Taylor T-6446 Palm Grip Sanders Installation Guide
- June 16, 2024
- TAYLOR
Table of Contents
T-6445 & T-6446
5” or 6” PALM GRIP SANDERS
(3/16” Orbit)
T-6446 Palm Grip Sanders
OILING INSTRUCTIONS:
OIL AFTER EACH USE WITH A FEW DROPS OF AIRTOOL OIL THROUGH THE AIR INLET.
RUN FOR 1 SECOND TO COAT ALL INTERNAL PARTS.
USE 90 PSI MAXIMUM
REF # | PART # | DESCRIPTION | QTY |
---|---|---|---|
1 | 644501 | HOUSING | 1 |
2 | 644502 | HOUSING GRIP | 1 |
3 | 644503 | PIN | 1 |
4 | 644504 | LEVER | 1 |
5 | 644505 | THROTTLE BODY | 1 |
6 | 644506 | O-RING | 2 |
7 | 644507 | VALVE STEM | 1 |
8 | 644508 | O-RING | 1 |
9 | 644509 | SPRING | 1 |
10 | 644510 | REGULATOR KNOB | 1 |
11 | 644511 | O-RING | 2 |
12 | 644512 | AIR INLET | 1 |
13 | 644513 | BALL | 1 |
14 | 644514 | SPRING | 1 |
15 | 644515 | RETAINING RING | 1 |
16 | 644516 | PIN | 1 |
17 | 644517 | BEARING | 2 |
18 | 644518 | BACK END PLATE | 1 |
19 | 644519 | PIN | 3 |
20 | 644520 | ROTOR BLADES (SET OF 5) | 1set |
21 | 644521 | ROTOR | 1 |
22 | 644522 | O-RING | 1 |
23 | 644523 | CYLINDER | 1 |
--- | --- | --- | --- |
24 | 644524 | FRONT END PLATE | 1 |
25 | 644525 | RETAINING RING | 1 |
26 | 644526 | KEY | 1 |
27 | 644527 | COUNTERBALANCE 3/16” | 1 |
28 | 644528 | BEARING | 2 |
29 | 644529 | WASHER | 1 |
30 | 644530 | RETAINING RING | 1 |
31 | 644531 | SPINDLE | 1 |
32 | 644532 | SCREW | 4 |
33 | 644533 | REAR GASKET | 1 |
34 | 644534 | REAR COVER | 1 |
35 | 644535 | SHROUD | 1 |
36 | 644536 | SCREW | 1 |
37 | 644537 | MUFFLER | 1 |
38 | T-6415 | PAD 5” | 1 |
T-6416 | PAD 6” | 1 | |
39 | 644539 | WRENCH | 1 |
40 | 644540 | ADAPTER | 1 |
OPTIONAL ACCESSORIES | |||
T-6415V | Pad 5” Velcro | ||
T-6416V | Pad 6” Velcro |
505 N. Railroad Ave. 33435
P.O. Box 1117 33425
Boynton Beach, FL
FOR WARRANTY INFORMATION & WARRANTY REGISTRATION VISIT
www.taylorpneumatic.com
05/23 / ALL RIGHTS RESERVED / COPYRIGHT 2023
Ph. (561)732-1111
Fax. (561)731-4412
Toll Free 800-805-8665
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>