DJI RC Pro Remote Controller User Manual

DJI RC Pro Remote Controller

Product Information

Specifications

• Model: DJI RC Pro
• User Manual Version: v1.4 2023.07

Introduction
The DJI RC Pro is a remote controller designed for use with DJI drones. It offers a wide range of features and functionalities to enhance your flying experience.

Product Profile
The DJI RC Pro features the following components:

1. Antennas: Relay aircraft control and video wireless signals.
2. Back Button: Press once to return to the previous screen. Press twice to return to the home screen.
3. Control Sticks: Use the control sticks to control the aircraft movements. Set the flight control mode in DJI Fly. The control sticks are removable and easy to store.
4. Return to Home (RTH) Button: Press and hold to initiate RTH. Press again to cancel RTH.
5. Flight Pause Button: Press once to make the aircraft brake and hover in place (only when GNSS or Vision Systems are available). The Flight Pause Button can be different in different intelligent flight modes. Refer to the description of the flight pause button for the aircraft for more information.
6. Flight Mode Switch: Switch between Cine, Normal, and Sport mode.
7. 5D Button: View the 5D Button features in DJI Fly by entering Camera View, Settings, and then Control.

Preparing the Remote Controller
Before using the DJI RC Pro, you need to perform the following steps:

1. Charging the Battery: Connect the remote controller to a power source using the provided charging cable and adapter. Allow the battery to fully charge before use.
2. Mounting: Attach the control sticks to the remote controller if they are not already attached. Ensure they are securely in place.
3. Activating the Remote Controller: Follow the instructions in the Quick Start Guide or User Manual to activate the remote controller. This may involve pairing it with your drone and configuring settings.

Remote Controller Operations
The DJI RC Pro offers various operations for controlling your drone. The following are some key operations:

• Checking the Battery Level : Press the corresponding button or access the battery level information on the touchscreen to check the battery level of the remote controller.
• Powering On/Off : Press and hold the power button to turn on or off the remote controller.
• Linking the Remote Controller: Follow the instructions in the User Manual to link the remote controller with your drone.
• Controlling the Aircraft: Use the control sticks to maneuver the aircraft in different directions. Refer to the User Manual for specific control instructions based on your drone model.
• Controlling the Camera: Access camera controls on the remote controller to adjust settings, capture photos, and record videos.
• Controlling the Gimbal: Use the dedicated controls on the remote controller to control the gimbal’s movement and stabilization.
• C ustomizable Buttons : The remote controller features customizable buttons that can be assigned specific functions or shortcuts for quick access.
• Status LED and Battery Level LEDs Description: The remote controller is equipped with LEDs that provide information about its status and battery level. Refer to the User Manual for a detailed description of the LED indicators.
• Remote Controller Alert: The remote controller may provide alerts or notifications for various events. Pay attention to these alerts and refer to the User Manual for further instructions.
• Touchscreen: The remote controller features a touchscreen display for accessing menus, settings, and other functions. Use touch gestures to interact with the touchscreen interface.

DJI Fly App
The DJI RC Pro is compatible with the DJI Fly app, which provides additional features and controls for your drone. Install the app on your mobile device and follow the instructions in the app to connect and control your drone using the remote controller.

Advanced Features
The DJI RC Pro offers advanced features that can enhance your flying experience. Some of these features include:

• Calibrating the Compass: Follow the instructions in the User Manual to calibrate the compass of your drone. This ensures accurate positioning and navigation.
• HDMI Settings: Adjust HDMI settings on the remote controller to configure video output options.
• Update Firmware: Regularly update the firmware of your remote controller to ensure optimal performance and compatibility with the latest features.
• Using DJI Fly: Explore the various features and functions of the DJI Fly app to maximize your drone’s capabilities.

FAQ

1. Q: How do I charge the battery of the remote controller?
   A: Connect the remote controller to a power source using the provided charging cable and adapter. Ensure the battery is fully charged before using it.

