aodelan ZC-4 Remote Controller User Manual
- August 27, 2024
- AODELAN
Table of Contents
- ZC-4 Remote Controller
- Product Specifications:
- Product Usage Instructions:
- 1. Installing Batteries:
- 2. Connecting to a Camcorder:
- 3. Powering On:
- Q: What should I do if the Remote Controller screen displays a
- Q: How do I know if I can operate the camcorder through the
- Q: What should I do if I encounter interference while using the
ZC-4 Remote Controller
“`html
Product Specifications:
- Product name: Remote Controller
- Trade name: AODELAN
- Model number: ZC-4
- TX FCC ID: 2AEJW-ZC4
- IC: 25192-ZC4
- Manufacturer: Shenzhen Aodelan Technology Co., Ltd.
Product Usage Instructions:
1. Installing Batteries:
-
Open the battery compartment cover.
-
Install two AA 1.5V batteries (available separately) as
shown. -
Close the cover.
2. Connecting to a Camcorder:
-
Place the Remote controller in a safe location, and ensure the
camcorder is turned off. -
Connect the jack of the remote cable to one of the camera
connectors (CAMERA1 to CAMERA3) on the top of the Remote
controller. -
Insert the plug of the remote cable into the camcorder’s REMOTE
or LANC terminal.
3. Powering On:
- Turn on the camcorder.
- Slide the ON/OFF switch on the Remote Controller to ON
position.
Frequently Asked Questions (FAQ):
Q: What should I do if the Remote Controller screen displays a
number icon?
A: When a number icon is displayed on the
Remote Controller’s screen, it indicates that a wired connection
has been established with the camcorder.
Q: How do I know if I can operate the camcorder through the
Remote Controller?
A: When the status LED on the top of the Remote
Controller lights up in green, it signifies that you can operate
the camcorder using the Remote Controller.
Q: What should I do if I encounter interference while using the
Remote Controller?
A: Reorient or relocate the receiving antenna,
increase separation between equipment and receiver, and connect
equipment to a different circuit. Consult a dealer or technician if
needed.
“`
Remote Controller User Manual
ZC-4
Thank you for purchasing an AODELAN product.
AODELAN ZC-4 contains a Remote Controller and a Receiver. It was especially
developed to wirelessly operate compatible Sony camcorders from a distance. By
simply connecting the Receiver to the REMOTE or LANC terminal (2.5mm) on the
camcorder and turning on the Remote Controller, you can easily operate many of
the camcorder’s functions wirelessly. Wired control of these functions can
also be achieved by connecting the Remote Controller directly to the camcorder
with the supplied remote cable. Wired control and wireless remote control can
be performed simultaneously to enable simultaneous operation of multi
camcorders.
Please read this user manual as well as the user manual provided with your camcorder which works with ZC-4 before use.
For your safety Before using your product, please read the following safety
precaution carefully to ensure correct and safe use.
Do not disassemble or attempt to repair it. Do not use the product in the
presence of flammable or explosive gas. The product is not dustproof, splash
proof, nor waterproof. Make sure that no water, liquid, or dust can enter the
product. Do not expose the product to hasty temperature changes in humid
conditions as this could lead to condensation water in the unit. Do not expose
the product to high temperature over 45 (e.g. left in a car trunk). Do not use
organic solvents such as alcohol, benzine or paint thinner to clean the
product. Do not connect the product to camcorders or other devices that are
not compatible.
Declaration of Conformity USA and Canada
Getting Started
Installing batteries to the Remote Controller 1. Open the battery compartment
cover. 2. Install two AA 1.5V batteries (available separately) as shown. 3.
Close the cover.
Connecting to a camcorder (Supports both wired and wireless connections)
Wired connection by connecting the Remote Controller to the camcorder with
the supplied remote cable.
1. Place the Remote controller in a safe location, and check that the
camcorder is turned off.
2. Connect the jack of the remote cable to one of the camera connectors
(CAMERA1 to CAMERA3) on the top of the Remote controller.
