Hair 600NM IPL Removal Device Laser User Manual
- June 16, 2024
- Hair
Table of Contents
- Use IPL hair removal device
- How Does IPL hair removal instrument works
- Use IPL hair removal device
- Switch screen display content
- Product gear adjustment introduction
- Manual hair removal mode:
- Automatic hair removal mode:
- Epilator package list
- IPL hair removal instrument preparation
- Testing method
- Choose the right light intensity
- Nursing measures
- IPL Hair Removal Considerations
- Precautions after hair removal
- Stress response of the skin after depilation
- Skin care after use
- IPL hair removal instrument after care
- Possible side effects
- How to safely use IPL hair removal device
- IPL Hair Removal Treatment Plan
- IPL hair removal device use part reference time
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Hair Removal Instrument
PB2 User Manual
Warning
During the 8 weeks of hair removal, the hair grows finer and thinner from the
beginning of use, and grows more slowly until it does not grow.In this
process, the razor should be used before each hair removal to keep the newly
grown hair as short as possible (at least less than 1MM). the shorter the
hair, the more energy the IPL delivers to the hair follicle, the more obvious
the effect!
Please read this manual carefully before using this product.
Use IPL hair removal device
iDi hair romoval ie ueod to romova ovcoee hair and normanonthe roduco hair oroudh Collow the method 1-3 times a week, after 4 weeks of use there will be a significant result of bair reduction. Applicable body parts: face (only for the chin), armpits, arms, legs, bikini lines, etc.
How Does IPL hair removal instrument works
The IPI hair romoval device is a nerconal ckin care annliance co it chould he uced with caution for safety reasons. Before using the IPL hair removal device for the first time, please carefully Read the user manual completely.
| During the operation of IPL technology, soft pulsed light illuminates the
skin and is absorbed by the hair roots. The darker the hair, the better the
absorption of light pulses.
---|---
| Light pulses stimulate the hair follicles into dormancy. Therefore, the hair
will naturally fall off, preventing hair from regenerating, and keep the skin
smooth.
| Hair growth cycle includes different stages, IPL technology is only
effective in the hair growth stage, not all hair is born at the same time
Long, so we recommend an 8-week treatment plan to trim the hair to ensure that
all hair is effectively illuminated during the growth phase.
Hypnotized hair follicles are absorbed by melanin in the hair| The hair sheds off and circulates naturally| Conventional use can inhibit hair regeneration
The built-in optical filter resists UV rays and enters the skin, ensuring that the product does not harm the skin.
Use IPL hair removal device
Epilator product parameters
Tube: | A+quartz tube |
---|---|
Light: | source technology |
Number of exposures: | 999,900 shots |
Product size: | 140mm X 57mm X 222mm |
Product net weight: | 323g |
Energy gear: | 5 adjustable |
How to use: | Connect to power supply |
Adapter Specifications: | Input AC100-240V Output DC12V 1.5A |
Working temperature: | 5°C-30° |
Switch screen display content
Product gear adjustment introduction
Power on: After powering the device, press the power button for 3 seconds
to turn it on.
Shutdown: In the power-on state, press the power button for 3 seconds to
shut down.
Gear position adjustment: In the power-on state, short press the power
switch to cycle and adjust 1-5 gears, the screen corresponding display 1-5.
The file is as follows (the default is 1 file, please adjust according to your
personal situation)
Manual hair removal mode:
After switching on the device, it will be on the manual hair removal mode,
please place the hairl removal device vertically on the area to be treated,
when the flashing mouth is completely in contact with the skin, the skin
contact indicator Display in flashing white, press the flash button to flash
the hair removal device.
( Note: In order to prevent false flashes, when the light exit port is not
completely fitted to thel skin, the skin contact indicator light display long
white, and the hair removal will not be possible.)
Automatic hair removal mode:
In the manual hair removal mode, long press the fash button, the screen will
display “AUTO” and enter the automatic hair removal mode. Please place the
hair removal device verticallv. I When in contact with the skin, when the
flashing mouth is completely close to the skin, it willl automatically flash
and depilate, each flash interval is about 1-3 seconds.
