IMOU CR2032 Smart Temperature and Humidity Sensor User Guide
- June 16, 2024
- imou
Table of Contents
IMOU CR2032 Smart Temperature and Humidity Sensor User Guide
Temperature & Humidity Sensor
Quick Start Guide
V1.0.0
Package Contents
- Sensor x 1
- 3 M Sticker x 1
- Mounting Bracket x 1
- Battery x 2
- Quick Start Guide x 1
- Warranty Card x 1
Specifications
- Wireless technology: Zigbee
- Working voltage: 3 VDC (with CR2032 battery)
- Temperature sensing range: +14°to +131°F
- Temperature sensing range: -10°C to +55°C
- Humidity sensing range: 0% RH to 99% RH
- Low voltage notification: Support
Overview
Device Setup
- Scan the QR code below or search for “Imou Life” in the app store to download and install the app.
If you already use the app, make sure that you are using the latest version.
Pairing Setup
-
Place the device close to the gateway. Make sure the gateway is powered on. Press the button on the front of the gateway and wait until the indicator slowly flashes blue.
-
Twist the battery cover anticlockwise to remove it and fix two AAA batteries into the unit to power on the device.
-
Hold down the button for 5 s until the wireless signal flashes.
Use the Imou Life app to scan the QR code on the manual and follow the instructions on the app.
Installation
Method 1 Mount the device on the spot
Remove the protective film from the 3M adhesive sticker, and attach the device
to where you want to install.
**Method 2 Place it with a mounting bracket.
**
Regulatory Information
European Directives Compliance
This product complies with the applicable CE marking directives and standards:
- Low Voltage (LVD) Directive 2014/35/EU.
- Electromagnetic Compatibility (EMC) Directive 2014/30/EU.
- Restrictions of Hazardous Substances (RoHS) Directive 2011/65/EU and its amending Directive (EU) 2015/863.
A copy of the original declaration of conformity may be obtained from Imou.
The most up to date copy of the signed EU Declaration of Conformity (DoC) can
be downloaded from: https://en.imou-life.com/support/downloadCenter/eudoc.
CE-Electromagnetic Compatibility (EMC)
This digital equipment is compliant with Class B according to EN 55032.
CE-Safety
This product complies with IEC/EN/UL 62368-1, Audio/video information and
communication technology equipment – Part 1: Safety requirements and IEC/UL
60950-1: Safety of Information Technology Equipment.
RF Exposure Warning
(Only for the product has F communication function)
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for satisfying
RF exposure compliance.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.
https://www.imoulife.com/support/faq
@imouglobal
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>