2. Q: How do I link the remote controller with my drone?
   A: Follow the instructions in the User Manual to link the remote controller with your specific drone model. This typically involves activating the drone and remote controller, initiating the linking process, and confirming the successful connection.

3. Q: How can I customize the buttons on the remote controller?
   A: Refer to the User Manual for instructions on customizing the buttons on the remote controller. You can assign specific functions or shortcuts to the customizable buttons for quick and easy access.

4. Q: What is the maximum transmission distance of the remote controller?
   A: The remote controller can reach its maximum transmission distance (FCC) in a wide open area with no electromagnetic interference using a MAVIC 3 drone at an altitude of approximately 120 meters. Actual transmission distance may vary based on environmental factors.

5. Q: How long does the battery of the remote controller last?
   A: The maximum operating time of the remote controller was tested in a lab environment and is for reference only. Actual battery life may vary based on usage and environmental conditions.

User Manual

• Searching for Keywords
  Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.

• Navigating to a Topic
  View a complete list of topics in the table of contents. Click on a topic to navigate to that section.

• Printing this Document
  This document supports high resolution printing.

Revision Log

Using this Manual

Legend

•  Important
• Hints and Tips
• Reference

Read Before the First Use

Read the following documents before using the DJITM RC Pro.

1. Quick Start Guide
2. User Manual
   It is recommended to watch all tutorial videos on the official DJI website and read quick start guide before using for the first time. Refer to this user manual for more information.

Video Tutorials
Go to the address below or scan the QR code to watch the DJI RC Pro tutorial videos, which demonstrate how to use the DJI RC Pro safely.

https://s.dji.com/guide9

Product Profile

Introduction

• The DJI RC Pro remote controller features O3+, the latest version of DJI’s signature OCUSYNCTM image transmission technology, and can transmit a live HD view from the camera of an aircraft at a distance of up to 15 km [1]. The remote controller also supports dual transmission, making the HD video downlink stable and reliable. The remote controller has a maximum operating time of 3 hours [2].
• High-Bright Screen: The built-in 5.5-in high brightness 1000 cd/m2 screen boasts a resolution of 1920×1080 pixels.
• Multiple Connection Options: Users can connect to the internet via Wi-Fi and the Android operating system comes with a variety of functions such as Bluetooth and GNSS.
• Audio and Video: With the built-in speaker, the remote controller supports H.264 4K/120fps and H.265 4K/120fps video, which also supports video output via the Mini HDMI port.
• Extended Storage Capability: The internal storage of the remote controller is 32 GB and also supports the use of microSD cards to store the photos and videos, making it easier to export to a computer.
• Reliable in More Environments: The remote controller can operate normally within a wide temperature range from -10° to 40° C (14° to 104° F).
• Compatible with Multiple DJI Aircraft: Users can switch aircraft in DJI Fly app to be compatible with different aircraft models. Currently supports Mavic 3, DJI Air 2S (when using a remote controller firmware version of v03.01.05.00 or later and an app version of v1.5.8 or later).

1. The remote controller can reach its maximum transmission distance (FCC) in a wide open area with no electromagnetic interference using a MAVICTM 3 at an altitude of approximately 120 meters.
2. The maximum operating time was tested in a lab environment and is for reference only.

DJI RC Pro

1. Antennas
   Relay aircraft control and video wireless signals.

2. Back Button
   Press once to return to the previous screen. Press twice to return to the home screen.

3. Control Sticks
   Use the control sticks to control the aircraft movements. Set the flight control mode in DJI Fly. The control sticks are removable and easy to store.

4. Return to Home (RTH) Button
   Press and hold to initiate RTH. Press again to cancel RTH.

5. Flight Pause Button
   Press once to make the aircraft brake and hover in place (only when GNSS or Vision Systems are available). The Flight Pause Button can be different in different intelligent flight modes. Refer to the description of the flight pause button for the aircraft for more information.

6. Flight Mode Switch
   Switch between Cine, Normal, and Sport mode.

7. 5D Button
   View the 5D Button features in DJI Fly by entering Camera View, Settings, and then Control.