3. Insert the plug of the remote cable into the camcorder’s REMOTE or LANC
terminal.
Jack
Plug
Cable gurad bar
Product name: Remote Controller Trade name: AODELAN Model number: ZC-4 TX FCC ID: 2AEJW-ZC4 IC: 25192-ZC4 Manufacturer: Shenzhen Aodelan Technology Co., Ltd.
Product name: Receiver Trade name AODELAN Model number ZC-4 RX Manufacturer: Shenzhen Aodelan Technology Co., Ltd.
FCC Statement This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between
the equipment and receiver. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. Consult the dealer or
an experienced radio/TV technician for help.
[Notes] Pass the jack of the remote cable through the cable guard bar when
connecting it. Insert the jack of the connection cable in all the way. Fix and
group the cable to the cable guard bar by using the cable clamp or the like,
if necessary. Refer to the user manual of the camcorder for the location of
the REMOTE or LANC terminal on the camcorder.
Example
Cable clamp
Remote Cable
4. Turn on the camcorder and slide the ON/OFF switch on the Remote
Controller to”ON”position.
[Notes] When a number icon is displayed on the Remote Controller’s screen, it
indicates that a wired connection has been established. When the status LED on
the top of the Remote Controller lights up in green, you can operate the
camcorder through the Remote Controller.
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable exposure condition
without restriction.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
IC Warning This device complies with RSS Gen of the Canada Rules. Operation is
subject to the following two conditions: 1) this device may not cause
interference and 2) this device must accept any interference, including
interference that
may cause undesired operation of the device.
Radiation Exposure: This equipment complies with Canada radiation exposure
limits set forth for an uncontrolled environment.
Avertissement IC Cet appareil est conforme aux règles RSS Gén du Canada. Le
fonctionnement est soumis aux deux suivants conditions: 1) cet appareil ne
doit pas causer d’interférences et 2) cet appareil doit accepter toutes les
interférences, y compris celles pouvant
causer des effets indésirables fonctionnement de l’appareil.
Exposition aux radiations: Cet équipement est conforme à la réglementation
canadienne sur les radiations. limites d’exposition établies pour un
environnement non contrôlé.
RED 2014/53/EU Declaration of Conformity EC
Hereby, Shenzhen Aodelan Technology Co., Ltd. declares that this product is in
compliance with essential requirements and other relevant provisions of
Directive 2014/53/EU. This product can be used across EU member states. A copy
of the Declaration of conformity can be found at www.aodelan.net.
1
2
3
The above indicates that CAMERA1 connector of the Remote Controller has
established a wired connection with a camcorder. If CAMERA2 ( and / or
CAMERA3) connector(s) is also connected to a camcorder, the number icon
( and / or ) will be displayed on the screen at the same time; When the status
LED 2 (and / or 3) on the top of the Remote Controller lights up in green, you
can operate the second (and/or the third) camcorder simultaneously through the
Remote Controller.
Wireless connection – by connecting the Receiver to the camcorder.
1. Be sure the camcorder is turned off; insert the plug of Receiver into the
camcorder’s REMOTE or LANC terminal.
2. Place the Remote controller in a safe location. Turn on the camcorder and
slide the ON/OFF switch on the Remote Controller to”ON”position.
[Notes] When a wireless icon is displayed on the Remote Controller’s screen, it indicates that a wireless connection has been established. When the wireless connection status LED on the top of the Remote Controller lights up in green, you can wirelessly control the camcorder through the Remote Controller.
1
2
3
Setting the shooting state of the camcorder For details, refer to the
camcorder’s user manual.
Depending on the camcorder used, you may need to active the remote controller
using the camcorder’s menu.
Canceling automatic adjustment of the camcorder’s shooting state. [Note] The
switches used to turn on/off automatic adjustment of the shooting state on the
camcorder vary depending on the camcorder (for example, FULL AUTO switch,
AUTO/MANUAL switch). If the camcorder has a ZOOM switch, set it to SERVO or
REMOTE mode. If using an interchangeable lens type camcorder with the supplied
lens, set the focus ring to electronic control. If using a lens other than the
supplied lens, focusing may not be supported from this unit. If the camcorder
is an interchangeable lens type, set the IRIS switch on the lens to auto
adjustment (AUTO).
