PROFICOOK PC-FR 1269 H Hot Air Fryer Instruction Manual
- June 16, 2024
- PROFICOOK
Table of Contents
- PROFICOOK PC-FR 1269 H Hot Air Fryer
- Setting Temperature and Cooking Time
- IMPORTANT
- Instruction Manual
- Unpacking the Appliance
- Overview of the Components / Scope of Delivery
- Electrical Connection
- Before First Use
- Function Buttons
- Operation
- Automatic Programmes
- Interrupting Operation
- Cleaning
- Storage
- Troubleshooting
- Technical Data
- Disposal
- GARANTIEKARTE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PROFICOOK PC-FR 1269 H Hot Air Fryer
Specifications
- Model: PC-FR1269H_IM
- Date: 29.08.23
Product Usage Instructions
Before using the appliance for the first time, please take note of the following:
WARNING: It is important to read the separately enclosed safety instructions before using the appliance.
Function Keys
The appliance has two sets of function keys, labeled ” ” and ” ” on the control panel.
Setting Temperature and Cooking Time
- Press the temperature button to adjust the desired temperature.
- Press the cooking time button to set the desired cooking time.
- After the set time has elapsed, the display will show the cooking.
IMPORTANT
Be sure to read the separately enclosed safety instructions first.
Instruction Manual
Thank you for choosing our product. We hope you will enjoy using the
appliance.
Read the instruction manual and the separately enclosed safety instructions
very carefully before using this appliance. Keep these documents, including
the warranty certificate, receipt and, if possible, the box with the inner
packaging in a safe place. If you pass the appliance on to a third party,
always include all the relevant documents.
Symbols in this Instruction Manual
Important information for your safety is specially marked. It is essential to
comply with these instructions in order to avoid accidents and prevent damage
to the appliance:
WARNING
This warns you of dangers to your health and indicates possible injury
risks.
CAUTION
This refers to possible hazards to the appliance or other objects.
Unpacking the Appliance
- Remove the appliance from its packaging.
- Remove all packaging material, such as foils, filling material, cable ties and cardboard packaging.
- Check the scope of delivery for completeness.
- If the contents of the packaging are incomplete or if damage can be detected, do not operate the appliance. Return it to the dealer immediately.
Overview of the Components / Scope of Delivery
Appliance
-
Air inlet openings
-
Air outlet openings
-
Control panel
-
Deep-frying container handle
-
Deep-frying container
-
Recessed handle
-
Silicone knobs
-
Sieve insert
Control Panel -
Indicator lights for the automatic programmed
French fries
Ribs
Prawns
Chicken legs
Steak
Cake
Fish -
Display
-
Button (increase cooking time)
-
Button (reduce cooking time)
-
Button (automatic programmed: Keep warm / Defrost)
-
Button (ready for operation / standby)
-
Button (start / stop cooking)
-
Button (select automatic programmer)
-
Button (reduce temperature)
-
Button (increase temperature)
-
Operating display
Warnings for the Use of the Appliance
WARNING : Risk of Burns!
Only touch the deep-frying container by the handle. Use oven gloves if
necessary.
Hot steam may escape from the air outlet during operation. Keep enough
distance.
CAUTION
- The air inlet and air outlet openings should not be covered to ensure sufficient air circulation.
- Keep a sufficient safety distance (30 cm) from easily inflammable objects such as furniture, curtains, etc.
- Do not operate the appliance under wall cabinets because of the rising heat and vapors.
- Do not manipulate the safety switch.
- Overload! Do not use a multiple socket, as this appliance is too powerful.
Notes for Use
Location
- Place the appliance on a non-slip, level and heat-resistant surface.
- Do not place the appliance with the back directly against a wall.
- Never place the appliance or the power cord on hot surfaces or near heat sources (e. g. cooker, hob).
Electrical Connection
Before inserting the mains plug into the socket, make sure that the mains
voltage matches that of the appliance. You will find the information on the
type plate.
Standby (Ready State)
The appliance is in standby mode when only the button is lit. The appliance
switches to standby mode in the following situations:
- When the mains plug is plugged in.
- If no button is pressed for about 60 seconds.
- When the set cooking time has elapsed. Previously, appears briefly on the display. 5 signal tones sound.
Switching the Appliance On / Off
Use the button to switch the appliance on and off.
