Hanwha Vision SBL-100D Lens Module Mount Installation Guide
- June 16, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SBL-100D Lens Module Mount
Product Information
Product Name: Lens Module Mount SBL-100D
Package: Lens Module Mount, Manual, Torx L wrench, Installation screw
Product Overview: The ENG SBL-100D is a mount used to install a lens
module (SLA-T2480/ SLA-T4680) to the ceiling or wall.
Languages:
- GER: SBL-100D ist eine Befestigung zur Montage eines
- Objektivmoduls (SLA-T2480/SLA-T4680) an einer Decke oder Wand.
- RUS: SBL-100D – (SLA-T2480/SLA-T4680).
- POL: SBL-100D to uchwyt slucy do instalacji modulu obiektywu (SLA-T2480/SLA-T4680) do sufitu lub ciany.
- JAP: SBL-100D(SLA-T2480/SLA-T4680)
- CHI: SBL-100DSLA-T2480/SLA-T4680
- KOR: SBL-100D (SLA-T2480/SLA-T4680)
Specifications
- Mount Type: Ceiling or wall mount
- Compatible Lens Module: SLA-T2480/SLA-T4680
Installation Precautions
When installing this product, it is recommended to use the installation screws
shipped with this product, and be cautious not to damage the product with too
much force when assembling the product.
Product Usage Instructions
Installation
- Use the torx L wrench provided as an accessory to remove the 2 fastening bolts from the top cover by turning them counterclockwise, and remove the mount.
- Make sure the screw holes for mounting to the ceiling are visible.
- Plug the lens module separately purchased in the holder.
- Use the 2 installation screws provided as accessories to fix the bottom cover. Although there are 4 screw holes for mounting to the ceiling, you might have to use only 2 depending on the surveillance angle.
- Use the torx L wrench to assemble the top cover. Make sure it aligns with the screw holes for mounting the cover.
- Adjust pan/tilt to set it to a desired angle.
Diagram
FAQ
Q: Can I use different screws for installation?
A: It is recommended to use the installation screws provided with the
product to ensure proper installation and avoid damage.
Q: How many screw holes should I use for mounting to the ceiling?
A: Depending on the surveillance angle, you may need to use only 2 of the
4 screw holes provided for mounting to the ceiling.
Package
Product Overview
SBL-100D is a mount used to install a lens module (SLA-T2480/SLA-T4680) to the ceiling or wall.
Installation Precautions
When installing this product, it is recommended to use the installation screws shipped with this product, and be cautious not to damage the product with too much force when assembling the product.
Installation
- Use the torx L wrench provided as an accessory to remove the 2 fastening bolts from the top cover by turning them counterclockwise, and remove the mount.
- Make sure the screw holes for mounting to ceiling are visible.
- Plug the lens module separately purchased in the holder.
- Use the 2 installation screws provided as accessories to fix the bottom cover.
- Although there are 4 screw holes for mounting to ceiling, you might have to use only 2 depending on the surveillance angle.
- Use the torx L wrench to assemble the top cover.
- Make sure it aligns with the screw holes for mounting the cover.
- Adjust pan/tilt to set it to a desired angle.