Attaching to a pan rod
You can attach the Remote Controller to the pan rod of a tripod, or similar
object, using the supplied attachment plate. When attaching the Remote
Controller to a pan rod, place a non-stepped portion of the pan rod against
the back of the Remote Controller.
Non-stepped portion of pan rod against back of Remote Controller
[Notes] If using commercially available screws in the screw holes on the back of the unit, use M5 screws. Do not tighten the attachment plate screws more than required. Doing so may cause damage.
Location of Parts and Basic Operations
Remote Controller
[Note] This Remote Controller cannot perform two or more remote control
actions simultaneously. Always perform one action at a time.
Control Panel
1
2
25 26 27 28
CAMERA
3
PRESET
A
B
WB SET
SELECT
GAIN
WHT BAL SHUTTER
29 30 31 32
1
2
3
4
PRESET
A
B
WB SET
HOLD
5
SELECT
GAIN
WHT BAL SHUTTER
A/M IRIS
6
THUMBNAIL
MENU
20 21 22
SET
7
DISPLAY
CANCEL/BACK
THUMBNAIL
MENU
ASSIGN
A/M ND
8
1
2
3
SET
19
9
DISPLAY
CANCEL/BACK
4
5
6
23
24 18
A/M FOCUS
10
11
15 16 17
14
REC START/STOP
12
6. IRIS A/M key Press to toggle auto iris adjustment on/off.
7. IRIS adjustment knob Turn to adjust the iris. Pressing the center of the
adjustment knob temporarily activates auto iris adjustment (PUSH AUTO IRIS).
Auto iris adjustment stops when you remove your finger from the adjustment
knob during PUSH AUTO IRIS.
[Note] The iris adjustment level obtained by the rotation and speed of the
knob will vary depending on the menu setting of the Remote Controller as well
as camcorder being used.
8. ND A/M key
If the connected camcorder has an electronically switchable ND filter auto
adjustment function, press this key to toggle auto adjustment on/off.
9. ND adjustment knob
Turn to adjust the ND filter density.
[Notes] The ND filter of the camcorder must be set to an adjustable state (set
to a position other than CLEAR or set to VARIABLE mode). For details, refer to
the operating instructions for the camcorder. When [ND MODE] is set to [Dial]
in the menu of Remote Controller, you can adjust the function assigned to the
assignable dial of the video camera, instead of the ND filter. Camcorders that
do not have an assignable dial or electronically switchable ND filter function
cannot be controlled using this function.
10. FOCUS A/M key Press to toggle auto focus adjustment on/off.
11. FOCUS adjustment knob
Turn to adjust the focus. Pressing the center of the adjustment knob
temporarily activates auto focus adjustment (PUSH AUTO FOCUS). Auto focus
adjustment stops when you remove your finger from the adjustment knob during
PUSH AUTO FOCUS
[Note] The focus adjustment level obtained by the rotation and speed of the
knob will vary depending on the menu setting of the Remote Controller as well
as camcorder being used.
12. ON/OFF switch Slide the switch to turn on/off the Remote Controller.
13. ZOOM lever
Turn left/right to adjust the zoom. [Note] If the camcorder has a ZOOM switch,
set it to SERVO or REMOTE mode.
When the Remote Controller enters the setup menu, you can select the
previous/next item by turning the ZOOM lever left/right.
14. REC START/STOP key
Press to start recording.
To stop recording, press the REC START/STOP key again.
During recording, corresponding status LED lights up in red, the number
icon or wireless icon on the Remote Controller’s screen turns into
/
/
or
.
15. 16. 17. 18. (See Chapter “Remote Controller’s Screen and Menu Settings”
for details.)
