MARTEC Lighting Vancouver LED Wall Light Installation Guide
- June 9, 2024
- MARTEC Lighting
Table of Contents
MARTEC Lighting Vancouver LED Wall Light
We strongly recommend that you read this manual carefully before installation.
Installation MUST be carried out by a qualified and licensed electrician.
Models Parameters
MLXVE27FSM 60W IP44 Exterior Wall Light (E27 lampholder)
Installation Instructions
Steps
-
Switch off the mains.
-
Unscrew and remove the mounting bracket using the allen key supplied.
-
Mount the bracket on the desired surface using the screws supplied.
-
Wire to main as illustrated.
-
Scew E27 lamp into the lamp holder.
(lamp not included) -
Attach fitting back onto the bracket using the allen key supplied.
-
Switch on the mains.
Accessories Included
Data Table
Models| Power (W)| PF| CCT (K)| Weight (KG)|
Operation Temperature (Degree)| IP
---|---|---|---|---|---|---
MLXVE27FSM| 60| ≧0.5| N/A| 0.75| +40° -20°| 44
WARNING
- Installation of product MUST follow SAA standards and meet local authority regulations.
- Installation MUST be carried out by a qualified and licensed electrician.
- Light MUST be earthed.
- Light MUST be firmly installed to a flat solid surface, wall or ceiling.
- DO NOT immerse any part of the light fitting into water or any form of liquid.
- DO NOT look directly into the LED light.
- The warranty is VOID if product is not installed according to this installation guide.
2 Year Replacement Warranty
Visit our website for details https://www.martecaustralia.com.au/warranty- statement/
E: [email protected] | P: 02 8778 7500
www.martecaustralia.com.au