) volume level to 0 (Default), press the button.

TONE
By pressing the button, you can adjust the volume of the treble or bass sound.

CONTROL
Press the button to select TREBLE or BASS and then adjust the volume between -6~+6

by using the Up/Down buttons.

Using the Hidden Buttons (Buttons with more than one function)

Hidden Button

Remote Control Button

Function

WOOFER (Up)

TV remote control On/Off (Standby)

Left

TV Connect On/Off (BT Ready)

Up

ID SET

(Sound Control)

7 Band EQ (Press and hold 5 seconds) Reset (Press and hold 10 seconds)

SOUND MODE
DRC ON/OFF (Standby) Bluetooth Power

Reference page
page 15 page 22 page 12 page 11 page 32 page 12 page 12 Output specifications for the different sound effect modes

Input
2.0 ch 5.1 ch 2.0 ch 5.1 ch 2.0 ch 5.1 ch 2.0 ch 5.1 ch 2.0 ch 5.1 ch 2.0 ch 5.1 ch

Output
Without Wireless Rear Speaker Kit 2.1 ch 2.1 ch 2.1 ch 2.1 ch 2.1 ch 2.1 ch 2.1 ch 2.1 ch 2.1 ch 2.1 ch 2.1 ch 2.1 ch With Wireless Rear Speaker Kit 4.1 ch 4.1 ch 4.1 ch 4.1 ch 4.1 ch 4.1 ch 4.1 ch 4.1 ch 4.1 ch 4.1 ch 2.1 ch 2.1 ch

The Samsung Wireless Rear Speaker Kit can be purchased separately. To purchase a Kit, contact the vendor you purchased the Soundbar from.

Adjusting the Soundbar volume with a TV remote control
Adjust the Soundbar volume using the TV’s remote control.
· This function can be used with IR remote controls only. Bluetooth remote controls (remote controls that require pairing) are not supported.
· Set the TV speaker to External Speaker to use this function. · Manufacturers supporting this function:
Samsung, VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA
1. Turn Off the Soundbar. 2. Push up and hold the WOOFER button for 5 seconds.
Each time you push the WOOFER button up and hold it for 5 seconds, the mode switches in the following order: “OFF-TV REMOTE” (Default mode), “SAMSUNG-TV REMOTE”, “ALL-TV REMOTE”.

Remote Control Button

Display

Status

SOUMNODDE

WOOFER

5 Sec
TON CO

SOUMNODDE

WOOFER

5 Sec
TON CO

OFF-TV REMOTE
(Default mode)
SAMSUNG-TV REMOTE

Disable the TV remote control.
Enable a Samsung TV’s IR remote control.

SOUMNODDE

WOOFER

5 Sec
TON CO

ALL-TV REMOTE

Enable a third-party TV’s IR remote control.

ENG – 15

CONNECTING THE SOUNDBAR

Connecting Electrical Power
Use the power components to connect the Subwoofer and Soundbar to an electrical outlet in the following order: Connect the power cord to the Subwoofer. 2. Connect the power cord to the Soundbar. See the illustrations below. · For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit)

Power Cord

POWER

Power Cord

Rear of Subwoofer

Connecting Electrical Power

POWER
Bottom of the Soundbar Main Unit

Connecting Electrical Power
Connecting the Soundbar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound. Automatic connection between the Subwoofer and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar. · When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on. LED Indicator Lights on the Rear of Subwoofer

LED Blue
Red

Status On

Description Successfully connected (normal operation)

Blinking
Recovering the connection

Standby (with the Soundbar main unit turned off) On
Connection failed

Resolution
Check if the power cable attached to the main Soundbar unit is connected properly or wait about 5 minutes. If blinking persists, try manually connecting the subwoofer. See page 18. Check if the power cable attached to the main Soundbar unit is connected properly. Connect again. See the instructions for manual connection on page 18.

Red and blue
Blinking Malfunction

See the contact information for the Samsung Service Center in this manual. Manually connecting the Subwoofer if automatic connection fails Before performing the manual connection procedure below:
· Check whether the power cables for the Soundbar and subwoofer are connected properly. · Make sure that the Soundbar is turned on. 1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds.
· The red indicator on the rear of the subwoofer turns off and the blue indicator blinks.
5 Sec

Rear of Subwoofer
2. First, press the button on the remote control to turn on the display. Press and hold the Up button on the remote control for at least 5 seconds. · The ID SET message appears on the display of the Soundbar for a moment, and then it disappears. · The Soundbar will automatically power on when ID SET is complete.

