Rraycom BW4 Wireless Powered Battery Camera Instruction Manual

Wire-Free Camera
Operation Instruction
（BW4)

Packing List

1. Camera *1
2. Bracket *1
3. USB Cable *1
4. Instruction*1
5. Mounting Kit *1

Appearance

At the bottom

Indicator light definition

Quick start

Power-on
Press and hold the power button until you hear the prompt, and the indicator light flashes blue slowly.
Reset
Press and hold the reset button for about 3 seconds, the green indicator light flashes, and the camera finish reset when the blue light is on.

Download the APP

Step-1
Scan the QR code to download the APP.
Or search for “O-KAM” to download through the app store (Google play/ APP Store).

https://www.veepai.com/veecam_download.html

APP account registration

Step-2

1. Click “Register now” at the login interface
   — Select the address
   — Enter your phone number
   — Get the verification code.

2. After entering the verification code you need to set the password and click Finish.

Add cameras

Step-3

1. Log in and click “Add” button found at the “Home” interface or click the “ ” in the upper right corner.
2. At the QR code scanning interface, scan the QR code on the camera.
3. Switch the camera “On”. (No need for “Long press”) Click “Next” when the indicator light flashes in blue slowly.
4. Confirm that the camera is ready for WiFi configuration when the indicator light flashes in blue slowly. And click “Next”
5. Enable the location service of your phone, and allow the O-KAM APP to access the location. Confirm the WiFi and enter the password.

• Make sure the Wi-Fi is 2.4Ghz. WiFi password case sensitive. 6. The APP will automatically generate a QR code. Point the camera lens at the QR code and keep it at a distance of 6-8 inches. You’ ll hear a beep and voice prompt when it’s scanned successfully. 7. When the device is connected to the WiFi, name the camera and click “Bind Now”. 8. Please take the camera and phone to the location where you’re going to install the camera, and then click “Next” to test the signal strength.
  Make sure there is strong WiFi signal strength at the location.

APP function introduction

Step-5

1. Home introduction.

Monitoring settings

Step-6

Enter system settings “ “Tap on the “Device Health”- “Firmware”to update (Suggested) “-monitoring function

Share the device

Step-7
Enter the system settings “ “- Share
Sharing method: Share the QR code to a user. The other user adds the camera by scanning the QR code;
The QR code is valid for 30 minutes, and one QR code can only be shared with one user. Generate more QR codes for more members.
Maximum of 4 people can live view.

Tutorial Videos
Please scan the QR code below

https://www.rraycom.com/blogs/news/user- guide-for-bw4-and-bw5

Customer Service
Claim
1-year
warranty for your device
Please email us:
 aftersale@rraycom.com

Phone:
+1 2027384449
(Sun. – Thur. 8pm – 12pm)
Facebook
Rraycomz@gmail.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>