8. Power Button
   Press once to check the current battery level. Press and then press and hold to power the remote controller on or off. When the remote controller is powered on, press once to turn the touchscreen on or off.

9. Confirm Button*
   Press once to confirm a selection. The button does not have a function when using DJI Fly.

10. Touchscreen
    Touch the screen to operate the remote controller. Note that the touchscreen is not waterproof. Operate with caution.

11. microSD Card Slot
    Use to insert a microSD card.

12. USB-C port
    For charging.

13. Mini HDMI Port
    For video output.

14. Gimbal Dial
    Controls the tilt of the camera.

15. Record Button
    Press once to start or stop recording.

16. Status LED
    Indicates the status of remote controller.

17. Battery Level LEDs
    Displays the current battery level of the remote controller.

18. Focus/Shutter Button
    Press halfway down on the button to auto focus and press all the way down to take a photo.

19. Camera Control Dial
    For zoom control.
    The function of the button when linked to an aircraft will be able to be customized in DJI Fly. The updates are in effect when using a remote controller firmware version of v03.01.07.00 or later and an app version of v1.6.4 or later.

20. Air Vent
    Used for heat dissipation. Do not block the air vent during usage.

21. Control Sticks Storage Slot
    For storing the control sticks.

22. Customizable C1 Button
    Switch between recentering the gimbal and pointing the gimbal downward. The function can be set in DJI Fly.

23. Speaker
    Outputs sound.

24.  Customizable C2 Button
    Press once to turn the Auxiliary Bottom Light on or off. The function can be set in DJI Fly.

25. Air Intake
    Used for heat dissipation. DO NOT cover the air intake during use.

Preparing the Remote Controller

Charging the Battery

• The built-in battery is placed in hibernation mode before delivery. It must be charged before using for the first time.
• It takes approximately two hours to fully charge the remote controller using a recommended USB charger rated 12V and one and a half hours using a recommended USB charger rated 15V.
• It is recommended to use an FCC/CE certified USB charger rated 12V or 15V.
• Recharge the battery at least every three months to prevent over discharging. The battery depletes when stored for an extended period.

Mounting

1. Remove the control sticks from the storage slots on the remote controller and screw them into place.
2. Unfold the antennas.

Make sure the control sticks are firmly mounted.

Activating the Remote Controller

The remote controller needs to be activated before using for the first time. Make sure the remote controller can connect to the internet during activation. Follow the steps below to activate Internet the remote controller.

1. Power on the remote controller. Select the language and tap “Next”. Carefully read the terms of use and privacy policy and tap “Agree”. After confirming, set the country/region.
2. Connect the remote controller to the internet via Wi-Fi. After connecting, tap “Next” to continue and select the time zone, date, and time.
3. Log in with your DJI account. If you do not have an account, create a DJI account and log in.
4. Tap “Activate” on the activation page.
5. After activating, select if you would like to join the improvement project. The project helps to improve the user experience by sending diagnostic and usage data automatically  every day. No personal data will be collected by DJI.

Check the internet connection if the activation fails. If the internet connection is normal, please try to activate the remote controller again. Contact DJI Support if the issue persists.

Remote Controller Operations

Checking the Battery Level
Press the power button once to check the current battery level.

Powering On/Off
Press and then press again and hold to power the remote controller on or off.

Linking the Remote Controller
The aircraft and remote controller must be linked before use. Follow these steps to link a new remote controller.
Method 1:

1. Power on the remote controller and the aircraft.
2. Press the C1, C2, and record button simultaneously until the status LED blinks blue and the remote controller beeps.
3. Press and hold the power button of the aircraft for more than four seconds. The aircraft beeps once to indicate it is ready to link. The aircraft beeps twice to indicate linking is successful. The battery level LEDs of the remote controller will glow solid.

Method 2:

1. Power on the remote controller and the aircraft.
2. Launch DJI Fly.
3. In camera view, tap  and select Control and Pair to Aircraft (Link).
4. Press and hold the power button of the aircraft for more than four seconds. The aircraft beeps once indicating it is ready to link. The aircraft beeps twice indicating linking is successful. The battery level LEDs of the remote controller will glow solid.
   • Make sure the remote controller is within 1.6 ft (0.5 m) of the aircraft during linking.
   • Make sure the remote controller is connected to the internet when logging in using a DJI account.