PAIR
SAMSUNG logo is on the top

ID SETOUNDE
3. Check if the LINK LED is solid blue (connection complete).

Blue is On
The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Wireless Subwoofer.

NOTES · Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete. · Before moving or installing this product, be sure to turn off the power and disconnect the power cord. · If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the STANDBY LED on the rear of the sub-woofer will turn red after blinking blue several times. · If you use a device that uses the same frequency (5.8GHz) as the Soundbar near the Soundbar, interference may cause some sound interruption. · The maximum transmission distance of the main unit’s wireless signal is about 32.8 ft (10 m), but may vary depending on your operating environment. If a steel-concrete or metallic wall is between the main unit and the wireless subwoofer, the system may not operate at all because the wireless signal cannot penetrate metal.

PRECAUTIONS · Wireless receiving antennas are built into the wireless subwoofer. Keep the unit away from water and moisture. · For optimal listening performance, make sure that the area around the wireless subwoofer and the Wireless Receiver Module (sold separately) is clear of any obstructions.

Connecting the Samsung Wireless Rear Kit to your Soundbar
Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-9200S sold separately) to your Soundbar. For detailed information on connections, see the Samsung Wireless Rear Speaker Kit manual.

USING A WIRED CONNECTION TO THE TV

Hear TV sound from your Soundbar through wired or wireless connections. · When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. ­ This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable. ­ This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute.

Connecting using an Optical Cable
When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format” on your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may use different words for Dolby Digital and PCM depending on the TV manufacturer.)
Pre-connection Checklist · When you use an optical cable and the terminals have covers, be sure to remove the covers.

· When using an optical cable, it must be set to “D.IN” mode.

OPTICAL OUT

Optical Cable

Top of the Soundbar

Bottom of the Soundbar
DIGITAL AUDIO IN (OPTICAL)Connect the DIGITAL AUDIO IN (OPTICAL) port on the Soundbar to the OPTICAL OUT port of the TV with a digital optical cable.
Press the (Source) button on the top panel or remote control, and then select the “D.IN” mode.

USING A WIRELESS CONNECTION TO THE TV
Connecting a TV via Bluetooth
When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. · Only one TV can be connected at a time.
PAIR
OR

The initial connection

Press the PAIR button on the remote control to enter the “BT PAIRING” mode.

(OR)

a. Press the (Source) button on the top panel and then select “BT”. “BT” changes to “BT PAIRING” in a few seconds automatically or changes to “BT READY” if there is a connect record.

b. When “BT READY” appears, press and hold the (Source) button on the top panel of the Soundbar for more than 5 seconds to display “BT PAIRING”.

2. Select Bluetooth mode on the TV. (For more information, see the TV’s manual.) Select “[AV] Samsung Soundbar C4-Series” or “[AV] Soundbar C4-Series” from the list on TV’s
screen. An available Soundbar is indicated with “Needs Pairing” or “Paired” on the TV’s Bluetooth device list. To connect the TV to the Soundbar, select the message, and then establish a connection. · When the TV is connected, [TV Name] “BT” appears on the Soundbar’s front display. 3. You can now hear TV sound from the Soundbar.

If the Soundbar is not found by the TV · Connect the TV and Soundbar with an optical cable, and select the “D.IN” mode by pressing (Source) button on the top of the Soundbar. See if the audio output works normally, and proceed with the step 2 and 3.

If the device fails to connect · If a previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar C4-Series” or “[AV] Soundbar C4-Series”) appears in the list, delete it. · Then repeat steps 1 through 3.
NOTE · After you have connected the Soundbar to your TV the first time, use the “BT READY” mode to reconnect.
Disconnecting the Soundbar from the TV Press the (Source) button on the top panel or on the remote control and switch to any mode but “BT”.
· Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.)
· To cancel the automatic Bluetooth connection between the Soundbar and TV, press the Left button on the remote control for 5 seconds with the Soundbar in “BT READY” status. (TV Connect On/Off)
What is the difference between BT READY and BT PAIRING? · BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. · BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the PAIR button on the remote control or press and hold the (Source) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode and in “BT READY” state.)
NOTES · If asked for a PIN code when connecting a Bluetooth device, enter

CONNECTING AN EXTERNAL DEVICE

Connect to an external device via a wired connection or Bluetooth connection to play the external device’s sound through the Soundbar.

