LAP TP22-R-CCT Square 600mm x 600mm LED Remote Controlled Panel Light Instruction Manual

LAP TP22-R-CCT Square 600mm x 600mm LED Remote Controlled Panel Light

Product Information

• KNG: KNG-1758-0006
• EAN: 5063022046369
• Impala Ref: PRJ26533
• Page Size: A3
• LED Panel Light

Specifications

• Supply voltage: 220-240 V~, 50 Hz
• Bulb Type: LED (50 W)
• Battery: 1 x 3.0 V (CR2025)
• Frequency range: 2402 MHz
• Transmitter power: 9.33 dBm
• Class: Class II product – Double Insulated – No earth required

Product Usage Instructions

Safety

• Keep out of reach of children.
• Read through the instructions thoroughly prior to installation and retain them for future reference.
• Use the screws and wall plugs supplied for installation, which are suitable for masonry only. Other fixings must be purchased separately.

Battery Safety
If the button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

• Ensure there is no electricity failure.
• Ensure all the connections are secured.
• Maintain the surface condition well.

Important Notes

• Do not stare at the operating light source.
• Do not use the product with a dimmer switch.

Guarantee

• This product has a manufacturer’s guarantee of 5 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost for normal household use.
• This guarantee covers product failures and malfunctions provided the product was used for the purpose for which it is intended and subject to installation, cleaning, care, and maintenance in accordance with the information contained in the user manual and standard practice, provided that standard practice does not conflict with the user manual.

FAQ

• Q: Can this product be used outdoors?
  A: No, this product is for indoor use only.

• Q: How should I dispose of this product?
  A: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.

IMPORTANT – These instructions are for your safety. Please read through them thoroughly prior to handling the product and retain them for future reference.

Parts

You will need

Care & maintenance

Safety

IMPORTANT Do not use with a dimmer switch.
IMPORTANT, Retain for future reference: read carefully.

• These instructions are for your safety. Please read through them thoroughly prior to installation and retain them for future reference.
• All fittings must be installed by a competent person in accordance with local regulations (IET wiring regulation BS7671).
• Check the pack and make sure you have all of the parts listed.
• Remove all packaging, wrap etc from the product.
• Decide on the appropriate location for your product.
• This product is suitable for indoor use only and not for areas constantly subject to moisture such as bathroom.
• Always refer to the installation drawing for the orientation of the product.
• The product must be securely fixed to the mounting surface using the screws and wall plugs supplied. The screws and wall plugs supplied are suitable for “masonry” only. Other fixings not supplied and must be purchased.
• Take care not to drill into any pipes or mains cables beneath the surface during mounting holes preparation.
• IMPORTANT : The fixing point(s) selected must be capable of supporting the full weight of the light fitting.
• Wiring diagram is for reference only. Always refer to the terminal marking for wiring. Ensure that all electrical connections are tight and that no loose strands are left out of the terminal block.
• Never put anything on the product or hang anything on any part of this product.
• Never use the terminal cables to bear the product weight.
• Do not ingest battery, Chemical Burn Hazard.
• The remote control supplied with a coin/button cell battery.If the coin /button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• BATTERY WARNING: KEEP OUT OF REACH OF CHILDREN
• Store spare batteries securely. Dispose of used batteries immediately and safely. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• If the battery compartment does not close securely, stop using the product and keep it away from children.
• Be alert, there are no obvious symptoms if a child has swallowed a button or coin battery. If your child appears unwell and there are no obvious symptoms, then check to make sure there are no batteries missing from any items they have been around. If you suspect they have swallowed a coin/button cell, then seek medical attention. Similarly, if they vomit bright red fresh blood seek immediate medical help.
• Always remain vigilant with discharged or spare button or coin batteries in the home and in products that contain them
• Non-replaceable control gear.
• When the product does not light after installation:
  • Ensure there is no electricity failure
  • Ensure all the connections are secured
• If you have any doubt about installation/use of this product, consult a qualified electrician.
• Always disconnect the product from mains at least 10 minutes allowing to cool down before any maintenance or adjustment.
• It is recommended to have a regular schedule of care and maintenance to keep the surface condition well.