Controlling the Aircraft

Control Mode

• The control sticks control the aircraft’s orientation (pan), forward/backward movement (pitch), altitude (throttle), and left/right movement (roll). The control stick mode determines the function of each control stick movement. Three preprogrammed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can be configured in DJI Fly.
• The default mode is Mode 2. In each of the three pre-programmed modes, the aircraft hovers in place at a constant orientation when both sticks are centered. See the figures below to see the function of each control stick in the three preprogrammed modes.

Mode 1

Mode 2

Mode 3

• Center position: control sticks are centered.
• Moving the control  stick: control sticks are pushed away from the center.

The figure below explains how to use each control stick. Mode 2 has been used as an example.

stick up to ascend and down to descend. The more the stick is pushed away from the center position, the faster the aircraft will change altitude. Push the stick gently to prevent sudden and unexpected changes in altitude.
| | Moving the left stick to the left or right controls the orientation of the aircraft. Push the stick left to rotate the aircraft counter-clockwise and right to rotate the aircraft clockwise. The more the stick is pushed away from the center position, the faster the aircraft will rotate.
| | Moving the right stick up and down changes the aircraft’s pitch. Push the stick up to fly forward and down to fly backward. The more the stick is pushed away from the center position, the faster the aircraft will move.
| | Moving the right stick to the left or right changes the aircraft’s roll. Push the stick left to fly left and right to fly right. The more the stick is pushed away from the center position, the faster the aircraft will move.

• Keep the remote controller away from magnetic materials to avoid it being affected by magnetic interference.
• To avoid damage, it is recommended that the control sticks are removed and stored in the storage slot on the remote controller during transportation or storage.

Flight Mode Switch
Toggle the switch to select the flight mode.

• Normal Mode: The aircraft utilizes GNSS and the Vision Systems and Infrared Sensing System to locate and stabilize itself. When the GNSS signal is strong, the aircraft uses GNSS to locate and stabilize itself. When the GNSS is weak but the lighting and other environment conditions are sufficient, the aircraft uses the vision systems to locate and stabilize itself.
• Sport Mode: In Sport Mode, the aircraft uses GNSS for positioning and the aircraft responses are optimized for agility and speed making it more responsive to control stick movements. Note that obstacle sensing is disabled in Sport Mode.
• Cine Mode: Cine mode is based on Normal mode and the flight speed is limited, making the aircraft more stable during shooting.

Refer to the flight modes section in the aircraft’s user manual for more information about flight mode features for different aircraft types.

RTH Button
Press and hold the RTH button until the remote controller beeps to start RTH. Press this button again to cancel RTH and regain control of the aircraft. Refer to the Return to Home section for more information about RTH.

Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the antennas are positioned in relation to the aircraft as illustrated below.

The optimal transmission range is where the antennas are facing toward the aircraft and the angle between the antennas and the back of the remote controller is 180° or 270°. The illustrations show situations where the operator and aircraft are far away.

•  Do not use other wireless devices operating at the same frequency as the remote controller. Otherwise, the remote controller will experience interference.
• A prompt will be received in DJI Fly if the transmission signal is weak during flight. Adjust the antennas to make sure that the aircraft is in the optimal transmission range.

Controlling the Camera

The remote controller can be used to control the camera.

1. Focus/Shutter Button
   Press halfway down to auto focus and press all the way down to take a photo. The photo mode can be set in DJI Fly.

2. Record Button
   Press once to start or stop recording.

3. Camera Control Dial
   Use to adjust the zoom.

Controlling the Gimbal
The remote controller can be used to control the gimbal.

1. Gimbal Dial
   Use to adjust the tilt of the gimbal. Rotate the dial clockwise to tilt the gimbal up. Rotate the dial counter clockwise to tilt the gimbal down.

