BOOMPODS BOOMCARD Application User Manual
- June 16, 2024
- Boompods
Table of Contents
BOOMPODS BOOMCARD Application
INTRODUCTION
Open or download the free Apple Find My app from the App Store.
Use of the Works with Apple badge means that a product has been designed to
work specifically with the technology identified in the badge and has been
certified by the product manufacturer to meet Apple Find My network product
specifications and requirements. Apple is not responsible for the operation of
this device or use of this product or its compliance with safety and
regulatory standards.
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS
and watch OS are trademarks of Apple Inc., registered in the U.S. and other
countries. 10S is a trademark or registered trademark of Cisco in the U.S. and
other countries and is used under license.
How to use
switch on: press for 5 seconds.
open Apple Find My App.
tap: Items “+”
tap: Add Other Item.
BOOMCARD will now show .
Tap: Connect.
to disconnect : press 5 times quickly.
to factory reset : first remove from Find My App, press 2 times, then
immediately press and hold for 8 seconds.
Please read instructions before use, and keep far future reference.
WARNING:
Do not ingest battery. Chemical burn hazard. Coin battery inside. Swallowing
can cause severe internal bums in 2 hours, even death. Keep batteries away
from children.
If battery compartment doesn’t close securely, stop using product. Keep away
from children. If swallowed or inserted, seek immediate medical attention.
Product not a toy or edible. Mobile device casings can weaken signal and
reduce visibility.
Avoid large metal objects near device and BOOMCARD. Interference with
Bluetooth signal.
Caution: Lithium battery inside. Risk of explosion with incorrect use. Avoid
direct heat and mechanical stress. Do not disassemble BOOMCARD. Risk of
electric shock and voiding warranty.
Warranty- UK. & Europe
Your BOOMPODS product is guaranteed against any defects in material or
workmanship for 2 years from the date of original purchase providing it has
not been disassembled and it has not suffered accidental damage.
Warranty- US & Canada
Your BOOMPODS product is guaranteed against any defects in material or
workmanship for 1 years from the date of original purchase providing it has
not been disassembled and it has not suffered accidental damage.
The device must be used in accordance with the user manual.
The warranty is subject to presentation of the original invoice or receipt
from the retailer and does not apply to normal wear and tear or to any device
that has been misused or tampered with. It should be returned to the local
service centre, the service centre will not bear any shipping cost of the
returned item.
Please check www.boompods.com for your local
service centre
The Declaration of Conformity can be found at:
https://www.boompods.com/product/BOOMCARD
Hereby, Boompods declares that the radio equipment type
[Tracker with Bluetooth] is in compliance with Directive 2014/53/EU.
FCC ID: 2A36Q-BOOMCARD
BOOMPODS is a trademark of BOOMPODS LTD. BOOMPODS ©2023 All Rights.
BOOMPODS Ltd (UK), Norwich NR117AQ, UK.
BOOMPODS (EU), Granica , 05-806. PL.
info@boompods.com
Registered No: 08147066. Made in China.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment hos been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits ore designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by fuming the equipment off and on, the user is encouraged ta try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet an a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Online manuals
