SIHANM SIA000062 Double Inflatable Sleeping Pad User Manual
- June 6, 2024
- SIHANM
Table of Contents
SIHANM
DOUBLE INFLATABLE SLEEPING PAD
W/STEP-ON PUMP
USER MANUAL
Double Inflatable Sleeping Pad W/Step-on Pump
Thank you for purchasing SIHANM inflatable sleeping pad.
Please read this user manual carefully before use and keep it for future
reference.
Product Accessories
Product X 1
User Manual X 1
How to use
Step1:
While laying a sleeping pad on the ground as pictured, plug the valve near the
pillow so that air will not escape during inflation.
Step2:
Open the air valve on the step-on pump, and dongle the cap as shown. This is
to avoid the cap being damaged in the inflation process.
Step3:
Step on the inflation pump with your entire foot (as shown)repeatedly until
the pad is well inflated. Place the cap back and inspect for leaks around the
valve.
Tip: Please make sure the valve is closed after inflation,otherwise it
will leak.
Step4:
To begin the deflation process, open the deflation valve as shown and start
rolling up the pad from the opposite end. You should feel air escaping from
the valve.
Step5:
While keeping the deflation valve open and the cap laid flat as shown in the
picture, keep rolling up the rest of the pad, applying pressure where
necessary to squeeze out residue air trapped inside the mat.
NOTE:
When using the product for the first time, you might notice a subtle “plastic
” smell. This is not a product defect and the smell will soon disappear
completely. If needed, you can unroll the sleeping pad and air it out in an
appropriate location(e.g. garage or unused guest bedroom).
DANGER
Please keep children away from packing materials and plastic bags for the risk
of suffocation.