BELLEZE 014-HG-41307-2 Carl Accent Table with Door User Manual

BELLEZE 014-HG-41307-2 Carl Accent Table with Door

Product Information

• Product Name:
  • Carl Accent Table with Door
• Product Code:
  • 014-HG-41307-2
• Weight Limitations:
  • Maximum Load: 50 lb
  • Maximum Load (Door): 20 lb
  • Estimated Assembly Time: 90 mins

Product Usage Instructions

• Before Assembly
  • Assemble the furniture on an empty carton, carpet, or rug to prevent scratches or damage.
  • Keep pets and children away from the assembly area for safety.
  • Ensure the product is fully assembled before use. If any hardware or products are missing, do not use it until the missing parts are restored.
  • This furniture requires 2 people for assembly.
  • Before assembly, read the instruction manual to familiarize yourself with the various steps.
  • Check that no parts are missing or damaged before assembly. Do not destroy or discard any packaging until you have all the necessary parts.
  • Hand-tighten all hardware and be careful not to over-tighten to avoid damaging the product.
  • CAUTION: There are small components used in the construction of this product. Keep loose items away from pets and children to avoid a choking hazard.
• Package Contents

• Required Tools for Assembly (Not included)
  • A screwdriver and an Allen wrench are required for assembly.
• Assembly Instructions
  • Attach cam bolts to the side panels (3, 4).
  • Attach door stopper to the storage panel (5).
  • Assemble the storage panel (5) between the side panels (3, 4).
  • Slide in the lower back panel (11) and insert wood dowels to the side panels (3, 4).
  • Assemble the bottom panel (2) to the side panels (3, 4).
  • Attach stud bolts to the legs (8, 9).
  • Attach the short base panel (7) between the legs (8, 9). Then attach protective pads to the legs.
  • Assemble the long base panels (6) between the leg assemblies.
  • Insert large wood dowels into the bottom panel (2).
  • Assemble the base to the bottom panel.
  • Put the table assembly in its upright position. Slide in the upper back panel (10) and insert wood dowels to the side panels.
  • Attach cam bolts to the top panel (1).
  • Assemble the top panel (1) on top of the table assembly.
  • Attach the power strip to the top panel (1).
• FAQ
  • Q: What is the weight limit for this accent table?
  • A: The maximum load capacity for this accent table is 50 lb. However, the maximum load for the cabinet door is 20 lb.
  • Q: How long does it take to assemble the table?
  • A: The estimated assembly time is 90 minutes.
  • Q: Are the required tools included in the package?
  • A: No, the required tools (screwdriver and Allen wrench) are not included. You will need to provide them separately.

Estimated Time For Assembly

• Estimated time for assembly: 90 mins
• Weight limitations are as follows:
• Assemble the furniture on an empty carton, carpet, or rug to prevent scratches or damage.
• For safety, please keep pets and children away from the assembly area.
• Ensure the product is fully assembled before use. If you are missing any hardware or products, do not use it until you have restored the missing parts.
• This furniture requires 2 people for assembly.
• Read this instruction manual before assembly to familiarize yourself with the various steps.
• Lay out all components and hardware separately on a flat surface and make sure that no parts are missing or damaged before assembly. Do not destroy or discard any packaging until you are certain that you have all the necessary parts for assembly.
• Hand-tight all hardware and be careful not to over-tighten to avoid damaging the product.

CAUTION

• There are small components used in the construction of this product.
• Loose items should be kept away from pets and children to avoid a choking hazard.
• Keep all plastic bags and packaging film away from pets and children to avoid suffocation.

PACKAGE CONTENTS

Required Tools

Required tools for assembly (Not included)

INSTALLATION INSREUCTION

1. Attach cam bolts to the side panels (3, 4).
2. Attach the door stopper to the storage panel (5).
3. Assemble the storage panel (5) between the side panels (3, 4).
4. Slide in the lower back panel (11) and insert wood dowels to the side panels (3, 4).
5. Assemble the bottom panel (2) to the side panels (3, 4).
6. Attach stud bolts to the legs (8, 9).
7. Attach short base panel (7) between the legs (8, 9). Then attach protective pads to the legs.
8. Assemble the long base panels (6) between the leg assemblies.
9. Insert large wood dowels to the bottom panel (2).
10. Assemble the base to the bottom panel.
11. Put the table assembly on its upright position. Slide in the upper back panel (10) and insert wood dowels to the side panels.
12. Attach cam bolts to the top panel (1).
13. Assemble the top panel (1) on top of the table assembly.
14. Attach power strip to the top panel (1).
15. Attach door hinges to the cabinet door.
16. Attach the cabinet door to the table.
17. Secure the back panels in place.

Warning

• Only place items on top of the product if they meet the recommended size and weight limits.
• Climbing on, stepping on, or placing overweighted objects on the product may cause property damage and/or injuries.
• Items placed on this product must be resting on a support surface without hanging over the edges.

FURNITURE CARE AND MAINTENANCE

Medium – Density Fiberboard

• Thank you for your purchase. We want your item to last as long as possible.
• To ensure the product gives you years of longevity, please follow the recommendations in this care and maintenance guide.

MAINTENANCE

• Tighten all bolts and screws again within the first 2 weeks of assembly.
• Check the tightness of all bolts every 2 months and tighten them if necessary.

CLEANING

• Clean the surface of the MDF (medium-density fiberboard) with a lightly dampened cloth.
• Arythl surface of mediately can cleanin’ i necessary.
• DO NOT use bleach or alcohol to clean the surface.
• DO NOT apply wood treatment on parts made with MDF.
• MDF will swell and distort when exposed to water damage. Make sure to dry the furniture immediately after cleaning.

WARNING

• The manufacturer and seller are not responsible for any liability relating to personal injury, property damage or losses, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification or neglect of this product.

© All copyright of this document belongs to BELLEZE. This document may at without writing Peterson om Be Leistibuted in whole or in 23

WARRANTY

BELLEZE products come with a 1-year warranty from the date of delivery. Register your product on our website to enjoy our limited lifetime warranty!

AFTER-SALE SERVICE

• Encounter any difficulties or missing parts?
• Contact us at 1-800-682-6376 or email us at support@belleze.com.
• We will send you a replacement.
• Hassle-free!
• No need to worry about repackaging and sending your item back.
• We hope you enjoy your new BELLEZE furniture!
• Share your photos on Instagram and tag us: @bellezefurniture.

FOLLOW US:

• @bellezefurniture

CONTACT INFO:

• support@belleze.com.
  1-800-682-6376

Scan this QR Code to view our online tutorial

• FOLLOW US: @bellezefurniture
• CONTACT INFO:
  • support@belleze.com.
  • 1-800-682-6376
• ITEM NO. 014-HG-41307-2
• The instruction booklet contains IMPORTANT safety information. Please read it in full and keep it for future reference.
• www.belleze.com.

References

• Affordable Modern Furniture | Shop Belleze Furniture Now

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>