SONY XR-75X90J Smart TV User Guide

XR-75X90J Smart TV
User Guide

Read this manual before using this product
Sony Customer Support
U.S.A.: https://www.sony.com/tvsupport
Canada: https://www.sony.ca/support
United States
Canada
1.800.222.SONY 1.877.899.SONY
Call the telephone number that appears on your warranty card/policy.
Please do not return the product to the store.

About Manuals

This TV comes with the following manuals. Please retain the manuals for future reference.

Setup Guide

• TV installation and setup.

Reference Guide (this manual) / Safety Documentation

• Safety information, remote control, troubleshooting, wall-mount installation, specification, etc.

Help Guide (On-screen Manual)

• Settings, functions, Internet connection, troubleshooting, etc.

• To open it, press the HELP button on the remote control and select Help Guide.

• You can refer to the Help Guide with your smartphone.

https://rd1.sony.net/help/tv/iusltn1/h_usltn/

Setting menus are subject to change without notice.
IMPORTANT – Read the End User Software License
Agreement before using your Sony product. Using your product indicates your acceptance of the End User Software License Agreement. The software license agreement between you and Sony is available online on the Sony website (https://www.sony.net/tv-software-licenses/) or on your product screen. Press (Quick Settings) on the remote control and select [Settings] → [System] → [About] → [Legal information] →[End user license agreement].

Note
• Images and illustrations used in the Setup Guide and this manual are for reference only and may differ from the actual product.
The 75″ class has a 74.5 inch (189.3 cm) viewable image size, the 65″ class has a 64.5 inch (163.9 cm) viewable image size, the 55″ class has a 54.6 inch (138.8 cm) viewable image size and the 50″ class has a 49.5 inch (125.7 cm) viewable image size (measured diagonally).

Location of the identification label

Labels for the TV Model No. and Power Supply rating are located on the rear of the TV.

IMPORTANT NOTICE

Owner’s Record
The model and serial numbers are located at the side and/or rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this TV.
Model Name
Serial No.

IMPORTANT NOTICE FOR MEXICO
The operation of this equipment is subject to the following two conditions: (1) it is possible that this equipment or device may not cause harmful interference and (2) this equipment or device must accept any interference, including interference that may cause undesired operation. For information related to the certificate number, refer to the package label and/or product.
Note: This product uses the following module for wireless functionalities:
Model: DHUR-SY63
Brand: Wistron NeWeb Corporation
CAUTION
To prevent electric shock and blade exposure, do not use this AC plug with an extension cord, receptacle, or another outlet unless the blades can be fully inserted.

• Operate the TV only on 110 V – 240 V AC (U.S.A./Canada 120 V AC).
  Note

• This television includes a QAM demodulator which should allow you to receive unscrambled digital cable television programming via subscription service to a cable service provider. The availability of digital cable television programming in your area depends on the type of programming and signal provided by your cable service provider.

Safety Information

Notice for customers in the United States of America
Supplier’s Declaration of Conformity
Trade Name: SONY
Model: XR-75X90J / XR-75X90CJ / XR-65X90J /
XR-65X90CJ / XR-55X90J / XR-55X90CJ / XR-50X90J
Responsible Party: Sony Electronics Inc.
Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230

FCC Related Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit
  different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Pursuant to FCC regulations, you are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Safety and Regulatory

5 GHz bands are restricted to indoor operations only.
Notice for customers in Canada
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its  transmit antenna) that is installed outdoors is subject to licensing.
High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.

Notice for customers in the United States of America and Canada
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and
RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from the person’s body (excluding extremities: hands, wrists, feet, and ankles).
This device and its antenna(s) must not be co-located or operating with any other antenna or transmitter except Grant condition.