Connecting using an Optical Cable

BD / DVD player / Set-top box / Game console

OPTICAL OUT

Optical Cable

Top of the Soundbar

Bottom of the Soundbar
DIGITAL AUDIO IN (OPTICAL)

D.IN
1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT port of the Source Device using a digital optical cable.
2. Select “D.IN” mode by pressing the (Source) button on the top panel or on the remote control.

ENG – 23

08 CONNECTING A USB STORAGE DEVICE

You can play music files located on USB storage devices through the Soundbar.

USB port

POWER

DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)

USB (5V 0.5A)

USB

1. Connect the USB device to the USB port on the bottom of the product. 2. Press the (Source) button on the top panel or on the remote control, and then select “USB”. 3. “USB” appears in the display screen. 4. Play music files from the USB storage device through the Soundbar.
· The Soundbar automatically turns off (Auto Power Down) if no USB device has been connected for more than 18 minutes.

ENG – 24

File Format Type Compatibility list

Extension .mp3
.wma .ogg .aac .m4a .mp4 (Audio Only) .wav .flac *.aiff

Codec MPEG 1 Layer2 MPEG 1 Layer3 MPEG 2 Layer3 MPEG 2.5 Layer3 WMA7/8/9 Vorbis
AAC-LC (MPEG2,/ MPEG4)
LPCM FLAC AIFF

Sampling Rate 32kHz ~ 48kHz 32kHz ~ 48kHz 16kHz ~ 24kHz 8kHz ~ 12kHz 32kHz ~ 48kHz 32kHz ~ 48kHz
32kHz ~ 48kHz
32kHz ~ 192kHz 32kHz ~ 192kHz 32kHz ~ 192kHz

Bitrate 32kbps~320kbps 32kbps~320kbps 8kbps~160kbps 8kbps~160kbps 32kbps~320kbps 45kbps~500kbps
32kbps~320kbps
1,024kbps~9,216kbps 162kbps~8,100kbps 1,024kbps~9,216kbps

· If there are too many folders (about 256) and files (about 999) stored on the USB device, it may take the Soundbar some time to access and play files.
· Supported USB file system : FAT16, FAT32, NTFS

Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
· You cannot connect more than one Bluetooth device at a time.

a. Press the (Source) button on the top panel and then select “BT”. “BT” changes to “BT PAIRING” in a few seconds automatically or changes to “BT READY” if there is a connect record.

b. When “BT READY” appears, press and hold the (Source) button on the top panel of the Soundbar for more than 5 seconds to display “BT PAIRING”.

2. On your device, select “[AV] Samsung Soundbar C4-Series” or “[AV] Soundbar C4-Series” from the list that appears. · When the Soundbar is connected to the Bluetooth device, [Bluetooth Device Name] “BT” appears in the front display.
3. Play music files from the device connected via Bluetooth through the Soundbar.

If the device fails to connect
· If a previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar C4-Series” or “[AV] Soundbar C4-Series”) appears in the list, delete it.
· Then repeat steps 1 and 2.
NOTE · After you have connected the Soundbar to your mobile device the first time, use the “BT READY” mode to reconnect.

What is the difference between BT READY and BT PAIRING? · BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. · BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the PAIR button on the remote control or press and hold the (Source) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode and in “BT READY” state.)
NOTES · If asked for a PIN code when connecting a Bluetooth device, enter

Disconnecting the Bluetooth device from a Soundbar
You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s user manual.
· The Soundbar will be disconnected. · When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display
“BT DISCONNECTED” on the front display.
Disconnecting the Soundbar from the Bluetooth device
Press the (Source) button on the top panel or on the remote control, and then change to any mode except “BT”.
· Disconnecting takes time because the Bluetooth device must receive a response from the Soundbar. (Disconnection time may differ, depending on the Bluetooth device)
· When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED” on the front display.
NOTES · In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 32.8 ft (10 m). · The Soundbar automatically turns off after 18 minutes in the Ready state.
More About Bluetooth Bluetooth is a technology that enables Bluetooth- compliant devices to interconnect easily with each other using a short wireless connection.
· A Bluetooth device may cause noise or malfunction, depending on usage, if: ­ A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Soundbar. ­ It is subject to electrical variation from obstructions caused by a wall, corner, or office partition. ­ It is exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens, and wireless LANs.
· Pair the Soundbar with the Bluetooth device while they are close together. · The further the distance between the Soundbar and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational range, the connection is lost. · In poor reception areas, the Bluetooth connection may not work properly. · The Bluetooth connection only works when it is close to the unit. The connection will be
automatically cut off if the Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as walls or doors. · This wireless device may cause electric interference during its operation.
ENG – 28

