Rraycom QW5 2K QHD Color Night Vision Security Cameras User Manual
- June 15, 2024
- RrAYCOM
Table of Contents
Rraycom QW5 2K QHD Color Night Vision Security Cameras
Product Information
Specifications
- Camera: 1
- Bracket: 1
- USB Cable: 1
- User manual: 1
- Mounting Kit: 1
Product Usage Instructions
Preparation
To prepare the camera for usage, follow these steps:
- Press and hold the power button until you hear the prompt, and the indicator light flashes blue slowly.
- Enable the location service on your smartphone.
- Connect your smartphone to your home Wi-Fi.
- Press and hold the reset button for about 3 seconds.
APP Download and Registration
To download the APP and register your account, follow these steps:
- Scan the QR code to download the APP. Or search for “O-KAM” in the app store (Google Play/App Store).
- Click “Register now” at the login interface.
- Select your address and enter your phone number to receive the verification code.
- After entering the verification code, set your password and click “Finish”.
Add Cameras
To add cameras to your account, follow these steps:
- Log in to the APP and click the “Add” button on the Home interface or click the “+” in the upper right corner.
- Scan the QR code on the camera at the QR code scanning interface.
- When you hear the prompt, the camera is ready for Wi-Fi configuration. Click “Next”.
- Enter the Wi-Fi password and double check if it’s correct. Then tap “Next”. Make sure the Wi-Fi is 2.4GHz and the password is case sensitive.
- The APP will automatically generate a QR code. Point the camera lens at the QR code from a distance of 6-8 inches. You will hear a beep and voice prompt when it’s scanned successfully.
- Name the camera and click “Bind Now” when the device is connected to Wi-Fi.
- Take the camera and phone to the installation location and click “Next” to test the signal strength. Ensure that the Wi-Fi signal strength is strong at the location.
APP Function Introduction
Explore the various functions available in the APP:
- Homepage introduction
- Multi-device view
- Add device
- Cloud service
- System settings
- Share camera
- Do not disturb mode
- Wi-Fi display
Firmware Update
To update the firmware, follow these steps:
- Enter system settings.
- Tap on “Device Health”.
- Tap on “Firmware” to update. Please keep the firmware up to date.
Share the Device
To share the device with other users, follow these steps:
- Enter the system settings.
- Select the sharing method: Share the QR code to a user. The other user adds the camera by scanning the QR code. The QR code is valid for 30 minutes and can only be shared with one user. Generate more QR codes for more members. A maximum of 4 people can live view.
Slide, Rotation, and Zoom
To use the slide, rotation, and zoom functions, follow these steps:
- Slide
- Rotation
- Zoom
Cruise and Guard Position
To set the guard position for the camera, follow these steps:
- Tap on the icon.
- Choose your pre-positions.
Packing List
- Camera *1
- Bracket *1
- USB Cable *1
- User manual *1
- Mounting Kit *1
Front
Rear
Caution : Use a power adapter with a power rating of 5V 1.5A or below.
Indicator light definition
Preparation
- Camera: Press and hold the power button until you hear the prompt, and the indicator light flashes blue slowly.
- Smartphone:
1. Enable the location service on your smartphone.
2. Connect your smartphone to your home Wi-Fi.- Reset: Press and hold the reset button for about 3 seconds.
Download the APP
Scan the QR code to download the APP. Or search for “O-KAM” to download through the app store (Google play/ APP Store).
O-KAM
APP account registration
- Click “Register now” at the login interface
- Select the address
- Enter your phone number
- Get the verification code.
- After entering the verification code you need to set the password and click Finish.
Add cameras
- Log in and click “Add” button found at the “Home” interface or click the ” ” in the upper right corner.
- At the QR code scanning interface, scan the QR code on the camera.
- The camera is ready for WiFi configuration when you hear the prompt. And click “Next”.
- Please enter the passwords and double check if it’s correct. Then tap “Next”.
- Make sure the Wi-Fi is 2.4Ghz. WiFi password case sensitive.
5. The APP will automatically generate a QR code. Point the camera lens at the QR code and keep it at a distance of 6-8 inches. You’ ll hear a beep and voice prompt when it’s scanned successfully.
6. When the device is connected to the WiFi, name the camera and click “Bind Now”.
7. Please take the camera and phone to the location where you’re going to install the camera, and then click “Next” to test the signal strength.
***** Make sure the Wi-Fi signal strength is strong at the location .
APP function introduction
Homepage introduction
Firmware update
- Enter system settings “ “- Tap on Device Health
- Tap on “Firmware” to update. Please keep the firmware up to date.
Share the device
Enter the system settings ”
Sharing method: Share the QR code to a user. The other user adds the
camera by scanning the QR code;The QR code is valid for 30 minutes, and one QR
code can only be shared with one user. Generate more QR codes for more
members. Maximum of 4 people can live view.
Rotational Control
Cruise and Guard position
- Quick 90° vertical cruise
- Quick 180° horizontal cruise
- Rotate to the guard position
- PTZ position reset
How to set guard position?
- Tap on the icon here
- Choose your pre-positions
FYI : The guard position is the default position of the camera, which is the prior postion you want the camera to keep an eye on.
AI Function
Tutorial Videos
Please scan the QR code below
Customer Service
Claim I-year warranty for your device.
- Please email us: aftersale@rraycom.com
- Phone : +1 2027384449 (Sun. – Thur. 8pm – 12pm)
- Facebook : Rraycomz@gmail.com
FAQ
How do I claim the warranty for my device?
Please email us at aftersale@rraycom.com or call us at +1 2027384449 Sun-Thur 8pm-12pm to claim the 1-year warranty for your device.