Imou IOT-ZE1-EU Smart Home Wireless Switch User Guide
- June 16, 2024
- imou
Table of Contents
Imou IOT-ZE1-EU Smart Home Wireless Switch
Package Contents
- Sensorx 1
- 3 M Sticker x 1
- Quick Start Guide x 1
- Warranty Card x 1
Specifications
- Wireless technology: Zigbee
- Working voltage: 3 VDC (with CR2032 battery)
- Wireless frequency band: 2.4 GHz
- Operating temperature:+ 14°F to+ 131 °F (-10°( to + SS°C)
- Low battery notification: Supports
Overview
Device Setup
- Scan the QR code below or search for “lmou Life” in the app store to download and install the app.
If you already use the app, make sure that you are using the latest version.
Pairing Setup
Use the lmou Life app to scan the QR code on the manual and follow the instructions on the app.
- Place the device close to the gateway. Make sure the gateway is powered on. Press the button on the front of the gateway and wait until the indicator slowly flashes blue.
- Insert a coin or a fiat head screwdriver into the slot at the rear lid, and rotate anticlockwise to unscrew the lid.
- Pull out the battery insulation film to power on the device, and then replace the lid.
- Use a pin to press the reset button for 5 s until the LED flashes green to enter the pairing mode.
Installation
- Install the device on the table or the floor.
- Place the device on a fiat and clean spot.
- Mount the device on the door or the wall.
- Remove the protective film from the 3M adhesive sticker, and attach the device to where you want to install.
service.global@imoulife.com
https://www.imoulife.com/support/faq
https://www.imoulife.com
@imouglobal
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>