legrand 0 648 91A Connected Switch Instruction Manual
- June 16, 2024
- Legrand
Table of Contents
Instruction Manual
Connected switch (with dimmer option) without neutral 0 648 91A – 0 677 21A –
0 677 71A – 0 777 01LA – 6 000 81A – 6 001 81A
This pack is a connected accessory which requires you to buy and install the
Céliane with Netatmo connected starter pack first.
Pack contents
Characteristics
| In default mode (on/off ), this switch works with the following types of bulb |
|---|
50/60 Hz| 2 x 1,5 mm2
1 x 2,5 mm2| | |
---|---|---|---|---
| |
240 V~| Max.| 125 W| 125 VA| 125 VA
Min.| 5 W| 5 VA| 5 VA
110 V~| Max.| 75 W| 75 VA| 75 VA
Min.| 5 W| 5 VA| 5 VA
(*) or 10 bulbs max. For comfortable lighting, we recommend using bulbs of the
same type and manufacturer.
Product NOT COMPATIBLE with ferromagnetic transformer Risk of product breaking
In dimmer option operating mode (which can be activated via the App), this
switch functions only with dimmable bulbs (identifiable by the logo on
packaging).
The bleeder ref 040149 have to be used systematically to :
-avoid flash ghost effects when the load is OFF.
| | |
---|---|---|---
110-240 V~| 50/60 Hz| 11 mA max.| – 5° C + 55° C
Before starting : wiring precautions
If you plan to install two-way light switches or switched power outlets, read
the following precautions:
To control a light with two or more switches, only use the products: 
Do
not use: two connected switches (with dimmer option) to control the same
lighting point.
-
Mandatory safety precautions OFF
OFF Switch off the power at the main circuit breaker Make sure that the power is off before continuing with the installation. -
Install the connected switch (with dimmer option)
The connected switch (with dimmer option) works with standard bulbs or
dimmable bulbs including LEDs over 5 W. Using dimmable LEDs is mandatory when
dimmer mode is activated. Existing wiring
Replacement of an existing 2-way switch by a connected switch + wireless light
switch
Previous switch replaced by the wireless light switch
Wireless switch + wired connected switch
Use a connector to connect all 3 wires together
(travellers 1 and 2 and lamp return wire). Use a dedicated connector to
insulate the neutral wire (if present)
Replacement of a 2-way switch by a connected switch + mechanical push-button.
Previous switch replaced by the mechanical push button
To add
a connected product to your connected installation, you should follow the
instructions:
– in the Legrand Home + Control application (Settings/Add a new product
section)
– or consult the user manual on legrand.com
www.legrand.fr
LEGRAND – Pro and Consumer Service – BP 30076
87002 LIMOGES CEDEX FRANCE • www.legrand.com
Safety instructions
This product should be installed in compliance with installation rules,
preferably by a qualified electrician. Incorrect installation and/or incorrect
use can lead to risk of electric shock or fire. Before carrying out the
installation, read the instructions and take account of the products specific
mounting location. Do not open up, dismantle, alter or modify the device
except where specifically required to do so by the instructions. All Legrand
products must be opened and repaired exclusively by personnel trained and
approved by Legrand. Any unauthorised opening or repair completely cancels all
liabilities and the rights to replacement and guarantees. Use only Legrand
brand accessories.
SIMPLIFIED EU DECLARATION OF CONFORMITY
The undersigned,
Legrand
declares that the radio-electric equipment referred to in these instructions
complies with directive 2014/53/EU. The full text of the EU declaration of
conformity is available on the following website :
www.legrandoc.com
References
- Welcome to Legrand - Legrand
- Legrand - Spécialiste des infrastructures électriques et numériques du bâtiment
- Legrand E-catalog International | Electrical Ranges of products & Connected Solutions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>