RrAYCOM T1 Security Camera User Manual
- October 30, 2023
- RrAYCOM
Table of Contents
Security Camera
User Manual
Packing List
Camera 1
Bracket 1
User Manual 1
Mounting Kit 1
◀▶
Power Adapter *1
Product Design
Front
- LED
- Light Sensor
- Indicator
- MIC
Back
- TF Card
- Loudspeaker
- Reset
- Micro USB port
Indicator Light Definition
Solid Red – Powered on
Red light flashes – Ready for configuration
Blue light flashes – Camera is connecting
Solid Blue – Wifi connected
Important
Please download the videos and take out the Micro SD card before reset the
camera. Otherwise, all the data stored in the cloud & memory card will be
deleted after reset.
Step 1
Download the APP
Please search for the “24H CAM” APP from Google Play or APP Store.
Step 2
24H CAM registration
Tap on “Sign Up” to begin, please follow the steps to enter your Email and
Verification Code.
You can enter the Account information or skip twice. Skip button is at the top
right corner.
Step 3
Preparation before configuration
- Make sure your smartphone is connected to the 2.4Ghz WiFi and the WiFi is visible.
- Turn on the location service on your smartphone.
- Make sure the WiFi has 5Mbps upload speed at least.
- The camera only support 2.4Ghz WiFi.
- Plug the power cable into the device.
Step 4
Add the camera
-
Log in and tap the “+” button (Top right corner) on the “Home” page.
-
Tap on the “QR Code”.
Step 5
Add the camera -
Please make sure the camera is powered on, and the indicator light is flashing red. Tap on the “Start Installation” button.
-
Turn off the Silent mode on your phone then tap the “Next button” .We want to listen to the instructions from the APP.
Step 6
Add the camera -
Then the check if your phone is connected to the Home WiFi.
Tap on “Next” if it’s connected.
Note:
If you didn’t see your Home WiFi name displayed on the page, you need to turn on the Location service of your smartphone.
Step 7
Add the camera -
Enter the passwords of the home WiFi. We want to make sure there’s no “Space” in the passwords.
Step 8
Add the camera -
If you see the indicator light is flashing red, that means the camera is ready to scan the QR code on your smartphone.
If the camera didn’t read the QR code, please see the troubleshootings below.
Note: Please make sure there’s no glare on the smartphone display.
If you see the solid red indicator light, you need to wait a few seconds, untill it’s flashing red.
Step 9
Name the camera -
Name the device, for example, Living room. Set the password, then the camera is connected successfully.
Step 10
Cloud Service -
The camera comes with a 30-day free trial of the cloud service.
Enjoy the 24/7 continuous recording videos on the cloud storage.
Zink Connection
The Zink Connection method is a backup connection method. If the camera has
difficulty scanning the QR code, we could connect the camera by following
these steps.
Step 1
Add the camera
-
Log in and tap the “+” button (Top right corner) on the “Home” page. Step 2 dd the
Add the camera -
Tap on the “Zink”.
Step 3
Add the camera -
Input the number of cameras you want to connect, and tap “Next”.
Step 4
Add the camera -
Please make sure the you’re right next to the security cameras.
The indicator should be flashing red
Then tap the button below to connect to the WiFi named “ZMD_SAP”.
This is the WiFi of the camera, there is no internet connection, which is fine.
Step 5
Add the camera -
Once your smartphone is connected to the ZMD_SAP WiFi, the APP will lead us to the next step.
We need to select the Home WiFi,and enter the passwords of the Home WiFi.
Step 6
Add the camera -
The 24H APP will automatically check if your phone/tablet could reach the server.
If your phone/tablet reached the server, it will go to the Finish setup page. Otherwise, we just need to connect the phone/tablet to the Home Wifi.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled enviroment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Customer Service
Claim 1-Year
Warranty for your device
Email :aftersale@rraycom.com
Phone : (sun-Thur.8 pm-2pm) +1 2027384449
Facebook:Rraycomz@gmail.com
If you have any after-sales questions please contact us
Documents / Resources
|
RrAYCOM T1 Security
Camera
[pdf] User Manual
2BA4K-T1, 2BA4KT1, t1, T1 Security Camera, T1, Security Camera, Camera
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>