- As soon as you switch on the appliance, the ready-to-use display appears.
- After the time has elapsed, appears in the display. The fan runs briefly to cool down the appliance. Then 5 signal tones sound and the appliance switches to standby.
Before First Use
- There is a protective layer on the heating element. To remove this, operate the appliance for approx. 15 minutes without contents. Slight smoke and odors are normal during this process. Ensure that there is sufficient ventilation.
WARNING
Let the appliance cool down before cleaning it!
- Unplug the appliance from the mains.
- Wipe out the deep-frying container, the sieve insert and the interior of the appliance before use.
Notes on Use
- This appliance is intended for the preparation of solid food. Do not prepare soups or other liquid foods in it.
- A safety switch prevents the appliance from being used without a deep-frying container.
- For best results, do not fill the deep-frying container more than the MAX mark. Never overfill the deep-frying container so that the food does not come into contact with the heating element.
- Never add oil or any other liquid to the deep-frying container. To achieve a crispy result, the food can be spread with a little oil.
- Do not prepare foods with a high fat content (e. g. sausages) with the appliance.
- All foods that are also suitable for the oven can be prepared in the appliance.
- The sieve insert ensures that the accumulated fat settles to the bottom of the deep-frying container. This makes the food crispier.
- When baking cakes, bread, etc., note that the dough expands. The dough must not come into contact with the heating element.
- The sieve insert can be removed for baking bread or similar.
- Food that lies on top of each other during cooking should be shaken halfway through the cooking time. This optimises the cooking result and prevents uneven cooking.
- Soak homemade potato products for at least 30 minutes after cutting to reduce potato starch. Then dry the potato pieces well with kitchen paper.
- The cooking time depends on various factors: Size, texture, amount of food and set temperature.
- If you do not preheat the hot air fryer, add 3 minutes to the cooking time.
- Fry steaks and larger quantities of meat in a pan before cooking in the hot air fryer. Time and temperature depend on the desired cooking level.
- You can also reheat food with the appliance. Select the automatic programmed “Keep warm / Defrost” with the button . The preset temperature and time can be adjusted individually.
Function Buttons
- The buttons on the appliance are touch buttons. Touch the buttons lightly with a finger to perform the function. Each key press is confirmed with a beep.
- If you keep the button or pressed, a quick run starts.
Setting the Temperature and Cooking Time
The buttons and are each present twice on the control panel.
- With the button or above and below the symbol to set the temperature (80 – 200 °C).
- With the button or above and below the symbol to you set the cooking time (1 – 60 minutes).
- Temperature and cooking time are displayed alternately on the display.
Operation
- Make sure that the appliance is disconnected from the mains.
- Pull the deep-frying container out of the appliance by the handle.
- If necessary, place the sieve insert with the silicone knobs in the appliance. Push the sieve insert all the way down.
- Push the deep-frying container back into the appliance. It must audibly click into place.
- Connect the appliance to a properly installed safety socket. A beep sounds and all the symbols light up briefly. Then only the button lights up.
- Press the button to switch the appliance to standby. The appliance is factory-set to a temperature of 180 °C and 15 minutes.
- We recommend preheating the appliance for about 3 minutes without cooking food. Set the required temperature and cooking time to 3 minutes.
- Press the button to start the cooking process.
- When the time has elapsed , OFF appears in the display. The fan runs briefly to cool down the appliance. Then 5 beeps sound and the appliance switches to standby.
- Pull the deep-frying container out of the appliance by the handle.
- Place the deep-frying container on a heat-resistant surface.
- Fill the deep-frying container with the desired food.
- Push the deep-frying container back into the appliance. It must audibly click into place.
- Press the button to switch the appliance back to operating mode.
- Set the desired temperature and cooking time. Alternatively, select an automatic programmed (see next chapter).
- Press the button to start the cooking process.
- If necessary, shake the food halfway through the cooking time. To do this, pull out the deep-frying container by the handle. Then push the deep-frying container back into the appliance. The appliance continues operation at the interrupted point.
Automatic Programmes
- Select the automatic programmes by repeatedly pressing the button M .
- The automatic programme “Keep warm / Defrost” is selected with the button .
- The following table shows the factory preset temperatures in degrees Celsius (°C) and the minutes (min). The pre-settings are only guide values. Depending on the size and weight of the food, the temperature and time may have to be adjusted individually.