( Note: In order to prevent false flashes, hair removal will not be
possible when the flashingl mouth does not completely conform to the skin)
Epilator package list
IPL hair removal instrument preparation
Thoroughly clean the skin before use, shave the epilated area (keep it under
1mm) and make sure that the skin is hair-free, completely dry and free of oil.
No residual substances (perfume, lotion, body lotion, sunscreen, etc.), which
ensures that the light can reach the root of the hair in the most effective
way.
You can use razors or beeswax to remove hair, but do not use depilatories as
the chemicals can cause skin reactions.
Note: If the skin is not shaved or shaved during use, various undesirable
conditionsmav occur during light exposure.
- The dust in the hair may absorb light energy, which may cause skin pain or redness, and theforked hair or dust may pollute the light. Windows that block normal light output can result in reduced product life
- Residual hair on the skin may severely burn the epidermis.
If you choose to shave with a razor, be sure to shave to less than 1
millimeter. It is recommended to wipe the shaved area with a damp towel to
ensure no hair remains. (Please wait until the skin is dry before using IPL
hair removal device) If you choose to remove the hair with beeswax, please let
the skin rest a little and wait 24 hours before using the hair removal device.
I suggest you enter the Shower before the treatment to ensure that no wax is
left on the skin.
Note: Usually 4 to 5 sessions are completed. After the hair is no longer
reborn, you do
not have to deal with the skin before using the product.
Pre-use skin test
Before performing the instrument operation, skin test a small piece of your skin 2 hours in advance to check for adverse reactions.
Testing method
When using this product for the first time, select a small area inside the arm and test it in the low to high energy position within the tolerance range (in the same Light in the site 1 or 2 times); if redness,burns, changes in skin hair follicles, stinging or other discomfort occur within 2 hours after flashing, please stop using the product and consult a doctor . If there is no abnormality, but feel a strong sense of heat when using, use a lower energy level.
Do not use this product in the following areas
- Tanning skin
- There are infections, eczema, burns, hair follicle inflammation, open lacerations, wounds or lesions, and hematoma in the hair removal area.
- Dark brown or black skin such as black cockroaches and freckles (please refer to the skin color comparison table for details).
- Hemangioma.
- Cosmetic plastic surgery and surgical site.
- Around the eyes and near the eyebrows.
- Nipple, areola, labia minora, vagina, anus, and the inside of the nostrils and ears.
- For male users, do not use the product on the face or genitals.
- Blemishes, tattoos, or permanent make-up; otherwise it may cause burns in skin tone.
Choose the right light intensity
The instrument has 5 different energy intensities. You can choose the right
energy based on your skin type and the level of energy intensity you feel
comfortable with.
Quantity intensity setting. Please refer to the table below to select the
appropriate settings.
Skin type | Skin color | Energy intensity gear setting |
---|---|---|
I | white:extremely easy to sunburn,no sunburn. | 4/5 |
II | yellow:easy to sunburn, small sunburn. | 4/5 |
Ill | light brown:easy to sunburn, skin color will slowly dry to light brown. |
4/5
IV| brown:very little sunburn, ideal for sunburn.| 3/4
V| Dark brown:very little sunburn, skin condition is quite ideal| 1/2/3
VI| Dark brown or darker| you can’t use this product
Nursing measures
-
Before use, clean the light outlet, plug in the power supply with this product’s dedicated power adapter, and select the appropriate energy intensity according to your skin color.
-
Place the epilator on the skin at 90° to make the light exit completely close to the skin. Smart sensors prevent accidental flashes when there is no skin contact. (full contact with the skin indicator is flashing white).
-
Press the hair removal device against the skin to ensure proper contact between the light exit and the skin.
-
In the manual hair removal mode, each time the flash button is pressed, the product will emit a flash. You should feel the warmth of the flash.
-
In the automatic hair removal mode, as long as the light exiting to the skin is close to the skin, it will automatically flash.
It will automatically flash after about every 1~3 seconds. -
In order to ensure that all parts can be treated, please try to remove the hair immediately adjacent to the previous part.
However, please note that it is best to perform hair removal only once in the same part. Continuous depilation of more than two times in the same area does not improve the course of treatment, but increases the risk of adverse reactions to the skin.
Note: Wear sunglasses when using this product to effectively protect the eyes from possible damage caused by IPL pulse light; and please use in the middle of a well-lit room to reduce the glare caused by the flash.