Technical Data

Guarantee

• We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product has a manufacturer’s guarantee of 5 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost for normal (non-professional or commercial) household use.

• To make a claim under this guarantee, you must present your proof of purchase (such as a sales receipt, purchase invoice or other evidence admissible under applicable law), please keep your proof of purchase
  in a safe place. For this guarantee to apply, the product you purchased must be new, it will not apply to second hand or display products. Unless stated otherwise by applicable law, any replacement product issued under this guarantee will only be guaranteed until expiry of the original period guarantee period.

• This guarantee covers product failures and malfunctions provided the product was used for the purpose for which it is intended and subject to installation, cleaning, care and maintenance in accordance with the information contained in these terms and conditions, in the user manual and standard practice, provided that standard practice does not conflict with the user manual.

• This guarantee does not cover defects and damage caused by normal wear and tear or damage that could be the result of improper use, faulty installation or assembly, neglect, accident, misuse, or modification of the product. Unless stated otherwise by applicable law, this guarantee will not cover, in any case, ancillary costs (shipping, movement, costs of uninstalling and reinstalling, labour etc), or direct and indirect damage.

• If the product is defective, we will replace or refund, within a reasonable time.

• Rights under this guarantee are enforceable in the country in which you purchased this product. Guarantee related queries should be addressed to the store you purchased this product from.

• The guarantee is in addition to and does not affect your statutory rights.

Declaration of Conformity

(UK) DECLARATION OF CONFORMITY

Product

• BERTELIN LEDPAN WH 60×60 CCTDIM remote/ WUNDT LEDPAN WH 60×60 CCTDIM remote/ LED Panel light CCT dimmable by remote 60×60
• TP22-R-CCT/ TP22-R-CCT/ TP22-R-CCT

Name and address of the manufacturer or his authorised representative:
Kingfisher International Products Limited 1 Paddington Square

• London W2 1GG
• United Kingdom

This declaration of conformity is issued under the sole responsibility of the manufacturer.
Object of the declaration
Product| Model| EAN
BERTELIN LEDPAN WH 60×60 CCTDIM remote/ WUNDT LEDPAN WH 60×60 CCTDIM remote/

LED Panel light CCT dimmable by remote 60×60

| TP22-R-CCT/ TP22-R-CCT/ TP22-R-CCT|

• 5063022046376/
• 5063022046369/
• 5063022056849

The object of the declaration described above is in conformity with the relevant legislation:
Radio Equipment Regulations 2017 as amended

• The Restriction of the use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 as amended
• The Ecodesign for Energy-Related Products and Energy Information Regulations 2021 Electrical Equipment (Safety) Regulation 2016 as amended
• Electromagnetic Compatibility Regulations 2016 as amended

References to the relevant designated standards used or references to the other technical specifications in relation to which conformity is declared:
2011/65/EU~ EN62717

• EN 62722
• BS EN IEC 60598-1:2021 BS EN 60598-2-2:2012 BS EN IEC 60598-2-1:2021 EN 62493:2015
• EN IEC 62031:2020
• EN 61347-1: 2015+A1:2021 & EN 61347-2-13: 2014+A1:2017 EN 62471:2008
• IEC/TR 62778:2014
• BS EN IEC 62368-1:2020+A11:2020 EN 50663:2017/ BS EN 50663:2017 EN 62479:2010/ BS EN 62479:201 ETSI EN 300 440 V2.2.1 (2018-07)
• ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-3 V2.1.1 (2019-03)
• EN 50665:2017
• BS EN IEC 55015:2019+A11:2020
• BS EN 61547:2009 EN IEC 61000-3-2:2019+A1:2021/
• BS EN IEC 61000-3-2:2019+A1:2021 EN 61000-3-3:2013+A1:2019+A2:2021/ IEC/TR 62778

Where applicable, the approved body Bureau Veritas Consumer Products Services, Inc. (AB2200) performed Radio Equipment Directive and issued the certificate: CS35703.
Signed for and on behalf of:

