ASUS P306 TUF Gaming M4 Wireless Mouse User Guide

ASUS P306 TUF Gaming M4 Wireless Mouse

Package Contents

Specifications

Mouse features

1. Left-click button
2. Scroll wheel
3. Right-click button
4. DPI Indicator / DPI  / DPI
5. DPI button / DPI  / DPI
6. Forward button
7. Backward button
8. Mouse feet
9. Optical sensor
10. Connection mode switch

Installing the battery

Removing the battery

Removing the USB Dongle

Replacing the USB Dongle

Connecting your gaming mouse

Setting up your gaming mouse as a Bluetooth wireless mouse

1. Set the connection switch to the Bluetooth mode.

NOTE: Only follow step 2  when pairing your gaming mouse to a different device

2. Press and hold the Left-click button, Right-click button and DPI button for 3 seconds until the DPI indicator LED blinks blue.
3. The DPI indicator LED will light up blue for 5 seconds then switch back to the original lighting effect after successfully pairing.

NOTE: If you are pairing Bluetooth for the first time and fails after 1 minute, the DPI indicator LED lights up red for 5 seconds then reverts back to the original lighting effect.

Setting up your gaming mouse as a RF wireless mouse

1. Connect the USB dongle to a USB port on your computer
2. Set the connection switch to the RF 2.4G Wireless mode.

Updating the firmware and customization

1. Connect the USB dongle to a USB port, and set your gaming mouse to the RF 2.4G Wireless mode.
2. Download and install the Armoury Crate from https://www.asus.com/supportonly/Armoury%20Crate/HelpDeskDownload/
3. Follow the software instructions to update your gaming mouse and dongle’s firmware.
4. Customize your gaming mouse using Armoury Crate.

Battery Status

The DPl indicator LED will blink red when the battery power is below 20%, and continue until the battery power is depleted.

Safety Guidelines

Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C(32°F) to 40°C(104°F). When the device exceeds the maximum temperature, unplug or switch off the device to let it cool down.

Notices

Limitation of Liability

• Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.
• ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.
• This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
• UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.

Federal Communications Commission Statement

• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  • This device may not cause harmful interference.
  • This device must accept any interference received including interference that may cause undesired operation.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    CAUTION! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

RF Exposure Warning

The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

Proper disposal

• DO NOT throw the device in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
• DO NOT throw the device in fire. DO NOT short circuit the contacts.
• DO NOT disassemble the device.

CE Mark Warning

ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support

ABOUT COMPANY

• Manufacturer ASUSTek COMPUTER INC.
• Address, City 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan
• Authorized Representative in Europe ASUS COMPUTER GmbH
• Address Harkortstrasse 21-23, 40880 Ratingen
• Country Germany
• Authorized Representative in United Kingdom ASUSTEK (UK) LIMITED
• Address 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL,
• England
• Country United Kingdom

References

• ASUS Global
• Официальная служба поддержки | ASUS России
• Official Support | ASUS Global
• Armoury Crate - Support
• ASUS в СНГ
• Official Support | ROG Global
• Official Support | ASUS Global

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>