BLAUPUNKT Aspen 140 USB Media Player Instruction Manual

BLAUPUNKT Aspen 140 USB Media Player

Product Information

Specifications

• Product : USB MEDIA PLAYER Aspen 140
• Supported Formats : MP3, WMA

Product Usage Instructions

Power On/Off
To power on the USB MEDIA PLAYER Aspen 140, press and hold the power button for a few seconds. To power off, press and hold the power button again until the device turns off.

Playback Controls
The USB MEDIA PLAYER Aspen 140 offers various playback controls for an enhanced user experience

• Play/Pause: Press the play/pause button to start or pause playback.
• Next/Previous Track: Press the next or previous track button to skip to the next or previous track respectively.
• Fast Forward/Rewind: Press and hold the fast forward or rewind button to fast forward or rewind within the current track.
• +10/-10 File Function: To skip +10/-10 files while playing MP3/WMA files, press and hold the DIR+ or DIR- button for 2 seconds.

Volume Control
To adjust the volume level, use the volume up and volume down buttons located on the device. Press the volume up button to increase the volume and press the volume down button to decrease the volume.

Frequently Asked Questions (FAQ)

• Q: How do I transfer music files to the USB MEDIA PLAYER Aspen 140?
  A: To transfer music files, connect the USB MEDIA PLAYER Aspen 140 to your computer using the provided USB cable. The device will be recognized as a removable storage device. Simply drag and drop your music files into the appropriate folder on the device.

• Q: What file formats are supported by the USB MEDIA PLAYER Aspen 140?
  A: The USB MEDIA PLAYER Aspen 140 supports MP3 and WMA file formats.

• Q: Can I use headphones with the USB MEDIA PLAYER Aspen 140?
  A: Yes, you can connect headphones to the device using the headphone jack located on the device.

Operating instructions

OPERATION

ATTENTIONS OF INSTALLATION

1. This player should be installed by professional technician.
2. please read the instruction and operation of equipment carefully before installing.
3. Make sure to connect other wires before power connection.
4. To avoid short circuit. Please make sure all the exposed wire are insulating.
5. please fix all the wires after installation.
6. please make connection to the player accordingly to this instruction manual. Wrong connection may cause damage.
7. This player only fit for 12V DC device and please make sure your car belongs to this kind of cathode grounding electrical system.
8. Please connect the wires rightly. Wrong connection will cause malfunction or damage the electrical system.

INSTALL THE UNIT

1. Insert Mounting sleeve D into car.
2. Bend these claws outward for a tight fit, if necessary
3. Insert Outer trim Frame 2 to the unit
4. Insert the unit into the mounting sleeve.

REMOVE THE UNIT

1. Detach the front panel.
2.  Take out the outer trim frame.
3. Insert the keys supplied on the both sides of the unit until they click. Pulling the keys and makes them to remove the unit from the dashboard.

WIRING CONNECTION

1. This player can only be used by the 12V DC.
2. Do not connect the battery terminal until the player is fully well installation.
3. Please make sure to connect the yellow wire to the positive of the battery+).
4. When change the fuse. Please make sure the specifications are same.
5. Using good quality speaker with 48 ohm can result in the best effect of the equipment.

LOCATION OF KEYS

1. . – (panel release) button.
2. 0/4* (POWER/MUTE) button.
3. BAND button.
4. VOL-/+ (Volume up/down) button.
5. 7 /SRC(Source) button.
6. 144(SEEK DOWN) button.
7. (SEEK UP) button.
8. 1 Ali button.
9. 2 SCN button. 1
10. 3RPT button.
11. 4RDM button.
12. 5 DIR- button
13. 6DIR+ button
14. DISP (Display)button.
15. Aux in Jack.
16. USB (DCSV) Port for charging
17. USB (MUSIC) Port for play music.
18. LCD display.
19. MIC.
20. RESET button

BASIC OPERATION

• Turn on/off the unit and mute function
  Press button to turn on the unit. When system is on. Shortly press this button for mute on/off. Press and hold this button to turn off the unit.

• Audio and setting menu adjustment
  BAS(Bass) > TRE(Treble) >BAL(Balance) >FAD(Fader) ->LOUD->EQ-> STEREO/MONO->DX/LOC
  In each item. Rotating the VOL knob to set them.

• LOUD : In small volume set it on to reinforce the bass output. The sound will be better.

• EQ : In EQ item, Rotate VOL knob to set the preset EQ as below
  POP->ROCK >CLASS->JAZZ->FLAT>EQ OFF

• STEREO/MONO : STEREO: Receive FM stereo signal.

• MONO : Change FM stereo to monochrome. It can reduce the noise when the signal is weak.

• DX/LOC (Distance/Local)

• LOC : Receive the strong signal station only.
  DX : Receive strong and weak signal station.

• Show Clock
  Shortly press DISP button to show the clock for several seconds.