Customizable Buttons
The customizable buttons include the C1, C2, C3*, and 5D button. Go to System Settings in DJI Fly and select Control to customize the function of the button .

The ability to customize the C3 button and the right dial are supported when using a remote controller firmware version of v03.01.07.00 or later and an app version of v1.6.4 or later.

Status LED and Battery Level LEDs Description

Status LED
The status LED displays the linking status and warnings for control stick, low battery level, and high temperature.

battery level of the aircraft is low
Solid green| Connected with aircraft
Blinks blue| The remote controller is linking to an aircraft
Solid yellow| Firmware update failed
Blinks yellow| The battery level of the remote controller is low
Blinks cyan| Control sticks not centered

Battery Level Indicators
Battery level indicators display the battery level of the controller.

Remote Controller Alert
The remote controller vibrates or beeps when there is an error or warning. Pay attention when prompts appear on the touchscreen or in DJI Fly. Slide down from the top to select Do Not Disturb or Mute to disable some alerts.

Touchscreen

Home Screen

1. Time
   Displays local time.

2. DJI Fly
   Tap to enter DJI Fly.

3. Gallery
   Tap to check stored images and videos.

4. Files
   Tap to check stored files.

5. Browser
   Tap to open the browser.

6. Setting
   Tap to enter system settings.

7. Guide
   Tap to read the guide and quickly learn about the remote controller buttons and LEDs.

8. Wi-Fi Signal
   Displays the Wi-Fi signal status when connected to Wi-Fi. It can be enabled or disabled in the shortcut settings.

9. Battery Level
   Displays the battery level of the remote controller.

Operations

• Slide from the left or right to the center of the screen to return to the previous screen.
• Slide up from the bottom of the screen and release to return to the home screen.
• Slide diagonally right from the bottom of the screen and hold to access recently opened apps when on the home screen.
• Slide up from the bottom of the screen and hold to access recently opened apps when not on the home screen.

The following updates are in effect when using a remote controller firmware version of v03.01.07.00 or later.

• Slide from the left or right to the center of the screen to return to the previous screen.
• Slide up from the bottom of the screen to return to the home screen.
• Slide up from the bottom of the screen and hold to access recently opened apps.

Shortcut Settings

1. Notifications
   Tap to check system notifications.

2.   Recent
   Tap to check recently opened apps.

3. Home
    Tap to return to the home screen.

4. System Settings
   Tap to access system settings.
   5. Shortcuts

   • : Tap to enable or disable Wi-Fi. Hold to enter settings and connect to or add a Wi-Fi network.

   • : Tap to enable or disable Bluetooth. Hold to enter settings and connect with nearby Bluetooth devices.

   • : Tap to enable Do Not Disturb mode. In this mode, system prompts will be disabled.

   •  : Display enhancement. Once enabled, the display brightness is enhanced to assist in shooting. However, there are differences between the source and display effect, while the source photo or video taken by the aircraft is not affected.

   •  : Tap to start recording the screen. While recording, the screen displays the recording time.
     Tap Stop to stop recording.

   •  : Tap to screenshot the screen.

   •  : Mobile data. Tap to turn mobile data on or off; long press to set mobile data and diagnose network connection status.

   • : Tap to enable Airplane mode. Wi-Fi, Bluetooth, and mobile data will be disabled.

5. Adjusting Brightness
   :The screen is in auto brightness mode when the icon is highlighted. Tap the icon or slide the bar to switch to manual brightness mode.

6. Adjusting Volume
   Slide the bar to adjust the volume and tap to mute. Note that after muting, all the remote controller sounds will be completely disabled, including button beeping tone and related alarm sounds. Please turn on the mute with caution.

Combination Buttons
Some frequently-used features can be activated by using combination buttons. To use combination buttons, hold the back button and operate the additional button.
Checking Available Combination Buttons
Power on the remote controller, enter the home screen, and tap Guide to check combination buttons.

Using Combination Buttons
The functions of the combination buttons cannot be changed. The following table displays the function of each combination button. Hold the back button and operate the additional button when using this feature.

