Rraycom P2 Security Camera User Manual

Rraycom P2 Security Camera User Manual

Customer Service

Claim I-Year
Warranty for your device

If you have any after-sales questions please contact us

Dear valued customers,
Thank you for choosing Rraycom for your security needs. Please read the user manual carefully before using the wireless security camera.

If you encounter any issues, contact us with your order number for a fast solution within 24 hours. We understand setup issues may arise, but many can be resolved with proper settings.

Thank you for choosing Rraycom, we value your trust.

Best,
The Rraycom team

Design

1. Make sure your smartphone is connected to  the 2.4Ghz WiFi and the WiFi is visible.
2. Turn on the location service on  your smartphone.
3. Make sure the WiFi has 5Mbps  upload speed at least.
4. The camera only support 2.4Ghz WiFi.
5. Gently screw the bulb camera into the socket.

Note:
If you didn’t see your Home WiFi name  displayed on the page, you need to turn on the Location service of your smartphone.

Note:
If you didn’t see your Home WiFi name  displayed on the page, you need to turn on the Location service of your smartphone.

If the camera didn’t read the QR code, please see the troubleshootings below.

Note:
Please make sure there’s no glare on the smartphone display.
The camera won’t read the QR code
if there’s reflection.

Zink Connection

The Zink Connection method is a backup connection method. If the camera has difficulty scanning the QR code, we could connect the camera by following these steps.

If you want to watch live video on PC, just follow the steps below.

1. Go to https://user.sggsecurity.com/
2. Log in your 24H Cam account

Privacy Mode: Even if the privacy mode is activated, the security camera that has Onvif enabled will continue to capture and store video on the NVR.

Onvif: To integrate the bulb security camera into your current security camera setup, you can utilize the Onvif feature. You can add the camera to your system by entering its IP address, which can be found in the bulb security camera settings.

This device is compliant with part 15 of the FCC Rules and is subject to the following conditions: (1) it shall not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

It is important to note that this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, this equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

While there is no guarantee that interference will not occur in a particular installation, users who experience harmful interference are encouraged to try to correct it by reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, or connecting the equipment into an outlet on a circuit different from that to which the receiver is connected. If these measures do not resolve the issue, users should consult a dealer or an experienced radio/ TV technician for further assistance.

Additionally, this equipment complies with FCC Radiation exposure limits for an uncontrolled environment. Therefore, it should be installed and operated with a minimum distance of 20cm between the radiator and the user’s body.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>