IPL Hair Removal Considerations
- Do not look directly at the light exit when operating, or directly flash the eyes.
- This product should not be used in wet places! (If there is a bathtub with water, a shower or a pool with water).
- Do not allow children to use this product or use this product as a toy.
- If there is any stain on the filter lens of the light exit, it is forbidden to spray alcohol directly at the light exit.
- When using, do not apply any gelatinous cosmetics and gel water on the skin to avoid damage to the instrument.
- Try not to eat sensitive foods (such as spinach, rape, mustard, etc.) during energy.
- The debugging of the energy gear is weak to strong. The higher the energy, the better the effect without damaging the skin.
- Avoid ultraviolet radiation during use. If you are exposed to sunlight after use, please apply sunscreen or barrier to protect the skin after use.
- During use, it is strictly forbidden to block the air inlet and the heat dissipation hole to avoid affecting heat dissipation.
- At the end of the specified life, the illuminating tube will have different degrees of blackening around the tube. It is a normal aging process of the lamp and does not affect normal use.
- If the product casing is damaged or inadvertently soaked, please stop using it immediately, contact customer service staff for consultation.
- Except for authorized personnel of the company, no one should open the case, otherwise there will be danger of electric shock, and non-professionals are prohibited from performing maintenance.
Precautions after hair removal
- It is forbidden to use alcohol-containing irritating cosmetics after hair removal
- Do not use hot water above 50 °C to stimulate the skin of the hair removal area after hair removal.
- Strong exercise is prohibited after hair removal, so as to avoid strenuous exercise and sweating to stimulate the skin of the hair removal area.
- Please pay attention to sunscreen after hair removal, do not expose the skin of the hair removal site directly to the sun.
Stress response of the skin after depilation
Due to the different sensitivity of each person’s skin, some people may have
redness on the hair removal site and appear on the skin surface during the use
of the machine.
Red spots or a slight tingling sensation. These are all normal stress
reactions of the skin, which usually disappear within 24 hours after the end
of hair removal.
The skin has an effect. Scraping hair and pulsed light therapy may make the
skin dry and itchy, you can use ice water or ice towel for ice itching, or
moisturizing, if the skin is still dry, you can apply a fragrance-free
moisturizer to the treat ment area 24 hours after
the end of the treatment. If the above symptoms do not disappear within 2-3
days, please consult your doctor as soon as possible. If there is a strong
pain during use or after use, if the skin follicles are keratinized, red,
swollen, burned or otherwise unsuitable, stop using it immediately and consult
a doctor as soon as possible.
Skin care after use
After use, you can safely apply lotion, cream, body lotion and moisturizer to
the treatment area. if the skin is tingling or red and swollen after
application, please wait until these conditions have completely disappeared,
then apply any product on the skin.
If the skin has a tingling sensationil after applying the product, please wash
it off with water.
Note: Adverse reactions occur even after following all instructions. In
this case, please stop using this product, please contact the customer service
center in the area where you are Selling.
IPL hair removal instrument after care
-
It is recommended to avoid touching the water within 6 hours after the light operation.
The irrigated area can then be moisturized with moisturizing water. -
Do not use perfume, mask or cosmetics containing frosted beads after skin light.
-
Within 48 hours after the light operation, please avoid UV exposure. If necessary, please apply sunscreen.
-
If you feel unwell, please consult a surgeon.
-
Sunbathing may cause darkening or sunburn of the skin. Irradiation at this time may cause redness, inflammation, and the like. Therefore, during the use of this product, be careful not to expose to the sun, and the sunburn repair time is not less than 1 week.
Possible side effects
If shaving and light are applied, the skin is dry and itchy for a similar
period of time.
Please be assured that this reaction is harmless to the body and does not
require any medical attention, itl will disappear after a short period of
time, you can apply a mild and non-irritating moisturizer.
Problems and countermeasures of IPL hair removal instrument
IPL hair removal is based on the principle of “safety first” and IPL pulse
technology provides excellent safety and low energy levels.
Strong pulsed light technology enables long-term hair removal, resulting in a
small portion of this energy for other optical hair removal equipment, low
energy IPL hair removal.
Reduce possible injuries or complications and contribute to overall safety.
The IPL Hair Removal Instrument protects your eyes and skin! The IPL Hair
Removal has a built-in safety feature that protects the eyes. It is designed
as a skin.