Kingfisher International Products Limited 1 Paddington Square

• London W2 1GG
• United Kingdom
• David Awe
• Group Quality Director 5/3/2022

| 2014/30/UE, astfel a fost modificată Directiva privind compatibilitatea electromagnetică Directiva

2014/35/EU Directiva Seguridad Eléctrica:

|
---|---|---

(EN) EU DECLARATION OF CONFORMITY

| |
References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared:|
Product|

• BERTELIN LEDPAN WH 60×60 CCTDIM remote/ WUNDT LEDPAN WH 60×60 CCTDIM remote/ LED Panel light CCT dimmable by remote 60×60
• TP22-R-CCT/ TP22-R-CCT/ TP22-R-CCT

|
Name and address of the manufacturer or his authorised representative:|
Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands|
2011/65/EU~ EN62717

• EN 62722
• EN 62493:2015
• EN IEC 62031:2020
• EN 61347-1: 2015+A1:2021 & EN 61347-2-13: 2014+A1:2017 EN 62471:2008
• IEC/TR 62778:2014
• EN IEC 62368-1:2020+A11:2020 ETSI EN 300 440 V2.2.1 (2018-07)
• ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-3 V2.1.1 (2019-03)
• EN 50665:2017
• EN IEC 62311:2020
• EN IEC 55015:2019+A11:2020/ EN 61547:2009
• EN IEC 61000-3-2:2019+A1:2021 EN 61000-3-3:2013+A1:2019+A2:2021 EN IEC 60598-1:2021 EN 60598-2-2:2012
• EN IEC 60598-2-1:2021 2014/53/EU

|
This declaration of conformity is issued under the sole responsibility of the manufacturer|
Object of the declaration/|
Product/Produit/Produkt/Produsul/Producto/ Produto| Model/Modèle/Model/ Modelul/Modelo/Modelo| EAN|
BERTELIN LEDPAN WH 60×60 CCTDIM remote/ WUNDT LEDPAN WH 60×60 CCTDIM remote/

LED Panel light CCT dimmable by remote 60×60

| TP22-R-CCT/ TP22-R-CCT/ TP22-R-CCT| 5063022046376/

5063022046369/

5063022056849

|
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:|
Where applicable, the approved body Bureau Veritas Consumer Products Services, Inc. (NB2200) performed Radio Equipment Directive and issued the certificate: CS35702.|

• 2014/53/EU as amended Radio Equipment Directive
• 2011/65/EC as amended Directive RoHS Restriction of the use of certain hazardous substances in electrical and electronic equipment
• 2009/125/EC as amended Directive on Ecodesign Requirements for Energy-Related Products
• 2014/30/EU as amended     Directive Electromagnetic compatibility 2014/35/EU Directive Electrical Safety:

|
Where applicable, description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the EU declaration of conformity:|
Signed for and on behalf of

• Kingfisher International Products B.V., Rapenburgerstraat 175E,
• 1011 VM Amsterdam, The Netherlands
• David Awe
• Group Quality Director 5/3/2023

|
|

Manufacturer • Fabricant • Producent • Producător • Fabricante UK Manufacturer:
Kingfisher International Products Limited,

• 1 Paddington Square, London, W2 1GG,
• United Kingdom
• EU Manufacturer:
• Kingfisher International Products B.V. Rapenburgerstraat 175E, 1011 VM Amsterdam
• The Netherlands

 www.diy.com /www.screwfix.com /www.screwfix.ie To view instruction manuals online, visit www.kingfisher.com/products Made in China

Installation

IMPORTANT DO NOT USE WITH A DIMMER SWITCH. IMPORTANT! RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

Use

ON/OFF

Pairing: Press and hold the “Group 1/2” button for 2 seconds or more, within 10 seconds from the lamps powering ON. If the lamps flash, lamps in Group 1/2 are successfully paired.

Maintenance

References

• Brico Depôt | Bricolaje, jardín, construcción y climatización
• Brico Depôt | Bricolage, construção, jardim e climatização
• Bricolage, jardinage et aménagement de la maison | Castorama
• B&Q | DIY Products at Everyday Low Prices | DIY at B&Q
• KoçtaÅŸ | Evimi Çok Seviyorum

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>