- The preset temperature and cooking time can be adjusted with the corresponding buttons and .
- Also observe the information on the food packaging.
Interrupting Operation
- Pull out the deep-frying container to interrupt operation. Replace the deep-frying container to resume operation.
- Operation can also be interrupted by pulling out the mains plug. Reconnect the mains plug to the socket to continue operation.
- The appliance resumes operation at the interrupted point. This also applies in the event of a power failure.
Ending Operation
- When the time has elapsed, OFF appears in the display. The fan runs briefly to cool down the appliance. Then 5 signal tones sound and the appliance switches to standby.
- You can also end operation prematurely by pressing the button .
- Pull out the deep-frying container by the handle.
- Put the food in a heat-resistant bowl.
- Push the deep-frying container back into the appliance.
- Unplug the appliance from the mains.
Cleaning
WARNING
- Always switch off the appliance and disconnect the mains plug from the socket before cleaning. Wait until the appliance has cooled down.
- Allow the sieve insert to cool down before removing it from the deep-frying container!
- Do not immerse the appliance in water! It could cause an electric shock or fire.
CAUTION : Non-stick coating
- Do not use a wire brush or other abrasive objects.
- Do not use harsh or abrasive cleaners.
- You can clean the sieve insert in warm rinse water with a little hand dishwashing liquid.
- Clean the inside and outside of the appliance and the deep-frying container with a slightly damp, not wet cloth.
- Also remove any food / grease residues on and next to the heating element with a slightly damp cloth. Do not switch the appliance on again until the heating element is completely dry!
Storage
- Clean the appliance as described. Allow the accessories to dry completely.
- We recommend storing the appliance in its original packaging if you do not intend to use it for a longer period of time.
- Always store the appliance out of the reach of children in a well-ventilated and dry place.
Troubleshooting
Problem | Possible Cause | Remedy |
---|---|---|
The appliance has no function. | The appliance has no power supply. | Check the |
power socket with another appliance.
Insert the mains plug correctly.
Check the house fuse.
The deep-frying container is not inserted correctly. A safety switch
prevents operation with an incorrectly inserted deep-frying container.| Insert
the deep-frying container correctly. It must audibly click into place.
The appliance is defective.| Contact our service or a specialist.
The food is not fully cooked.| The deep-frying container is overfilled.|
Reduce the amount of food. Smaller quantities cook more evenly.
The temperature is set too low.| Set a higher temperature.
The cooking time is set too short.| Set a longer cooking time.
The food is cooked unevenly.| The food is on top of each other. This
does not ensure sufficient air circulation.
| Shake the food halfway through the cooking time.
The food is not crispy.| You have used food that is only suitable for a
conventional deep fryer.| Use foods suitable for the oven or spread them with
a little oil.
Problem| Possible Cause| Remedy
---|---|---
Smoke is coming out of the appliance.| You are preparing very fatty food.|
Smoke may develop due to splashes of fat inside the appliance. Make sure there
is sufficient ventilation.
The deep-frying container is overfilled.
The food is touching the heating element.
| Reduce the amount of food.
There is still food / fat residue in the deep-frying container or on the
heating element from previous use.| Clean the appliance after each use as
described in the chapter “Cleaning”.
Technical Data
- Model:……………………………………………………..PC-FR 1269 H
- Power supply:……………………………….220 – 240 V~, 50 – 60 Hz
- Power consumption:…………………………………………….1800 W
- Protection class:…………………………………………………………….
- Net weight:………………………………………………….. approx. 6 kg
The right to make technical and design modifications in the course of
continuous product development remains reserved.
This appliance has been tested according to all applicable, current CE
directives and built according to the latest safety regulations.
Disposal
Meaning of the “Dustbin” Symbol
- Protect our environment: do not dispose of electrical equipment in the domestic waste.
- Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.
- This helps avoid the potential effects of incorrect disposal on the environment and human health.
- This will contribute to the recycling and other forms of reutilization of electrical and electronic equipment.
- Information concerning where the equipment can be disposed of can be obtained from your local authority. Your dealer and contractual partner is also obliged to take back the old appliance free of charge.
GARANTIEKARTE
warranty card
Industriering Ost 40 • 47906 Kempen Internet: www.proficook- germany.de Made in P.R.C.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>