Taylor T-6020A Belt Sander Instructions
- June 16, 2024
- TAYLOR
Table of Contents
T-6020A
BELT SANDER 3/4” X 20-1/2”
T-6020A Belt Sander
OILING
INSTRUCTIONS: OIL AFTER EACH USE WITH A FEW DROPS OF AIRTOOL OIL THROUGH THE
AIR INLET. RUN FOR 1 SECOND TO COAT ALL INTERNAL PARTS.
USE 90 PSI MAXIMUM
REF #| PART #| DESCRIPTION| QTY| | ** _REF
_| PART #| DESCRIPTION| QTY**
---|---|---|---|---|---|---|---|---
1A| 6020A01A| IDLER PULLEY BRACKET| 1| 18| 6020A18| HOUSING| 1
1B| 6020A01B| SET SCREW| 1| 19| 6020A19| BEARING| 1
1C| 6020A01C| SCREW| 1| 20| 6020A20| END PLATE| 1
1D| 6020A01D| C-CLIP| 1| 21| 6020A21| SPACER| 1
2A| 6020A02A| IDLER PULLEY (No bearing or spacer)| 1| 22| 6020A22| KEY| 1
2B| 6020A02B| SPACER| 1| 23| 6020A23| CAP| 1
2C| 6020A02C| BEARING| 2| 24| 6020A24| BEARING| 1
3| 6020A03| SPRING| 1| 25| 6020A25| END PLATE| 1
4| 6020A04| FINGER PAD| 1| 26| 6020A26| CYLINDER| 1
5| 6020A05| BOLT & WASHER| 1| 27| 6020A27| ROTOR BLADES (SET OF 5)| 1set
6| 6020A06| SOCKET HEAD BOLT| 1| 28| 6020A28| ROTOR| 1
7| T-702080| 80 GRIT BELT| 1| 29| 6020A29| THROTTLE LEVER| 1
| T-7020100| 100 GRIT BELT| 1| 30| 6020A30| LEVER PIN| 1
8| 6020A08| SOCKET HEAD BOLT| 1| 31| 6020A31| VALVE BODY| 1
8A| 6020A08A| WASHER| 1| 32| 6020A32| O-RING| 1
9| 6020A09| DRIVE PULLEY| 1| 33| 6020A33| O-RING| 1
10| 6020A10| SHOE| 1| 34| 6020A34| O-RING| 1
11| 6020A11| SOCKET HEAD BOLT| 1| 35| 6020A35| VALVE STEM| 1
12| 6020A12| DUST FLAP| 1| 36| 6020A36| O-RING| 1
13| 6020A13| GUARD BODY| 1| 37| 6020A37| VALVE SPRING| 1
14| 6020A14| TENSION BAR| 1| 38| 6020A38| DEFLECTOR| 1
15| 6020A15| SPRING| 1| 39| 6020A39| AIR INLET| 1
16| 6020A16| LEVER PIN| 1| 40| 6020A40| WRENCH| 1
17| 6020A17| LEVER PIN| 1| 41| 6020A41| O-RING| 1
| | | | 42| 6020A42| FILTER| 1
505 N. Railroad Ave. 33435
P.O. Box 1117 33425
Boynton Beach, FL
FOR WARRANTY INFORMATION &
WARRANTY REGISTRATION VISIT
www.taylorpneumatic.com
05/23 / ALL RIGHTS RESERVED / COPYRIGHT 2023
Ph. (561)732-1111
Fax. (561)731-4412
Toll Free800-805-8665