soundcore Life Dot 2 NC True Wireless Earbuds User Guide
- June 5, 2024
- Soundcore
Table of Contents
soundcore Life Dot 2 NC True Wireless Earbuds
SUPPORT
For FAQs, detailed user manual and more information, please visit www.soundcore.com/support
APP
Download the Soundcore App to customize the user interface (e.g. adjust
volume, control playback, activate Siri), adjust EQ, switch ANC modes, update
firmware, and explore more.
AMBIENT SOUND
Switch ANC/Transparency/Normal modes in the Soundcore App. ANC (Active Noise
Cancellation): Reduce unwanted background noise. Transparency: Stay aware of
surroundings while listening to music.
WEARING
Choose the EarTips and EarWings that fit your ears best.
CHARGING
Fully dry off the earbuds and the USB-C charging port before charging. Use a certified USB-C charging cable to prevent any damage.
POWERING ON/OFF
Open the charging case, the earbuds will automatically power on. To power off, place the earbuds into the charging case and close the case.
PAIRING
Open the charging case, the earbuds will automatically enter the Bluetooth
pairing mode. Select Soundcore Life Dot 2 NC” on your device’s Bluetooth list
to connect.
CONTROLS
- x1: Tap once x2: Tap twice 2: Press and hold for 2 seconds
RE PAIRING
Pairing with another device: Place the earbuds into the charging case and keep it open. Press and hold the button on the case for 3 seconds until the earbud LED indicators flash white to enter pairing mode.
RESET
Reset if the earbuds cannot properly pair with each other or with other devices. Place the earbuds into the charging case and keep it open. Press and hold the button on the case for 10 seconds until the earbud LED indicators flash red 3 times and then turn white.
LED LIGHT GUIDE
- Steady white
- Flashing white
- Flashing red
References
- soundcore Headphones & Speakers - Hear it, Feel it - soundcore US
- Anker (アンカー) Japan 公式オンラインストア – Anker Japan 公式オンラインストア
- Soundcore EN