Compatible Wall-Mount Bracket Information
Use the following Sony Wall-Mount Bracket with your TVmodel.
Sony Wall-Mount
Bracket Model No.
Sony TV Model No.
XR-75X90J / 75X90CJ / 65X90J /65X90CJ / 55X90J / 55X90CJ SU-WL855
Use with other Wall-Mount Brackets2 may cause instability and could result in property damage or injury.
1 Only on limited region/country/TV model.
2 For instructions on using the Wall-Mount Bracket with your TV please go to https://www.sony.com/am/support for your TV model and download “Wall-Mount Bracket”.
To Customers
Sufficient expertise is required for TV installations. Be sure to subcontract the installation to a Sony dealer or licensed contractor and pay adequate attention to safety during the
installation.
Before setting up your TV
Some TV models are packaged with a detached Table-Top Stand so you can mount your TV to a wall right away. See “Installing the TV to the Wall” if you want to mount the TV to a wall. If you are not mounting the TV to a wall, you will need to attach the Table-Top Stand (refer to the Setup Guide).
Be sure to consider the following while setting up your TV:

• Disconnect all cables when carrying the TV.

• Carry the TV with an adequate number of people; larger size TVs require two or more people.

• Correct hand placement while carrying the TV is very important for safety and to avoid damage.

• Ensure your TV has adequate ventilation, refer to this safety documentation.

• For best picture quality, do not expose the screen to direct illumination or sunlight.

• Avoid installing the TV in a room with reflective walls and floor materials.

• Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may cause moisture condensation. This may cause the TV to show poor pictures and/or poor color. Should this occur, allow moisture to evaporate completely before powering the TV on.

Securing the TV

Sony strongly recommends taking measures to prevent the TV from toppling over.
Unsecured TVs may topple and result in property damage, serious bodily injury or even death.

Preventing the TV from Toppling

• Secure the TV to a wall and/or Stand.

• Do not allow children to play or climb on furniture and TV sets.

• Avoid placing or hanging items on the TV.

• Never install the TV on:
  – slippery, unstable, and/or uneven surfaces.
  – furniture that can easily be used as steps, such as a chest of drawers.

• Install the TV where it cannot be pulled, pushed, or knocked over.

• Install the TV so that the TV’s Table-Top Stand does not protrude out from the Stand (not supplied). If the
  Table-Top Stand protrudes out from the Stand, it may cause the TV set to topple over, fall down, and cause personal injury or damage to the TV.

• Route all AC power cords and connecting cables so that they are not accessible to curious children.

Recommended Measures to Secure the TV

Consider the following measures when securing your TV to a Stand (not supplied).
1 Secure the Stand for the TV.
Make sure the Stand can adequately support the weight of the TV. Use two angle braces (not supplied) to secure the Stand. For each angle, brace use the appropriate hardware to:

• Attach one side of the angle brace to the wall stud.
• Attach the other side to the Stand.

Secure the TV to the Stand.
Use the optional hardware listed as follows (not supplied):

• M6 machine screws (screwed in to the TV’s rear cover).
• A screw or similar (attach it to the Stand).
• Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slack in the rope or chain.

The length of the M6 machine screw differs depending on the rope or chain diameter. Please refer to the below illustration.

Anchor the TV to the wall by using bolts, a wall anchor, and a chain (or rope).

Note

• Your TV is shipped with screws attached to the rear of the TV depending on the TV model. (They are fastened in the screw holes for wall mounting.) Be sure to remove the upper two screws prior to anchoring the TV to a wall.
• Securing the TV to the Stand without securing the TV and the Stand to the wall provides minimum protection against the TV toppling over. For further protection, be sure to follow the three measures recommended.

The BRAVIA® 4K TV Experience
Thank you for choosing Sony! Your new BRAVIA® TV opens the door to the “4K TV Experience”. This document will help you get the most out of your TV. Please take a moment to register your TV at:
U.S.A.: https://productregistration.sony.com
Canada: https://www.sony.ca/registration

Four Steps to a 4K TV Experience
Set, Source, Sound, and Setup.

1. Set
   Now that you have made the best selection in LED-backlit LCD TV technology, be sure to remove all of the accessories from the packaging before setting up your TV.