• Manual Clock setting
  Press and hold DISP button for 2 seconds. The “HH” will be flashing. Rotating the VOL knob to adjust the hour. After that press SEL button the “MM” will be flashing. Rotate VOL knob to adjust the minute. Then press DISP button to confirm and exit.

• Reset the unit
  Press RESET key to restore all the data to factory settings( Note : all memories will be lost.)

• Play music via the aux in 3.5mm jack
  Press SRC button to switch to AUX IN mode when inserted an audio source to the 3.5mm jack of the unit.

• RADIO OPERATION

• Receive a radio station
  Press SRC button to select radio mode. Then press BAND button to select a band. Shortly press button to seek the desired radio station. Press and hold button for manual tuning the frequency.

• Auto Store station
  Press and hold BAND button for 2 seconds to auto store stations to numeric buttons 1-6 of band 1~3.

• Manually store station & recall preset station
  Tuning to a station with button. Press and hold one of the 1-6 preset button for 2 seconds. The current station is stored into the number button. Shortly press the preset button (1~6) to directly listen to the station that saved in the corresponding preset button.

• USB operation
  When an USB driver inserted to the unit, the unit will play the MP3/WMA file automatically. If an USB drive is already inserted in the unit. Keep pressing SRC button shortly until the USB mode display appears.

• Select file
  Press button to skip to next/previous file. Hold button to fast forward or fast reverse.

• Play/Pause
  Press Icon to pause/play the song.

• SCN function
  Press SCN button to play the first 10 seconds each file. Press SCN button again to cancel this function.

• RPT function
  Press RPT button to select RPT ONE/RPTDIR/RPT ALL mode.
  RPT ALL (default): Repeat all files.
  RPT ONE Repeat playing the current playing song.
  RPT DIR : Repeat all files of this folder.

• Random function
  Procs ROM button all file will ho laved randomly Press it again to cancel this function

• Select a Directory
  Press DIR+/DIR-button to select directory upward or downward.

• +10/-10 file function (for MP3/WMA)
  Press and hold DIR+/ DIR- button for 2 seconds to skip +10/-10 file to play.

• Song search
  Press and hold BAND button to select song search, begin to shows “NUM0000*, You can select the song by directly enter numeric buttons: 0~9 (SRC=7, 8, PPI=9, DISP=0). You also can rotate the VOL knob to select the numeric. Then press VOL to play.

CAUTION

1.  When connecting an MP3 player which has normal battery (non rechargeable battery),you should remove the battery from the MP3 player then connect it to the USB interface. Otherwise, it may cause battery burst.
2. When there are important files in the USB device, do not connect it to the main unit to play. Because any wrong operation may cause files loss. And our company assumes no responsibility for this.

BLUETOOTH OPERATION

• PAIRING
  On mobile phone, select the Bluetooth item searching the Bluetooth device. “Aspen 140” should appear in the list, select “Aspen 140” and then input password “0000” if it needs a password. When successful paired, the BT mark will be displayed on LCD.

• Answering / rejecting an incoming call
  Press   key to answer the coming call. Press key to reject or hang up the call.

• Call-out function
  Please use your mobile phone to call-out.

• Transfer the call between mobile phone and unit
  During the talking mode, you can press  button to transfer the phone call between the mobile phone and the unit.

• Bluetooth audio (A2DP function)
  Press Il key to pause/play the song. Press button to select next/previous song.

GENERAL

Power Supply Requirements : DC 12V Volts, Negative Ground
Chassis Dimension s:178 (W) ×97 (D) × 50 (H)

Tone Controls

• Bass (at 100 Hz) : 10 dB
• Treble (at 10 kH7) : 10dB
• Maximum Output Power :4×40 watts
• Current Drain : 10 Ampere (max.)

RADIO                                                     FM AM

• (MW) Frequency Coverage             87.5 to 108 MHz.                                                         520 to 1710 KHz
• Sensitivity                                          4mV(S/N=30dB)                                                          36dBuV(S/N=20dB)
• Stereo Separation                               >25dB                                                                             /

TROUBLE SHOOTING

Before going through the checklist, check wiring connection. If any of the problems persist after checklist has been made, consult your nearest service dealer.

connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC’:
The fuse is blown.| Replace the fuse.
No sound.| Volume is in minimum| Adjust volume to a desired level.
Wiring is not properly connected.| Check wiring connection.
The operation keys do not work.| The built-in microcomputer is not operating properly due to noise.| Press the reset button.
The radio does not Work. The radio station automatic selection does not work.| The antenna cable is not connected.| Insert the antenna cable firmly.
The signals are too weak.| Select a station manually.

FOR MORE LANGUAGES, PLEASE SCAN QR CODE BELOW

• BP Americas Corp. Doral, Florida 33178 USA
• www.bpcarusa.com
• BP Americas Paraguay S.A. Asunción, Paraguay
• [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>