ALTEC LANSING IMT7002 SOUNDROVER Wireless Party Speaker 180W Peak Power User Guide
- June 7, 2024
- Altec Lansing
Table of Contents
SOUNDROVER
WIRELESS PARTY SPEAKER
180W PEAK POWER.
WIRELESS PARTY SPEAKER
WITH LIGHTING EFFECTS
ITEM: IMT7002
IN THE BOX
IMT7002 SoundRover Wireless Party Speaker
Wired Microphone
Power Cable
INPUT/ OUTPUT PORTS
SPEAKER CONTROLS
AUDIO MODES
Bluetooth Pairing:
Go to the Bluetooth page in Settings. Make sure Bluetooth is on before
connecting to the available device “AL SoundRover”.
If the speaker does not automatically go into pairing after turning it on
press the BT/Pair button.
FM Radio:
- Press and hold the Play/Pause button to perform a scan of the FM band. The SoundRover will store the strongest stations as presets.
- Press the Next/Scan and Previous/Scan buttons to move a preset.
- Press and hold the Next/Scan and Previous/Scan buttons to scan to the next strongest radio station.
LIGHT MODE
Press the Light Mode button to toggle through the different modes. Press and
hold the button for three seconds to turn the side LEDs ON/OFF.
Mode 1: Multicolor swirl
Mode 2: Back and forth
Mode 3: Thin swirl
Mode 4: Slow multicolor ring
Mode 5: Fast multicolor ring
Mode 6: Multicolor ring
Mode 7: Slow multicolor, growing ring
Mode 8: Fast multicolor, growing ring
TRUE WIRELESS
The SoundRover has the True Wireless function. If you own two SoundRovers, follow the directions below to pair them together.
-
Turn the first speaker on and pair it to a Bluetooth-compatible device.
-
Press and hold the Bluetooth/Pair button on the first speaker for two seconds. ‘HOST’ will appear on the display screen indicating it is the main speaker.
-
Turn on the second speaker. Press the Bluetooth/Pair button and ‘BT’ will appear on the display screen. When this appears the first speaker will automatically connect to the second speaker.
-
To disconnect the True Wireless function press the Bluetooth button on either speaker.
MICROPHONE
Connect the included microphone into the Microphone jack to sing along to
music.
Adjust the volume of the microphone by turning the Mic Level knob.
SAFETY PRECAUTIONS
SPECIFICATIONS
Bluetooth Spec: V4.2
Bluetooth Range: up to 33 Feet
Power Supply: AC100-240V
Battery Type: 11.1V, 7000 mAh Lithium-Ion Battery Output: 60 W
Charge Time: Approximately 5 hours
Play Time: Approximately 6 Hours
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Having Trouble?
We’re here to help!
Call us 24/7 at 1-855-292-4087
E-mail us at [email protected]
or visit us at alteclansing.com
Keep manual and all relevant information for future
reference.