2. Source
   To experience the stunning detail of your BRAVIA TV, you need access to HD programming.
   • Upgrade your signal or content source to high-definition (4K) by contacting your HD service provider.
   • Bring the astonishing resolution of your Sony 4K Ultra HD TV to life with Sony 4K Ultra HD Blu-ray Player. (The availability depends on region)
   • Receive over-the-air HD broadcasts with an HD-quality antenna connected directly to the back of your TV.
   Visit https://www.antennaweb.org for more information on antenna selection and setup.
   • Discover the wealth of entertainment now available on super-high-resolution Blu-ray Disc™ player and other Sony HD equipment.

3. Sound
   Complete the high-definition experience with a BRAVIA Sync™ surrounds sound system or A/V receiver from Sony.

4. Setup
   Install your TV and connect your sources. To help assure the highest quality for your HD experience, use Ultra High-Speed HDMI (High-Definition Multimedia Interface) cables.

This TV displays all video input signals in a resolution of 3840 dots × 2160 lines.

Note

• For details of supported formats, refer to the “Specifications” in this manual.
• For supported PC formats, refer to the online Help Guide.

Remote Control and TV

The remote control shape, layout, availability, and function of remote control buttons may vary depending on your region/country/TV model/TV settings.

1. (Google Assistant): Use Google 1 2Assistant . For hints on how to control your TV, press the Google Assistant button on the remote control and say “voice hints”.*1
   : On-screen menu navigation and selection.
   TV: Display the TV channel list or switch to input.

2. (Power)
   Number buttons (dot) APPS

3. YouTube™ / NETFLIX / Disney+ / Prime Video / Color buttons

4. GUIDE: Display the digital program guide of TV or Cable/Satellite box 3
   DVR: Display the Rec list of DVR3.
   INPUT: Display and select the input source, etc.
   (Quick settings): Display Quick Settings.
   BACK HOME

5. VOL +/– (Volume)
   JUMP
   MUTE*4
   CH +/– (Channel)

6. AUDIO: Select the sound of a multilingual source or dual sound (depending on the program source).
   SUBTITLE/CC
   HELP: Display the Help menu.

●REC: Record the currently viewed program on DVR*3.
DISPLAY: Display information.

7. *BUILT-IN MIC SWITCH1:** Turn on/off the built-in MIC.
8. (Power)
9. Remote Control sensor / Light sensor / LED
10. Built-in MIC12: To enable the built-in MIC, press the Google Assistant button on the remote control and follow the on-screen instructions.
    1 Only on limited region/country/TV model/language.
    2 Google Assistant requires an Internet connection.
    3 [Cable/Satellite box setup] setting is required.
    4 Accessibility shortcut is available by pressing and holding MUTE.
    5 Power consumption will increase when the built-in MIC is enabled as it is always listening.

Guidelines for IR Remote Control

• Point your remote control directly at the IR sensor located on your TV.
• Make sure that no objects are blocking the path between the remote control and the IR sensor on your TV.

• Fluorescent lamps can interfere with your remote control; try turning off the fluorescent lamps.
• If you are having problems with the remote control, reinsert or replace your batteries and make sure that they are correctly inserted.

Installing the TV to the Wall

*Using the optional Wall-Mount Bracket (SU-WL855 only) (not supplied)
To Customers:
For product protection and safety reasons, Sony strongly recommends that the installation of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:**
Provide full attention to safety during the installation, periodic maintenance, and examination of this product.

Wall-Mount Bracket Installation Information
For instructions on Wall-Mount Bracket installation, see the Installation Information (Wall-Mount Bracket) on the Sony Customer Support website for your TV model at the following address.
https://www.sony.com/am/support

• Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV’s weight.

• Sony is not liable for any damage or injury caused by mishandling or improper installation.

• The length of the screw for the Wall-Mount Bracket differs depending on the Wall-Mount Bracket thickness. Please refer to the below illustration.

• Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to attach the Table-Top Stand.
  Keep the screws away from small children.
  Note

• Read the supplied safety documentation for additional safety information.

• Only on a limited region/country/TV model.