INSTALLING THE Wallmount Components WALL MOUNT
Installation Precautions
· Install on a vertical wall only. · Do not install in a place with high
temperature or humidity. · Verify whether the wall is strong enough to
support the product’s weight. If not, reinforce the wall or choose another installation point.
· Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.). If
possible, fix the support screws into wall studs. · Purchase wall mounting screws according to the type and thickness of the wall you want to mount the Soundbar on.
­ Diameter: M5 ­ Length: 1 3/8 inches (35 mm) or longer
recommended. · Connect cables from the unit to external
devices before you install the Soundbar on the wall. · Make sure the unit is turned off and unplugged from the power source before you install it. Otherwise, it may cause an electric shock.

Wall Mount Guide
x 2 Holder-Screw
x 2 (M4 x L10)
Screw
x 2

Bracket-Wall Mount

1. Place the Wall Mount Guide against the wall surface. · The Wall Mount Guide must be level. · If your TV is mounted on the wall, install the Soundbar at least 2 inches (5 cm) below the TV.

2 inches (5 cm) or more

ENG – 29

2. Align the Wall Mount Guide’s Center Line with the center of your TV (if you are mounting the Soundbar below your TV), and then fix the Wall Mount Guide to the wall using tape. · If you are not mounting below a TV, place the Center Line in the center of the installation area.

5. Push a screw (not supplied) through each Holder-Screw, and then screw each screw firmly into a support screw hole.
(Not supplied)

6. Install the 2 Bracket-Wall Mounts in the correct orientation on the bottom of the Soundbar using 2 Screws.
Center Line 3. Push a pen tip or sharpened pencil tip
through the center of the A-TYPE images on each end of the Guide to mark the holes for the supporting screws, and then remove the Wall Mount Guide.

4. Using an appropriately sized drill bit, drill a hole in the wall at each marking. · If the markings do not correspond to the positions of studs, make sure you insert appropriate anchors into the holes before you insert the support screws. If you use anchors, make sure the holes you drill are large enough for the anchors you use.

· When assembling, make sure the hanger part of the Bracket-Wall Mounts are located behind the rear of the Soundbar. Rear of Soundbar
Right end of Soundbar

ENG – 30

7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the

11

Bracket-Wall Mounts on the Holder-Screws

on the wall.

PLACING THE SOUNDBAR ON A TV STAND

Place the Soundbar on a TV stand.

8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely on the Holder-Screws. · Insert the Holder-Screws into the wide (bottom) part of the Bracket-Wall Mounts, and then slide the Bracket-Wall Mounts down so that the Bracket-Wall Mounts rest securely on the Holder- Screws.

1.2 inches (3cm) or more

As illustrated in the image, align the center of the Soundbar with the center of the TV, carefully place the Soundbar onto the TV stand. For optimal sound quality, position the Soundbar at least 1.2 inches (3 cm) away from the TV front.

NOTE
· Make sure the Soundbar is placed on a flat and solid surface.

ENG – 31

SOFTWARE UPDATE

Samsung may offer updates for the Soundbar’s system firmware in the future.
USB port

POWER

DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)

USB (5V 0.5A)

If an update is offered, you can update the
firmware by connecting a USB device with the firmware update stored on it to the USB port on your Soundbar. For more information about how
to download update files, go to the Samsung Electronics website at www.samsung.comSupport. Then, select the product type or enter the model number of your Soundbar, select the Software & Apps option, and then Downloads. Note that the option names can vary.

Update Procedure
Important: The update function erases all user settings. We recommend you write down your settings so that you can easily reset them after
the update. Note that updating the firmware resets the subwoofer connection too.
1. Connect a USB thumb drive to the USB port on your computer. Important: Make sure there are no music
files on the USB thumb drive. This may cause
the firmware update to fail. 2. Go to (samsung.com) select Enter Model
Number and enter the model of your Soundbar. Select manuals and downloads and download the latest software file. 3. Save the downloaded software to a USB stick and select “Extract Here” to unzip the folder. 4. Turn off the Soundbar and connect the USB stick containing the software update to the USB port. 5. Turn on the Soundbar and change the source to “USB” mode. Within 3 minutes, “UPDATE” is displayed and the update begins. 6. When the update is complete, the Soundbar turns off. Turn on the Soundbar and then press the (Volume) button on the top panel for 5 seconds. “INIT OK” appears on the display and the Soundbar is reset. · This product has a DUAL BOOT function.
If the firmware fails to update, you can update the firmware again. Soundbar AC code on when USB in with update file. Then update again but VFD no show anything, It will update finish after 2min. 7. Restore your settings on the Soundbar.

