EdenDirect DEHA121212 3 Speed White True HEPA Air Purifier User Manual
- June 16, 2024
- EDENDIRECT
Table of Contents
- READ AND SAVE THESE INSTRUCTIONS
- CAUTION
- PRODUCT STRUCTURE
- SPECIFICATION
- ATTENTION
- OPERATION GUIDE
- BELOW MENTIONED IS THE PM2.5 INDICATION
- FILTER REPLACEMENT REMINDER
- HOW TO CLEAN SENSOR
- CLEAN/ REPLACE FILTERS
- CLEAN / REPLACE FILTERS
- MAINTENANCE GUIDE
- EXTERNAL CLEANING
- TROUBLE SHOOTING
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EdenDirect DEHA121212 3 Speed White True HEPA Air Purifier User Manual
CUSTOMER SERVICE
Our customer service team is standing by to assist you
if you have any questions or concerns.
? www.mookashops.com
? support@mookashops.com
? l-855-666-9955
m.me/MookaUS
READ AND SAVE THESE INSTRUCTIONS
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
WARNING
To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any
Solid-State Speed Control Device
CAUTION
-
Please don’t use if the cable or plug is broken. Don’t touch with wet hand. It may cause fire hazard and risk of shock.
-
Switch it off and unplug it when moving the unit.
-
Unplug the unit when not in use for a long time.
-
Stop using the product if you find any odour emanating from the unit and contact after-sales service immediately.
-
Place the unit at least 50mm away from the the wall or any obstacle.
-
If the cable is damaged, contact after-sales service immediately.
-
Please don’t spray any paint, pesticide, alcohol or any chemical on the unit. Otherwise it may cause crack on unit, risk of shock and fire hazard.
-
Don’t use the unit in flammable and corrosive environment.
-
When the unit is working, please don’t touch the air inlet or air outlet.
-
To prevent bodily injuries or damage to the unit, don’t insert your hand into the air inlet/outlet.
-
Please don’t use the unit in the bathroom or any moist environment.
It may cause fire hazard and carry a risk of shock. -
Don’t improperly modify, disassemble, attempt to repair the unit. It may cause fire hazard and carry a risk of shock.
PRODUCT STRUCTURE
- Control Panel
- Front Panel
- 3 Stage True Hl3 HEPA Filter
- Sensor
- Air Outlet
- Power Cord
SPECIFICATION
ATTENTION
Please remove the PE bag before the first time you use it.
OPERATION GUIDE
BELOW MENTIONED IS THE PM2.5 INDICATION
FILTER REPLACEMENT REMINDER
HOW TO CLEAN SENSOR
Please unplug the air purifier before cleaning.
-Open the dust cover on the back of the air purifier and use a clean soft cloth to clean the sensor.
-Never use water, alcohol, gasoline, benzene and any other liquid to clean the sensor. Otherwise, it would cause damage to the sensor.
CLEAN/ REPLACE FILTERS
Please follow the instructions below
As shown in Fig A below: hold the two sides of the unit, pull out the front
panel and lift it.
As shown in Fig C: pull down the strap on the filter to take out HEPA
activated carbon filter. As shown in drag ram.
Please hold the middle of the front panel with both hands to install it as
shown in Fig D.
CLEAN / REPLACE FILTERS
Newly upgraded multi-layer filter system with a removable filter in front
- After taking out the filter element, remove the Pre-filter (Black sponge)
- Clean with water, then dry it
- Reinstall the Pre-filter to the filter element
- Installed the filter into the air purifier and start working.
MAINTENANCE GUIDE
-To avoid vibration, noise during working and to prevent the risk of shock, place the unit on an even surface.
-To prevent damage, do not put any objects inside the unit.
When not in use for an extended period, unplug it and keep it away from
children. To achieve better purification results, place the purifier unit in
an open area and refrain from blocking the air inlet and outlet of unit.
-To extend the life of unit, please ensure regular maintenance.
Before taking out the filter, please switch off the unit and unplug it.
After prolonged use, if the filters need to be replaced, the filter change
indicator on the control panel flashes. This is a reminder
to the user to replace it with a new filter.
EXTERNAL CLEANING
Before external cleaning of the unit, please disconnect from the power source.
-Use a soft and clean cloth.
-Do not use alcohol, gasoline, benzol and other chemical cleaner.
TROUBLE SHOOTING
? www.mookashops.com
? support@mookashops.com
? l-855-666-9955
m.me/MookaUS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>