Using the optional Wall-Mount Bracket (Except SU-WL855) (not supplied)
This TV instruction manual only provides the steps to prepare the TV for Wall- Mount installation before it is installed on the wall.
Your TV can be mounted to a wall using a suitable Wall-Mount Bracket (not supplied). If the Table-Top Stand is attached to the TV, the TV may require detaching the Table-Top Stand; see “Detaching the Table-Top Stand from the TV”.
Prepare the TV for the Wall-Mount Bracket before making cable connections.

For product protection and safety reasons, Sony strongly recommends that the installation of your TV on the wall be performed by qualified professionals. Do not attempt to install it yourself.

• Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV’s weight.

• The screws for installing the Wall-Mount Bracket to the TV are not supplied.

• The length of the screw for the Wall-Mount Bracket differs depending on the Wall-Mount Bracket thickness. Please refer to the below illustration.

• Refer to the following table for the wall-mount hole pattern.

• Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to attach the Table-Top Stand. Keep the screws away from small children.
  Note

• Read the supplied safety documentation for additional safety information.

• For more detailed information, visit the Sony Customer Support website.*

• Only on a limited region/country/TV model.

  1. Remove the screws from the rear of the TV.
  2. Attach the Wall-Mount Attachment (supplied with the TV) to the rear of the TV (to make it parallel with the wall).
  3. Attach the Wall-Mount Bracket (supplied) using the screws (not supplied).

Note

• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to fasten the Wall-MountAttachment when attaching them to the TV. Use only a flat head screwdriver to install the Wall-Mount Attachment. The use of another tool might result in over-torquing the Wall-Mount Attachment and damaging the TV.

Detaching the Table-Top Stand from the TV

1. Remove one side of the Table-Top Stand at a time. Firmly hold the Table-Top Stand securely with both hands while the other people lift up the TV.
2. Repeat the previous step and remove the other side of the Table-Top Stand.

Note

• Three or more people are required to detach the Table-Top Stand.
• Be careful not to use excessive force while detaching the Table-Top Stand from the TV as it may cause the TV set to fall resulting in personal injury or physical damage to the TV.
• Take care when handling the Table-Top Stand to prevent damage to the TV.
• Be careful when lifting the TV as the Table-Top The stand is detached, the Table-Top Stand may topple over and cause personal injury.
• Take care when removing the Table-Top Stand from the TV to prevent it from falling over and damaging the surface that the TV is sitting on.
• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.
• Be sure the TV is vertical before turning it on. To avoid uneven picture uniformity do not power on the TV with the LCD panel facing down.

Troubleshooting

General troubleshooting for issues like:
black screen, no sound, frozen picture, TV does not respond, or network is lost, do the following steps.

1. Restart your TV by pressing the power button on the remote control for about five seconds. The TV will restart. If the TV does not recover, try unplugging the AC power cord then press the power button on the TV and release it. Wait for two minutes, and plug in the AC power cord. Or, press the power button on the TV for about 40 seconds until the TV turns off.
2. Refer to the Help menu by pressing HELP on the remote control.
3. Connect your TV to the Internet and perform a software update. Sony recommends you keep your TV software updated. Software updates provide new features and performance improvements.
4. Visit the Sony support website (information provided at the end of this manual).
5. Perform the factory data reset.
   When you plug in the TV, the TV may not be able to turn on for a while even if you press the power button on the remote control or the TV.
   It takes time to initialize the system. Wait for about one minute, then operate it again.
   How to reset the TV to factory settings WARNING: The reset will clear all of your customized settings including the parental lock setting.
   • You can reset the TV to factory settings by selecting [Factory data reset]. How to select [Factory data reset], refer to the online Help Guide.
   • To force factory data to reset, unplug the AC power cord. Press and hold the button on the TV, then plug in the AC power cord.
   • For security purposes, be sure to remove all personal and account information before discarding, selling, or passing your TV to someone else by unlinking/ unregistering, signing out of, and deactivating all network services, as well as factory, resetting the TV.

The remote control does not function.

• Replace the batteries.

The parental lock password has been forgotten.

• Enter 4357 for the PIN and enter the new PIN.

The restricted profile password has been forgotten.

• Perform the force factory data reset.