The contact surface should be in contact with the skin to be able to flash.
The laser hair removal device does not operate for 10 minutes after being
turned on, and the device automatically shuts down and stops working.
Do not use IPL hair removal device under any of the following circumstances
Do not use the IPL hair removal device for certain conditions. Do not use this device if you have any of the following conditions;
- If you are pregnant or breastfeeding.
- If you have been exposed to the skin or artificial skin graft in the past 4 weeks
- If you have a tattoo or permanent episode in the area to be treated.
- If you have dark spots, such as freckles, birthmarks, and sputum in the area to be treated.
- If you have eczema, psoriasis, damage, bare wounds, or active infections, such as lip blister in the treatment area, use the device after the wound has healed.
- If you have a chronic medical condition.
- If you have a chronic skin disease (e.g. psoriasis or vitiligo) or damaged skin (e.g.sunburn, cuts, open wounds or active infections) in the areas you wish to treat.
- If you have varicose veins in the area you wish to treat.
- If you have a known sensitivity to sunlight (photosensitivity) or are taking medication that may make the skin more sensitive (e.g. Retin A, Accutane and/or other topical retinoids).
- If you have had a professional skin peel treatment on the area you wish to treat. If you take any kind of medication regularly and over a long period of time, pleaseconsult your physician for any potential impact on skin sensitivity to light.
- If your skin has been artificially or naturally tanned recently. Your skin may be sensitive following sunl exposure and particularly susceptible to side effects of IPL treatment (e.g. burn, blister, discolour or scar to vour skin).
- If you have some conditions, the doctor says that you are not suitable for hair removal treatment.
- If you are not sure if the laser hair removal device is safe for you, please consult your physician ordermatologist.
How to safely use IPL hair removal device
-
Carefully select the intensity level
The intensity level refers to the highest level of release from the use of flash to your skin. The brightness level of the gear indicator can be set on the instrument. As along as the intensity level increases, so does the risk of side effects. -
Please always use IPL hair removal device from low intensity level
If you don’t feel or feel very uncomfortable while using the IPL Hair Removal Level, you can raise one level at the next treatment. Analogy is used in future treatments. -
Avoid post-use complications
● Covering birthmarks and tattoos before use
● Cover dark brown or black spots before use, such as freckles, birthmarks, mole.
● Do not look directly at the device when light is emitted from the window.
● Please do not use this device on the nipple and reproductive organs (including males and females)
● Please do not use this device in places where you want long hair later.
● Please do not use this device for other purposes except for hair removal.
● Please do not use the flash in the open area. Please ensure that the skin contact surface is in full contact with the skin during the treatment.
● If the skin contact surface is too hot, remove the device from the skin.
● Do not use flammable liquids such as alcohol (including perfumes, disinfectants, or other substances that contain alcohol) or use Cyanella to cleanse the skin during use.
● Use of this device may cause temporary pigmentation changes
● Please keep this device away from children under the age of 18.
● Do not use this device on children under the age of 18.
IPL Hair Removal Treatment Plan
Treatment plan and effect
Anormal complete hair growth cycle can take 18-24 months. During this time, it
may be necessary to use IPL hair removal multiple times to achieve
Reduce or permanently remove hair. The effect of hair removal varies from
person to person, depending on the body, the color of the hair and how to use
the IPL hair removal device.
8 weeks to change and purify the skin
According to the hair growth situation, it can be used for 8 weeks.
1-3 weeks
2-3 times a week| 4-5weeks
2 times a week
---|---
|
The hair starts to fall off naturally and the hair is greatly reduced.|
Newborn long-term hair loss and inhibit growth to maintain tender skin!
6-7weeks
Once a week| After 8 weeks,
once every half month
|
The hair becomes thinner and less, no longer rebounds, keeping the body smooth
and tender!| Depending on the state of hair growth, you can use it
selectively, and say goodbye to repeated hair removal!
IPL hair removal device use part reference time
Note: It is recommended that the using times of different types of skin be different. Thelower part of the skin and the lighter skin can be removed twice in a row. It is not recommendedto remove hair continuously in the deeper limbs and skin color. If the skin has a reddish feelingof uniform warmth during using, stop this part of the using.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>