BELLEZE 014-HG-41304-2 Set of 2 End Table with Rattan Drawer User Manual

BELLEZE 014-HG-41304-2 Set of 2 End Table with Rattan Drawer

Product Information

Carl End Table

ITEM NO. 014-HG-41304-2
Weight limitations are as follows:

• Maximum Load 50 lb
• Maximum Load 20 lb
• Maximum Load 10 lb

Specifications

• Estimated time for assembly: 120 mins

Product Usage Instructions

Before Assembly

1. Assemble the furniture on an empty carton, carpet, or rug to prevent scratches or damage.
2. For safety, please keep pets and children away from the assembly area.
3. Ensure the product is fully assembled before use. If you are missing any hardware or products, do not use it until you have restored the missing parts.
4. This furniture requires 2 people for assembly.
5. Read this instruction manual prior to assembly to familiarize yourself with the various steps.
6. Make sure that no parts are missing or damaged before  assembly. Do not destroy or discard any packaging until you are  certain that you have all the necessary parts for assembly.

Assembly Steps

• Step 1: Attach Cam Bolts to Side Panels
  Attach cam bolts to the side panels (3, 4).

• Step 2: Detach Drawer Slider from Slide Bracket
  Detach the drawer slider (G1) and (G2) from the slide bracket (G).

• Step 3: Attach Slide Brackets onto Side Panels
  Attach the slide brackets onto the side panels (3, 4).

• Step 4: Assemble Storage Panel
  Assemble the storage panel (5) between the side panels (3, 4).

• Step 5: Slide in Lower Back Panel
  Slide in the lower back panel (11) between the side panels (3, 4).

• Step 6: Assemble Bottom Panel
  Assemble the bottom panel (2) to the side panels.

• Step 7: Attach Legs and Base Panel
  Attach stud bolts to the legs (8, 9).
  Attach short base panel (7) between the legs (8, 9). Then attach protective pads to the legs.

• Step 8: Assemble Long Base Panels
  Assemble the long base panels (6) between the leg assemblies.

• Step 9: Insert Wood Dowels
  Insert large wood dowels to the bottom panel (2).
  Assemble the base to the bottom panel.
  Put the table assembly on its upright position. Slide in the upper back panel (10) and insert wood dowels to the side panels.

FAQ

• Q: What is the maximum weight limit for this end table?
  A: The maximum weight limit for this end table is 50 lb.

• Q: Can I assemble this end table by myself?
  A: No, this furniture requires 2 people for assembly.

• Q: What tools do I need for assembly?
  A: The required tools for assembly are not included. Please prepare the necessary tools separately.

CONTACT INFO:

[email protected]
1-800-682-6376

ITEM NO. 014-HG-41304-2
The instruction booklet contains IMPORTANT safety information. Please read it in full and keep it for future reference.
www.belleze.com

Scan this QR Code to view our online tutorial

Estimated time for assembly:

• 120 mins

Weight limitations are as follows

INSTRUCTION

• Assemble the furniture on an empty carton, carpet, or rug to prevent scratches or damage.
• For safety, please keep pets and children away from the assembly area.
• Ensure the product is fully assembled before use. If you are missing any hardware or products, do not use it until you have restored the missing parts.
• This furniture requires 2 people for assembly.
• Read this instruction manual prior to assembly to familiarize yourself with the  various steps. sure that no parts are missing or damaged before assembly. Do not destroy or discard any packaging until you are certain that you have all the necessary parts for assembly.
• Hand tight all hardwares and careful not to over tighten to avoid damaging the product.

CAUTION
There are small components used in the construction of this product. Loose items should be kept away from pets and children to avoid a choking hazard.
Keep all plastic bags and packaging film away from pets and children to avoid suffocation

**PACKAGE CONTENTS

**

**

**

Install all hardware perpendicular to the opening.

Required tools for assembly (Not included)

INSTALLATION INSTRUCTION

YOU’RE FINISHED!

Warning

• Only place items on top of the product if they meet the recommended size and weight limits.
• Climbing on, stepping on, or placing overweighted objects on the product may cause property damage and/or injuries.
• Items placed onto this product must be resting on a support surface without hanging over the edges.

FURNITURE CARE AND MAINTENANCE

Medium – Density Fiberboard

• Thank you for your purchase. We want your item to last as long as possible.
• To ensure the product gives you years of longevity, please follow the recommendations in this care and maintenance guide.

CLEANING

• Clean the surface of the MDF (medium-density fiberboard) with a lightly
• DO NOT use bleach or alcohol to clean the surface.
• DO NOT apply wood treatment on parts made with MDF.
• MDF will swell and distort when exposed to water damage. Make sure to dry the furniture immediately after cleaning.

WARNING

The manufacturer and seller are not responsible for any and all liability relating to personal injury, property damage or losses, whether direct, indirect, or incidental, resulting from the incorrect product.

© All copyright of this document belongs to BELLEZE .
This document may not be printed, translated, reproduced, or distributed in whole or in part without written permission from BELLEZE.

WARRANTY

BELLEZE products come with a 1-year warranty from the date of delivery. Register your product on our website to enjoy our limited lifetime warranty!

AFTER-SALE SERVICE

• Encounter any difficulties or missing parts?
• Contact us at 1-800-682-6376 or email us at [email protected]
• We will send you a replacement.
• Hassle-free!
• No need to worry about repackaging and sending your item back.
• We hope you enjoy your new BELLEZE furniture!

Share your photos on Instagram and tag us: @bellezefurniture.

References

• Affordable Modern Furniture | Shop Belleze Furniture Now

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>