19. ASSIGN key Press to recall the function assigned to the ASSIGN button of
the camcorders. For details, refer to the operating instructions for the
camcorder.
29. SELECT key You can change the mode of the gain recalled using the GAIN
key. * Depending on the camcorder, you can change the gain by pressing the
up/down arrow keys.
[Note] On camcorders with a GAIN lever switch, or similar switch, that has a
switch position indicator, the setting will change to the switch position
setting of the camcorder if the connection cable is disconnected and
reconnected or the video camera is turned off and on again.
30. GAIN key Press to recall the gain setting configured on the camcorder.
31. WHT BAL key Press to set manual white balance adjustment and recall the
setting on the camcorder. Press again to return to auto adjustment.
For details, refer to the operating instructions for the camcorder.
32. SHUTTER key
Press to turn off auto adjustment, and recall the shutter or shutter speed
settings. You can change the shutter mode by pressing the up/down arrow keys.
- Depending on the camcorder, the shutter change mode is recalled.
Connector Panel
1 2 3 45
6
1. CAMERA1 connector (Ø2.5 stereo mini plug) 2. CAMERA2 connector (Ø2.5 stereo mini plug)
3. CAMERA3 connector (Ø2.5 stereo mini plug)
4. OPTION connector (Ø3.5 stereo mini jack)
Used to connect the Remote Controller with an MCX-500. The connection cable is
supplied with the MCX-500.
5. REMOTE connector (Ø2.5 stereo mini jack)
This connector is used for daisy chain connections. Connect to another Remote Controller to control the connected camcorders using two Remote Controllers.
6. USB Type-C connector
Used for firmware update (when necessary). Go to www.aodelan.net to download the latest firmware update package for ZC-4, update your ZC-4 to the latest firmware according to the provided update files. Can also be used to connect to an external power supply (5V) to power the Remote Controller.
Back
1
1. Cable guard bars
2. Sockets for mounting screws
(Refer to the Chapter “Attaching to
2
a pan rod”.)
3. Battery compartment cover
Two AA 1.5V batteries can be installed
in the battery compartment.
3
13
1. Wired connection status LEDs Display the wired connection status of the Remote Controller.
Display
Description
Light up in green
Connected to a camcorder, which is selected as a target for remote control.
Blinking green Camcorder is in automatic adjustment mode.
Light up in red Camcorder is recording.
Blinking red
The remaining battery capacity or remaining recording time of the camcorder is getting low.
Light off
Camcorder is turned off or disconnected, or is not selected.
2. Camera selector keys (wired connection)
Press to select the camcorders connected to the CAMERA1 to CAMERA3 connectors
as the targets for remote control. You can select more than one camcorder.
[Note] When the Remote Controller is connected to an MCX-500 Multi Camera Live
Producer for remote control of camcorders from the MCX-500, camcorders that
are not selected as the remote control target (corresponding status LED is not
lit) are also remote controlled.
3. Wireless connection status LED
Display the wireless connection status of the Remote Controller. (The status
display and description are the same as that of Part 1.)
4. Wireless connection selector key Press to select the camcorder connected
to the Receiver as the target for remote control. You can select it
simultaneously with the wired connected cameras.
5. HOLD key Press to toggle HOLD state on/off. Backlight of HOLD key lights
up: HOLD state is on. Now, all operations on the Remote Controller except the
ON/OFF switch are locked and the camcorder is no longer controlled by the
Remote Controller.
[Note] Icon is displayed on the Remote Controller’s screen. The HOLD key
backlight will blink when any function is operated on the Remote Controller.
No backlight for HOLD key: HOLD state is off.
20. THUMBNAIL key Press to display the thumbnail screen. Press again to
dismiss the thumbnail screen.
21. SET & Arrow keys Use the arrow keys to move the cursor up/down/left/right
on the menu screen of the camcorder or to change a value on an edit setting
screen. Press the SET key to apply the selected item or to execute a function.
- Left/right operation may not be applicable, depending on the camcorder being
used. For details, refer to the operating instructions for the camcorder.