Specifications

System
TV system: Depend on your country/area selection/TV model
NTSC: American TV Standard
ATSC (8VSB Terrestrial): ATSC compliant 8VSB
NEXTGEN TV: ATSC 3.0 compliant (Single tuner)
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Channel coverage: Depend on your country/area selection/TV model Analog terrestrial: 2 – 69 / Digital terrestrial: 2 – 69*1
Analog Cable: 1 – 135 / Digital Cable: 1 – 135
Panel system: LCD (Liquid Crystal Display)
Panel, LED Backlight
Speaker output: 10 W + 10 W
Wireless technology
Protocol IEEE 802.11a/b/g/n/ac
Bluetooth® Version 4.2

Input/Output jacks
CABLE/ANTENNA
75 ohm external terminal for RF inputs VIDEO IN
Video/Audio input (mini jack)
HDMI IN 1/2/3/4 (HDCP 2.3-compatible)
Video:
4096 × 2160p (60 Hz)23, 4096 × 2160p(24 Hz)2, 3840 ×2160p (24, 30 Hz), 1080p (30, 60,120 Hz), 1080/24p, 1080i (60 Hz), 720p(30, 60 Hz), 720/24p, 480p, PCFormats
3, 3840 × 2160p (60 Hz)4
3840 × 2160p (120 Hz)35
Audio:
In eARC (Enhanced Audio ReturnChannel) mode
Refer to the online Help Guide for details.
Except for the eARC mode
5.1 channel linear PCM: 32/44.1/48/88.2/96/176.4/192 kHz 16/20/24 bits, Dolby Audio, Dolby Atmos, DTS
eARC/ARC (Enhanced Audio Return
Channel/Audio Return Channel) (HDMI IN 3 only)6
In eARC mode
Refer to the online Help Guide for details.
In ARC mode
Two-channel linear PCM: 48 kHz 16 bits, Dolby Audio, Dolby Atmos, DTS
DIGITAL AUDIO OUT (OPTICAL)
Digital optical jack (Two-channel linear
PCM: 48 kHz 16 bits, Dolby Audio, DTS)
(Stereo mini jack)
Headphone