ENG – 32

If UPDATE is not displayed
1. Turn off the Soundbar, disconnect and then reconnect the USB storage device that contains the update files to the Soundbar’s USB port.
2. Disconnect the Soundbar’s power cord, reconnect it, and then turn on the Soundbar.
NOTES · The firmware update may not work properly if audio files supported by the Soundbar are stored in the USB storage device. · Do not disconnect the power or remove the USB device while updates are being applied. · After the update is completed, the user setup in the Soundbar maybe will be initialized. So we recommend you write down your settings so that you can easily reset them after the update. Note that updating firmware resets the subwoofer connection too. If the connection to the subwoofer is not re-established automatically after the update, refer to page 17. If the software update fails, check if the USB stick is defective. · Mac OS users should use MS-DOS (FAT) as the USB format. · Updating via USB may not be available, depending on the USB storage device manufacturer.
ENG – 33

TROUBLESHOOTING

Before seeking assistance, check the following.
Soundbar does not turn on.
; Check whether the power cord of the Soundbar is correctly inserted into the outlet.
Soundbar works erratically.
; After removing the power cord, insert it again.
; Power the external device off/on and try again.
; If there is no signal, the Soundbar automatically turns off after a certain period of time. Turn on the power. (See page 8.)
If the remote control does not work.
; Point the remote directly at the Soundbar. ; Replace the batteries with new ones.
Soundbar does not output any sound.
; The volume of the Soundbar is too low or muted. Adjust the volume.
; When any external device (STB, Bluetooth device, mobile device, etc.) is connected, adjust the volume of the external device.
; For sound output of the TV, select Soundbar. (Samsung TV: Home ( ) Menu Settings ( ) All Settings ( ) Sound Sound Output Select Soundbar)
; The cable connection to the Soundbar may be loose. Remove the cable and connect again.
; Remove the power cord completely, reconnect, and turn the power on.
; Reset the product and try again. (See page 32.)

Subwoofer does not output any sound.
; Check whether the LED indicator on the rear of the Subwoofer is on in blue. Reconnect the Soundbar and Subwoofer if the indicator is blinking slowly in blue or turned red. (See page 18.)
; You may experience an issue if there is an obstacle between the Soundbar and Subwoofer. Move devices to an area away from obstacles.
; Other devices sending radio frequency signals in proximity may interrupt the connection. Keep your speaker away from such devices.
; Remove and reconnect the power plug.
The Subwoofer volume is too low.
; The original volume of the content you are playing may be low. Try adjusting the Subwoofer level. (See page 13.)
; Bring the Subwoofer speaker closer to you.
Soundbar does not appear on the Bluetooth
device list of the TV.
; Disconnect the power cord of the Soundbar completely and reconnect, and then try searching again. (See page 21.)
; Connect the TV and Soundbar with an optical cable, and select the “D.IN” mode by pressing the (Source) button on the top of the Soundbar. See if the audio output works normally, and try searching again. (See page 21.)

Soundbar does not connect via Bluetooth.
; When connecting a new device, switch to “BT PAIRING” for connection. (Press the PAIR button on the remote control or press the (Source) button on the top of the soundbar for at least 5 seconds.)
; If the Soundbar is connected to another device, disconnect that device first to switch the device.
; Reconnect it after removing the Bluetooth speaker list on the device to connect. (Samsung TV: Home ( ) Menu Settings ( ) All Settings ( ) Sound Sound Output Bluetooth Speaker List)
; Remove and reconnect the power plug, then try again.
; Reset the product and try again. (See page 32.)
Sound drops out when connected via Bluetooth.
; Some devices can cause radio interference if they are located too close to the Soundbar. e. g. microwaves, wireless routers, etc.
; If your device that is connected via Bluetooth moves too far away from the Soundbar, it may cause the sound to drop out. Move the device closer to the Soundbar.
; If a part of your body is in contact with the Bluetooth transceiver or the product is installed on metal furniture, sound may drop out. Check the installation environment and conditions for use.
Soundbar does not turn on automatically with the TV.
; When you turn off the Soundbar while watching TV, power synchronization with the TV is disabled. First turn off the TV.

