NINJUTSO Sora Wireless Superlight Gaming Mouse User Guide
- June 3, 2024
- ninjutso
Table of Contents
NINJUTSO Sora Wireless Superlight Gaming Mouse
How to Change DPI and Report Rate:
Sora is designed to be plug-n-play. You can change the DPI value by pressing the DPI button. Pressing two side buttons together for 3 seconds allows you to change the report rate. The value and indicator status of both settings are as below:
DPI:
400
|
---|---
800
|
1600
|
1600
|
Hz:
125Hz|
---|---
500Hz|
1000Hz|
LED Indicator Status
Flashes|
---|---
Flashes|
Stays|
Battery Status:
<10%
Charging
Full
For more advanced settings such as macros, profile, DPI, power management, etc., please download the software from https://ninjutso.com/pages/download
Warranty:
For any products or parts that become defective within one year from the date of purchase, you may send back the product and request for warranty. Purchase evidence, such as receipt, order number and such, and proof of the issue, like pictures, videos and such, have to be provided for redeeming the warranty.
Warranty only covers defects of parts or products caused by mist-manufacturing of functionality. It does not cover regular wear and tear, including but not limited to: breakage due to abuse, water damage, improper usage, etc. Warranty expires if the product is opened without permission from Ninjutsu.
To redeem the warranty, please contact the retailer where you purchased from or email us at support@ninjutso.com.
Federal Communication Commission Interference Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WEEE
This product must not be disposed of with your other household waste or treat
them in compliance with the local regulations or contact your local city
office, your household waste disposal service or the shop where you purchased
the product.
Europe -EU Declaration of Conformity
Hereby, Poetry Society Technology Co., Ltd. declares that the equipment which
is compliance with directive RoHS 2.0(2015/863/EU), EMC Directive(2014/30/EU),
and LVD(2014/35/EU) which are issued by the Commission of the European
Community.
Poetry Society Technology Co., Ltd. hereby confirms, to date, based on the feedback from our supplier indicates that our products shipping to EU territory comply with REACH(Registration, Evaluation, Authorization, and Restriction of Chemicals – (EC)1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>