22. MENU key Press to display the menu on the camcorder screen. Press again to dismiss the menu screen.
23. DISPLAY key Press to toggle between the on-screen display (OSD) screens.
24. CANCEL/BACK key Cancels a setting before it is applied, or moves one level up in the menu hierarchy.
25. PRESET key Press to recall PRESET. For details about changing/switching settings, refer to the operating instructions for the camcorder
26. A key Press to recall the setting stored in WB SET A (memory A).
27. B key Press to recall the setting stored in WB SET B (memory B).
28. WB SET key When a white balance setting is being configured for WB SET A or WB SET B, press the WB SET key to store the WB SET A or WB SET B setting, whichever is selected. For details, refer to the operating instructions for the camcorder.
[Note] On camcorders with a PRESET/A/B lever switch, or similar switch, that has a switch position indicator, the setting will change to the switch position setting of the camcorder if the remote cable is disconnected and reconnected or the video camera is turned off and on again.
Receiver
2 1
3
1. Plug (Ø2.5 stereo mini plug)
Connect to the camcorder’s REMOTE or LANC terminal. After the camcorder is
turned on, the Receiver connected to the camcorder will automatically
establish a wireless connection with the paired Remote Controller.
2. Status lamp
When the Receiver is connected to a camcorder that is powered on, the lamp
indicates the wireless connection status of the Receiver and Remote
Controller. Blinking green indicates that a wireless connection has been
established with a Remote Controller. Blinking red indicates that no wireless
connection is established with a Remote Controller. Now, you need to operate
the Remote Controller to pair with the Receiver.
(NEXT) until [PAIR MODE]
(SET), [Y] will appear
(SET) again to confirm the pairing operation.
- Then, the Remote Controller will enter the pairing mode and automatically search for and pair with the Receiver.
When the Receiver is not connected to a camcorder or the connected camcorder is powered off, the lamp lights off.
3. USB Type-C connector
Used for firmware update (when necessary). Go to www.aodelan.net to download
the latest firmware update package for ZC-4, update your ZC-4 to the latest
firmware according to the provided update files.
Remote Controller’s Screen and Menu Settings
18 15 16 17
1,ZOOM DIRECT R 2,ZOOM SPEED 3 3,IRIS SPEED 2 NEXT EXIT SET
A/M FOCUS
15. Remote Controller menu
key (NEXT)
When the Remote Controller enters the setup menu, press this key to
select the next item.
16. Remote Controller menu
key
Press to enter/exit the Remote Controller’s setup menu. [Notes]
When the Remote Controller enters the setup menu, the camcorder is no longer
controlled by the Remote Controller. If there is no menu setting operation for
10 seconds after entering the setup menu,
the Remote Controller will automatically exit the menu.
17. Remote Controller menu
key (SET)
When the Remote Controller enters the setup menu, press this key to switch and confirm the settings.
18. Screen
Displays the current status of the Remote Controller.
Main interface status
A/M FOCUS
Display Description
CAMERA1 connector has established a wired connection with a camcorder.If the camcorder is recording a video, is displayed here. If the connection is disconnected, nothing is displayed here.
CAMERA2 connector has established a wired connection with a camcorder. If the camcorder is recording a video, is displayed here. If the connection is disconnected, nothing is displayed here.
CAMERA3 connector has established a wired connection with a camcorder. If the
camcorder is recording a video, is displayed here. If the connection is
disconnected, nothing is displayed here.
A wireless connection has been established on the Remote Controller. If the
camcorder is recording a video,
is displayed here. If the connection is disconnected, nothing is displayed
here.
Current battery level of the Remote Controller, only displayed when no wired connection is established on the Remote Controller.
- If the icon (or
is displayed, it indicates the battery level is
low (or extremely low), replace the batteries with new ones for the
Remote Controller.
When a wired connection is established on the Remote Controller, the connected camcorder supplies power to the Remote Controller, nothing is displayed here.