DJI Fly App
Tap DJI Fly on the home screen to check the flight status and set flight and camera parameters. Since the DJI RC Pro is compatible with multiple aircraft models and the interface of DJI Fly may vary depending on the aircraft model, refer to the DJI Fly app section in the user manual of the relevant aircraft for more information.

Advanced Feature

Calibrating the Compass
The compass may need to be calibrated after the remote controller is used in areas with electromagnetic interference. Follow the steps below to calibrate the remote controller.

1. Enter the home screen.
2. Select Settings, scroll down, and tap Compass.
3. Follow the diagram on the screen to calibrate your remote controller.
4. The user will receive a prompt when the calibration is successful.

HDMI Settings
The touchscreen can be shared to a display after connecting the HDMI port of the remote controller. The resolution can be set by entering Settings, Display, and then Advanced HDMI.

Update Firmware

Using DJI Fly

1. Power on the remote controller and make sure it is connected to the internet.
2. Run DJI Fly. A prompt will appear when new firmware is available. Tap the prompt to enter the update screen.
3. Update will start automatically after downloading the latest firmware.
4. The remote controller automatically restarts when the update is complete.
   • Make sure the remote controller has a battery level of more than 20% and the memory storage of at least 6.8 GB before updating.
   • The update takes approximately 15 minutes (depending on network strength). Make sure the remote controller is connected to the internet during the whole update process.

Appendix

Specification

O3+|
---|---
Operation Frequency Range| 2.400-2.4835 GHz; 5.725-5.850 GHz*
Max Transmission Distance (Unobstructed, free of interference)| 15 km (FCC); 8 km (CE/SRRC/MIC)
Transmission Power (EIRP)|

• 2.4 GHz: <33 dBm (FCC); <20 dBm (CE/SRRC/MIC)
• 5.8 GHz: <33 dBm (FCC); <14 dBm (CE); <23 dBm (SRRC)

Wi-Fi|
Protocol| 802.11b/a/g/n/ac/ax 2×2 MIMO
Operation Frequency Range| 2.400-2.4835 GHz; 5.725-5.850 GHz*
Transmission Power (EIRP)|

• 2.4 GHz: <26 dBm (FCC); <20 dBm (CE/SRRC/MIC)
• 5.8 GHz: <26 dBm (FCC/SRRC); <14 dBm (CE)

Bluetooth|
Protocol| Bluetooth 5.1
Operation Frequency Range| 2.400-2.4835 GHz
Transmission Power (EIRP)| <8 dBm
General|
Battery| Li-ion (5000 mAh @ 7.2 V)
Charging Type| Recommended to use USB chargers rated 12V or 15V
Rated Power| 12 W
Storage Capacity| ROM 32GB + expandable storage via microSD card
Charging Time|

• 2 hours (using a USB charger rated 12V)
• 1.5 hours (using a USB charger rated 15V)

Operating Time| 3 hours
Video Output Port| Mini HDMI Port
Operation Temperature Range| -10° to 40° C (14° to 104° F)
Storage Temperature Range|

• Less than one month: -30° to 60° C (-22° to 140° F)
• One to three months: -30° to 45° C (-22° to 113° F)
• Three to six months: -30° to 35° C (-22° to 95° F)
• More than six months: -30° to 25° C (-22° to 77° F)

Charging Temperature Range| 5° to 40° C (41° to 104° F)
Supported Aircraft Models**| DJI Mavic 3; DJI Air 2S
GNSS| GPS+ GLONASS+ Galileo
Weight| Approx. 680 g
Model| RM510

• • 5.8 GHz is unavailable in some countries due to local regulations.
• ** The DJI RC Pro will support more DJI aircraft in future. Visit the official website for the latest information.
  • 20 © 2021 DJI All Rights Reserved.
  • DJI Support
  • http://www.dji.com/support

This content is subject to change.

• Download the latest version from https://www.dji.com/rc-pro/downloads
• If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com.
• DJI is a trademark of DJI.
• Copyright © 2021 DJI All Rights Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>