LICENSE
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Confidential unpublished works. Copyright 1992-2019 Dolby Laboratories. All rights reserved. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, Digital Surround, Virtual:X, and the DTS logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Samsung Electronics Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.

OPEN SOURCE LICENSE NOTICE

ENERGY STAR qualified model only ­ Your Samsung product is ENERGY STAR
qualified in its factory default setting. Change to certain features, settings and functionality in this product can change the power consumption, possibly beyond the limits required for ENERGY STAR
qualification. ­ Environmental Protection Agency and
Department of Energy. ENERGY STAR is a joint program of the Government agencies,
designed to promote energy efficient products and practices. Refer to www.energystar.gov for more information of the ENERGY STAR Program.
ENERGY STAR qualified model only (Applicable to Thin Client models only) As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy
efficiency. ­ The ENERGY STAR Program has been to
reduced greenhouse gas emissions and save energy through voluntary labeling. ­ Power management setting of this product have been enabled by default, and have various timing setting from 1 minutes to 5 hours. ­ The product can wake with a button press on the chassis from sleep mode.
ENERGY STAR qualified model only (The other models) ­ As an ENERGY STAR Partner, Samsung has
determined that this product or product models meets the ENERGY STAR guideline
for energy efficiency.

To send inquiries and requests for questions regarding open sources, contact Samsung Open Source (http://opensource.samsung.com)
16 IMPORTANT NOTES ABOUT SERVICE
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

SPECIFICATIONS AND GUIDE

Model Name USB Weight
Dimensions (W x H x D)
Operating Temperature Range Operating Humidity Range AMPLIFIER Rated Output power Supported play formats (DTS 2.0 sound is played in DTS format.)

HW-C450 5V/0.5A 3.1 lbs (1.4 kg) 33.8 x 2.3 x 3.0 inches (858.8 x 59.0 x 75.0 mm) +41°F to +95°F (+5°C to +35°C) 10 % ~ 75 %
40W x 2, 6 ohm LPCM 2ch, Dolby AudioTM (supporting Dolby® Digital), DTS

Subwoofer Name Weight
Dimensions (W x H x D)
AMPLIFIER Rated Output power

PS-WC45T 9.9 lbs (4.5 kg) 7.2 x 13.5 x 11.6 inches (184.0 x 343.0 x 295.0 mm)
220W

NOTES · Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. · Weight and dimensions are approximate.

LIMITED WARRANTY TO ORIGINAL PURCHASER
Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center. (The name and address of the location nearest you can be obtained by calling toll free: 1- 800- SAMSUNG)

LABOR One year (Carry- in)

PARTS One year
On carry-in models, transportation to and from the service center is the customer’s responsibility. The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. It must be presented to the authorized service center at the time service is requested.

EXCLUSIONS (WHAT IS NOT COVERED)
This warranty does not cover damage due to accident, fire, flood and/ or other acts of God; misuse, incorrect line voltage, improper installation, improper or unauthorized repairs, commercial use or damage that occurs in shipping. Exterior and interior finish, lamps, glass are not covered under this warranty. Customer adjustments which are explained in the instruction manual are not covered under the terms of this warranty. This warranty will automatically be voided for any unit found with a missing or altered serial number. This warranty is valid only on products purchased and used in Canada.

Samsung Electronics Canada Inc 2050 Derry Rd West
Mississauga, On. L5N 0B9 Tel: 1-800-SAMSUNG (726-7864)
Fax: (905) 542- 1199 Website: www.samsung.com/ca

© 2023 Samsung Electronics Co., Ltd. All rights reserved. Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Center.
HEADQUARTERS Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada TEL: 1-800-SAMSUNG (1-800-726-7864) www.samsung.com/ca/support
Country ` North America
CANADA U.S.A

References

• Samsung Open Source
• Patents - DTS
• Homepage | ENERGY STAR
• Samsung Canada | Mobile | TV | Home Appliances
• Samsung US | Mobile | TV | Home Electronics | Home Appliances | Samsung US
• Samsung Canada | Mobile | TV | Home Appliances
• Samsung Canada | Mobilité | Téléviseurs | Électroménagers
• Aide et assistance : produits | Samsung Canada
• Product Help & Support | Samsung CA
• Support Home | Official Samsung Support US

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>