Displayed when operating a function of the camcorder on the Remote Controller. is displayed here when HOLD state is on. is displayed here when the Remote Control is in sleep state.
ZC-4
Displayed when the Remote Controller is turned on and no connection has been established.
Enter the setup menu
1,ZOOM DIRECT R 2,ZOOM SPEED 3 3,IRIS SPEED 2 NEXT EXIT SET
A/M
1. Press key to enter the Remote Controller’s setup menu. 2. Setup menu
operations.
Move the selection arrow to the desired menu item by pressing key (NEXT) or
turning ZOOM lever.
Press key (SET) to change the settings.
3. To exit the menu, press key (now functions as “EXIT”). If there is no menu
operation for 10 seconds, the Remote Control will exit the menu automatically.
[Note] When the Remote Controller enters the setup menu, the camcorder is no
longer controlled by the Remote Controller.
Menu settings
No. Menu item
Options
To set
1 ZOOM DIRECT N(Normal)/R(Reverse) zoom rotation direction.
2 ZOOM SPEED 1/2/3
zoom adjustment speed.
3 IRIS DIRECT
N(Normal)/R(Reverse) IRIS rotation direction.
4 IRIS SPEED
1/2/3
IRIS manual adjustment speed.
5 FOCUS DIRECT N(Normal)/R(Reverse) focus rotation direction.
6 FOCUS SPEED 1/2/3/4/5
focus manual adjustment speed.
7 ND DIRECT
N(Normal)/R(Reverse) ND rotation direction.
8 ND MODE
ND/Dial(Assignable dial) ND mode.
9 SLEEP
10M/1H/4H/OFF
the Remote Controller to go into sleep mode after how long it has been idle.
10 PAIR MODE
Y(Yes)
11 RESET ALL
Y(Yes)
the Remote Controller to pair with the Receiver. When the option “Y” is
displayed, press the key (SET) to confirm the setting, then the Remote
Controller will enter pairing mode and automatically search for the Receiver
and pair with it.
the Remote Controller to restore factory settings. When the option “Y” is
displayed, press the key (SET) to confirm the setting, then all settings on
the Remote Controller will be restored to the factory settings.
12 VERSION VX.XX
The current firmware version of the RemoteController.
Connecting to Multiple Camcorders
Up to four camcorders can be connected to the Remote Controller simultaneously.
Camcorder 1
Camcorder 2
Camcorder 3
Camcorder 4
Connect the camcorder to the CAMERA1 to CAMERA3 connector via the remote
cable, or connect the camcorder wirelessly via the Receiver, and then select
the camcorders to control using the camera selector keys (or wireless
connection selector key). You can select and control multiple camcorders
simultaneously.
[Notes] Turn off each camcorder before connecting and disconnecting the
camcorder. When controlling multiple camcorders simultaneously, the time taken
for the camcorders to respond may not be the same. For example, when the REC
START/ STOP key is pressed to start recording simultaneously, the actual
recording start timing may differ by several frames.
Connecting in Daisy Chain
You can control the connected camcorders using two Remote Controllers by connecting another Remote Controller to the REMOTE connector of the Remote Controller connected to the camcorder.
Camcorder 1
Camcorder 2
Camcorder 3
Camcorder 4
REMOTE
CAMERA 1~3 connector
Remote Controller 1
Remote Controller 2
1. Connect the Remote Controller 1 to the camcorder(s) (via wired
connection(s) or wireless connection).
2. Connect one of the CAMERA1 to CAMERA3 connectors on Remote Controller 2 to
the REMOTE connector on Remote Controller 1.
[Notes] This type of connection cannot be used if the camcorder used does not support the daisy chain function. For details about remote control functions supported by each camcorder, contact your Sony dealer. Only two Remote Controllers can be daisy-chained. Do not connect anything to the REMOTE connector on Remote Controller 2. Turn off each camcorder before connecting and disconnecting the camcorder. Do not connect any device other than AODELAN ZC-1, ZC-3 Remote Controller, ZC-4 Remote Controller or Hanpusen ZC-2 to the REMOTE connector. If Remote Controllers 1 and 2 are operated simultaneously, the operation on one of them will be ignored.
