IOGEAR GCS32HU 2 Port Full HD KVM Switch User Guide

: June 16, 2024
: Iogear

Table of Contents

Package Contents
System Requirements
Overview
Hardware Installation
Limited Warranty
EMC Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Start Guide
2-Port Full HD KVM Switch with
HDMI® and USB Connections
GCS32HU-a
PART NO. Q1682
www.iogear.com

Package Contents

1 x GCS32HU
1 x Remote Port Selector
1 x Quick Start Guide
1 x Warranty Card

System Requirements

Console:

HDMI monitor
Standard wired USB keyboard
Standard 2 or 3 button wired USB mouse

Computer:

HDMI port
USB Type-A port

Operating Systems:

Windows® 7, 8.1, 10, 11
Mac OS 9.0+
Linux®, UNIX®, and other USB supported systems

The Adopted Trademarks HDMI, HDMI High Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Overview

A. Port LEDs
B. USB port for keyboard and mouse
C. HDMI output port
D. Remote port selector
E. USB Type-A connection (Port 1)
F. HDMI in (Port 1)
G. HDMI in (Port 2)
H. USB Type-A connection (Port 2)

Hardware Installation

Connect your keyboard and mouse to the unit’s USB keyboard and mouse consoles ports.
Connect an HDMI-enabled monitor to the unit’s HDMI output port.
Connect the USB Type-A and HDMI in connectors of the attached KVM cables into their respective ports on your ﬁrst and second computers.
Position the remote port selector within a reach distance on your desktop.
Power on both computers. Upon power-up the KVM will default to port1.

Press the remote port selector to switch KVM control between the two computers. The port LED for the selected port lights green.

Limited Warranty

This product carries a 3 Year Limited or Lifetime Warranty.
For the terms and conditions of this warranty, please go to
https://www.iogear.com/support/warranty
Register online at https://www.iogear.com/register
Important Product Information
Product Model
Serial Number

Contact

WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:

Visit www.iogear.com for more product information
Visit www.iogear.com/support for live help and product support

IOGEAR
iogear.custhelp.com
support@iogear.com
www.iogear.com

EMC Information

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital service, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help

FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

CE Statement:
This device has been tested and found to comply with the following European Union directives: Electromagnetic Capability (2014/30/EU) and Low Voltage (2006/95/EC).