USB port 1 supports High-Speed USB (USB 2.0)
USB port 2 supports SuperSpeed USB (USB 3.1 Gen 1)
LAN
10BASE-T/100BASE-TX connector
(Depending on the operating environment of the network, connection speed may differ. The communication rate and quality are not guaranteed.)
Home Network supported files and formats4
REMOTE
RS-232C mini-jack, IR IN mini-jack
These jacks are for receiving the external control signal.
Power and others
Power requirements
110 V – 240 V AC, 50/60 Hz (the U.S.A./Canada 120 V AC, 60 Hz)
Power consumption
In use
XR-75X90J / 75X90CJ: 304 W
XR-65X90J / 65X90CJ: 240 W
XR-55X90J / 55X90CJ: 197 W
XR-50X90J: 159 W
In standby78
Less than 0.5 W with 120 V AC and less than 0.5 W with 240 V AC
Screen size (measured diagonally) (Approx.)
XR-75X90J / 75X90CJ: 189.3 cm /
74.5 inches (75″ class)
XR-65X90J / 65X90CJ: 163.9 cm /
64.5 inches (65″ class)
XR-55X90J / 55X90CJ: 138.8 cm /
54.6 inches (55″ class)
XR-50X90J: 125.7 cm / 49.5 inches (50″ class)
Display resolution (horizontal × vertical) (pixels)
3840 × 2160
Output rating
500 mA (for USB 1), 900 mA (for USB 2)
Dimensions (Approx.) (w × h × d) (mm) /(inches)
with stand
XR-75X90J / 75X90CJ: 1675 × 1040 × 410 /66 × 41 × 161/4
XR-65X90J / 65X90CJ: 1452 × 905 × 338 /57 133/4 × 35/4 × 13/8
XR-55X90J / 55X90CJ: 1233 × 784 × 338 /48 573/8 × 30/8 × 13/8XR-50X90J: 1119 × 715 × 286 / 44/4× 1111/8 × 283/8
without stand
XR-75X90J / 75X90CJ: 1675 × 962 × 73 /66 × 37 7 7 /8 × 2 /8
XR-65X90J / 65X90CJ: 1452 × 834 × 72 /57 177/4 × 32/8 × 2/8
XR-55X90J / 55X90CJ: 1233 × 711 × 72 /4857/8 × 28 × 2/8
XR-50X90J: 1119 × 649 × 70 / 44/8× 215/8 × 257/8
wall-mount hole pattern
XR-75X90J / 75X90CJ: 300 × 300 mm
XR-65X90J / 65X90CJ: 300 × 300 mm
XR-55X90J / 55X90CJ: 300 × 300 mm
XR-50X90J: 200 × 200 mm
wall-mount screw size (mm)
M6 (length: see “Installing the TV to the Wall”.)
Mass (Approx.) (kg) / (lb.)
with stand
XR-75X90J / 75X90CJ: 34.5 / 76
XR-65X90J / 65X90CJ: 23.8 / 52.5
XR-55X90J / 55X90CJ: 18.3 / 40.4
XR-50X90J: 14.1 / 31.1
without stand
XR-75X90J / 75X90CJ: 33.3 / 73.4
XR-65X90J / 65X90CJ: 22.9 / 50.5
XR-55X90J / 55X90CJ: 17.4 / 38.4
XR-50X90J: 13.5 / 29.8
Others
Optional accessories
Wall-Mount Bracket: SU-WL855
(XR-75X90J / 75X90CJ / 65X90J / 65X90CJ /55X90J / 55X90CJ only)
Operating temperature: 0 ºC – 40 ºC /32 ºF – 104 ºF
1 2 – 36 for NEXTGEN TV scanning range in the U.S.A.
2 When 4096 × 2160p is input and [Wide mode] is set to [Normal], the resolution is displayed as 3840 × 2160p. To display 4096 × 2160p, set [Wide mode] setting to [Full 1] or [Full 2].
3 Refer to the on-screen menu to set [HDMI signal format].
4 Refer to the online Help Guide for details.
5 HDMI IN 3 & 4 only. Use the Ultra High-Speed HDMI Cable to connect.
6 Connect your audio system to the HDMI IN 3 to route TV audio to your audio system.
7 Specified standby power is reached after the TV finishes the necessary internal processes.
*8 Standby power consumption will increase when your TV is connected to the network.
Note

• Optional accessories availability depends on countries/region/TV model/stock.
• Design and specifications are subject to change without notice.
• Subscriptions for services and applications may be required and additional terms, conditions, and/or charges may apply when using Google Assistant.

Licensing Information

• The terms HDMI, HDMI High-Definition
  Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

• Dolby, Dolby Vision, Dolby Atmos, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 1992-2020 Dolby Laboratories. All rights reserved.

• Gracenote, the Gracenote logo, and the logotype, the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote, Inc. in the United States and/or other countries.

• Google TV and related logos are trademarks of Google LLC.

• For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, Digital Surround, and the DTS logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2020 DTS, Inc. ALL RIGHTS RESERVED.

• Netflix is a registered trademark of Netflix, Inc.

• TUXERA is a registered trademark of Tuxera Inc. in the US and other countries.

• All other trademarks are the property of their respective owners.

For Your Convenience
Online Registration:
Be sure to register your TV.
United States
https://productregistration.sony.com
Canada
https://www.sony.ca/registration

Support

https://www.sony.com/tvsupport

© 2021 Sony Corporation
Printed in Mexico

References

• Patents - DTS
• Select your country or region | Sony USA
• Sony Corporation - NOTICES AND LICENCES FOR SOFTWARE USED IN THIS TELEVISION
• Asistencia a los productos Sony | Sony América Latina
• Complete Your Registration (US) | Sony Product Registration en
• Sony Corporation - Home
• AntennaWeb - Antenna Signal Prediction
• Sony América Latina
• Complete Your Registration (CA) | Sony Product Registration
• Sony Canada
• Sony Canada
• Sony Group Portal - Home
• Select your country or region | Sony USA
• Support for TVs, Monitors & Projectors | Sony USA 
• Sony Corporation - Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>