Specifications
Wireless communication
Frequency
2.4GHz
Remote control range (Approx.)
50 m (164 ft.) (Open space without interference)
Remote Controller (Model: ZC-4 TX)
Dimensions (Approx.)
208x88x45mm (8.2×3.5×1.8 in.) (Remote Controller body only, excluding attachment plate, remote cable.)
Weight (Approx.)
Usage environment
310 g (10.9 oz) (Excluding battery, attachment plate, remote cable.) Temperature: 0 to 40 (32°F to 104°F); Humidity: 80% or lower
Connector
Screen Zoom lever Power source
Ø2.5 stereo mini plug x3 (CAMERA1, 2, 3 connectors), Ø2.5 stereo mini jack x1
(REMOTE connector), Ø3.5 stereo mini jack x1 (OPTION connector), USB Type-C
connector x1
OLED screen, 1.3″
Support pressure-sensitive
Two AA 1.5V batteries / Supplied by the camcorder (when a wired connection is
established with the camcorder) / Supplied by an external power supply (when
the USB Type-C connector is connected to an external power supply)
Receiver (Model: ZC-4 RX)
Dimensions (Approx.) Weight (Approx.) Usage environment
Connector
Power source
40x20x10mm (1.6×0.8×0.4 in.) (Receiver body only), Cable length 50mm 8 g (0.3
oz)
Temperature: 0 to 40 (32°F to 104°F); Humidity: 80% or lower
Ø2.5 stereo mini 90° plug x1, USB Type-C connector x1 Supplied by the
connected camcorder
Specifications and design are subject to change without notice. “Sony” mentioned in the manual is a protected trademark which does not belong to Shenzhen Aodelan Technology Co., Ltd.
ZC-4
1
2
3
1
2
3
25 26 27 28
PRESET
A
B
WB SET
SELECT
GAIN
WHT BAL SHUTTER
29 30 31 32
1
2
CAMERA
1
PRESET
2
3
A
B
WB SET
HOLD
SELECT
GAIN
WHT BAL SHUTTER
THUMBNAIL
MENU
A/M IRIS
20 21 22
THUMBNAIL
MENU
DISPLAY
SET
CANCEL/BACK
19
23
24 18
DISPLAY
SET
CANCEL/BACK
ASSIGN
1
2
3
A/M ND
4
5
6
A/M FOCUS
3 4 5 6 7 8 9 10 11
15 16 17
14
REC START/STOP
12
13
1 2 3 45
6
1. CAMERA1 2. CAMERA2 3. CAMERA3 4. OPTION
MCX-500 5. REMOTE
Ø2.5, Ø2.5, Ø2.5, Ø3.5, MCX-500
Ø2.5,
6. USB Type-C
18 15 16 17 15
16
1,ZOOM DIRECT R 2,ZOOM SPEED 3 3,IRIS SPEED 2 NEXT EXIT SET
A/M FOCUS
17. 18.
A/M FOCUS
1 ZC-4
2
3
1,ZOOM DIRECT R 2,ZOOM SPEED 3 3,IRIS SPEED 2 NEXT EXIT SET
A/M
REMOTE
2.4GHz
2 3
Ø2.5,
1
1 ZOOM DIRECT N
/R
2 ZOOM SPEED 1/2/3
3 IRIS DIRECT
N
/R
4 IRIS SPEED
1/2/3
5 FOCUS DIRECT N
/R
6 FOCUS SPEED 1/2/3/4/5
7 ND DIRECT
N
/R
8 ND MODE
ND/Dial
9 SLEEP
10M
/1H
4H
/OFF
10 PAIR MODE
Y
11 RESET ALL
Y
12 VERSION VX.XX
40x20x10mm ( 8 g
);
50mm
Shenzhen Aodelan Technology Co., Ltd.
Printed in China
2024.05
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>